Different cationic surfactants-modified silica nanoparticles for Pickering emulsions
The effects of cationic surfactants on the properties of Pickering emulsions stabilized by silica nanoparticles (nano-SiO 2 ) were investigated. The zeta potential , three-phase contact angle ( θ ), and dynamic interfacial tension (DIT) were measured to analyze the interaction between hydrophilic nano-SiO 2 and four different cationic surfactants (i.e., dodecyltrimethylammonium bromide [DTAB], bis-quaternary ammonium salts [BQAS-12], multiple quaternary ammonium salts [MQAS-12], and dimethyldioctadecylammonium bromide [DDAB-18]). All these surfactants can naturally improve the stability of Pickering emulsions induced by hydrophilic nano-SiO 2 . The nano-SiO 2 /MQAS-12 mixtures exhibited the best ability to stabilize the O/W emulsions, followed by nano-SiO 2 /BQAS-12 mixtures. The nano-SiO 2 /DDAB-18 mixtures can induce emulsion inversion from O/W to W/O. All emulsions exhibited excellent salt tolerance and acid-base resistance properties. Determining the zeta potential showed that nano-SiO 2 had the highest negative charge at the pH of 9.5. Thus, the surfactant molecules can be adsorbed remarkably on the nano-SiO 2 surface. Modification with different cationic surfactants can significantly increase the θ value of nano-SiO 2 , but the bilayers for DTAB-12, BQAS-12, and MQAS-12, except for DDAB-18, were adsorbed. DIT curves indicated that competitive adsorption of the surfactants occurred between the oil/water interface and nano-SiO 2 surface. The competitive adsorption of MQAS-12 was stronger than those of BQAS-12 and DTAB-12. The nano-SiO 2 /DDAB-18 mixture had an apparent induction region and required a considerable amount of time to reach equilibrium. The modified nano-SiO 2 was also not adsorbed in the oil/water interface spontaneously, which may be due to the large size of particles compared with small surfactant molecules.
危险品化学品经营许可证（带存储）