Light-Science & Applications
·
2025
·Vol. 14
·期 1
·1-9
·
IF 23.4
Chen Zhong,Man Zhongwei,Rao Shichao,Zhao Jinxing,Wang Shuaibing,Zhang Runtong,Teng Feng,Tang Aiwei
Recently, colloidal quantum dots (QDs) with high luminescent efficiency and tunable colors have become ideal materials for next-generation display devices. Direct photolithography is a powerful tool for patterning QD devices, but it faces the serious issue of degradation in the photophysical properties of the patterned QDs. Here, we use relatively rigid cyclopentane as a bridging group to design the crosslinker CPTA, achieving high-resolution direct photolithography of QDs with nearly nondestructive under ambient conditions. The key to the crosslinker design is the introduction of a rigid bridging group that elevates the LUMO level, providing a stronger energy barrier to prevent QD electrons from being trapped or undergoing non-radiative recombination, thus preserving their PL and EL properties. The efficient and high-resolution RGB line and dot arrays were fabricated with pixel sizes down to 1 μm and a resolution of up to 6350 PPI. The patterned RGB QD films, especially red QDs, maintained their optical and optoelectronic properties, with patterned red QLEDs achieving peak external quantum efficiency (EQE) of 21% and a maximum luminance ( L max ) of ~180,000 cd m⁻², matching pristine devices. These results highlight the importance of photo-crosslinker design for nondestructive QDs patterning, paving the way for advanced display applications in patterned QLED technology.
研究领域:
材料科学
·
纳米技术
·
光电子学
·
显示技术
·
光刻技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Huiyu Jiang,Yanlong Bu,Geao Liu,Wen Zhang,Xian-Wei Cheng
For protein fibers, polycarboxylic acids represent a green strategy to enhance durability without using formaldehyde. This study evaluated the physical and flame retardant properties of silk fabrics treated with three formaldehyde-free crosslinkers : citric acid (CA), 1,2,3,4-butanetetracarboxylic acid (BTCA), and 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTCA). Results showed that these acids bond with silk protein through esterification and amidation , improving washing durability. Particularly, PBTCA integrates phosphorus into silk, boosting flame retardancy. While BTCA led to the highest weight gain and improved wrinkle recovery, it negatively impacted the tensile strength and softness of silk fabrics. Conversely, PBTCA adeptly balanced enhanced wrinkle resistance with minimal effects on tensile strength and softness, and least affected the silk fabrics' whiteness, thus preserving its aesthetic appeal. All crosslinkers improved flame retardancy, but PBTCA displayed superior performance, achieving a limiting oxygen index of 32.4 % at an 80 g/L concentration. In vertical burning tests, PBTCA treated silk fabrics showed reductions in damage length and demonstrated self-extinguishing properties, qualifying them for a higher flame retardant grade. Phosphorus in PBTCA promotes char formation during combustion, essential for effective flame retardation and smoke reduction. This research highlights the exceptional potential of silk treated with PBTCA, showcasing its suitability for demanding applications.
研究领域:
纺织科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2014
·
IF 4.258
Chusheng Liu,Weijia Chen,Guangxin Yuan,Yao Xiao,Jacques Crommen,Shihai Xu,Zhengjin Jiang
In order to investigate the effects of the crosslinker on the separation performance of polar zwitterionic sulfoalkylbetaine-type monolithic columns, three crosslinkers, i.e. 1,4-bis(acryloyl)piperazine (PDA), ethylene dimethacrylate (EDMA) and N , N ′-methylenebisacrylamide (MBA), were copolymerized with the hydrophilic monomer N , N -dimethyl- N -acryloyloxyethyl- N -(3-sulfopropyl)ammonium betaine (SPDA). The chromatographic properties of the three hydrophilic sulfoalkylbetaine-type monolithic columns, including column efficiency, permeability, porosity and separation mechanism, were systematically compared using scanning electron microscopy or micro-HPLC. Good selectivity in micro-HPLC separations was achieved on all three monolithic columns. The results indicate that the polarity of sulfoalkylbetaine-type monolithic columns may be related to the polarity of the crosslinker, which further affects column selectivity and efficiency. A particularly high column efficiency (100,000 plates/m) was obtained on the novel poly(SPDA- co -PDA) monolithic column at a linear velocity of 1 mm/s using thiourea as test analyte. A higher resolution was also observed for nucleobases, nucleosides and hydrophilic organic acids on this novel poly(SPDA- co -PDA) monolithic column compared to the other two columns.
研究领域:
分析化学
·
色谱技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2016
·Vol. 133
·期 19
·
IF 1.866
Honggang Mei,Guowen Chen,Qingzeng Zhu,Peng Dong,Dannan Zhao,Waqas Ahmed Raza
Two types of vinyl silicone oil (VSO), allyl-capped hyperbranched polycarbosilane (HBP), and triethoxysilane (TES) were employed to synthesize macromolecular silane coupling agent (MMSCA) by hydrosilylation. VSOs, HBP, and the hydrosilylated products were used as crosslinker, respectively, to improve weak mechanical properties of silicone rubber (SR). Structures of the crosslinkers were studied by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and nuclear magnetic resonance (NMR). Crosslinking density test and scanning electron microscope (SEM) observation showed an increased interaction between silicone rubber and fumed silica by the use of MMSCA. Mechanical properties of the resulted composites using MMSCAs were increased to varying degrees compared with those possessing crosslinkers without ethoxy group. MMSCAs were effective for further property enhancements of composites. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43415.
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS LETTERS
·
2023
·
IF 3
Cijian Zhang,Shicong Song,Qian Liu,Jiahui Li,Qi Cao,Shouhai Zhang,Xigao Jian,Zhihuan Weng
The innovative aerogel obtained by introducing bisphenol A-type polysulfone (PSF) as a precursor has excellent stability and can meet the need for thermal insulation at higher temperatures. In this study, PSF was modified by chloromethylation in a simple one-step process, and then PSF aerogels with tunable structural properties were tailored by changing the degree of chloromethyl and types of amino crosslinkers. This is the first report of the introduction of PSF into the aerogel field as far as we know. The density and volume shrinkage of the obtained aerogels were as low as 46.7 mg/cm 3 and 21.3%, respectively. Compared with aerogels made with triethylenetetramine as the cross-linking agent, aerogels obtained with polyetheramine D230 exhibited better structural stability, higher specific surface area and lower thermal conductivity (down to 0.036 W/mK), which was more favorable for the thermal insulating ability of the aerogel. These findings provide a new design idea for the selection of precursors for polymer-based aerogels.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 100
·56791-56797
·
IF 3.708
Yulin Cui,Mei Tan,Aidi Zhu,Mingyu Guo
Strain hardening and high resilience are two unique mechanical characteristics of many soft biological hydrogels. However, these properties, especially the strain hardening behaviour, are generally not seen in synthetic polymer hydrogels. Here, hydrogels are prepared by free-radical copolymerization of acrylamide and chain-extended vinyl-modified pseudo-polyrotaxane, which acts as a multifunctional crosslinker. The reactive pseudo-polyrotaxane is based on a β-cyclodextrin monomer and amine-terminated PEG–PPG–PEG (Pluronic F127). The obtained hydrogels can be stretched from 10 to more than 26 times their original length before breaking and withstand a compression strain of 95% and even 98% without fracture. Tensile stretching tests show obvious strain hardening behaviours in high stretching and compression deformation regimes. The strain hardening behaviour in stretching deformation is considered to be the orientation and aggregation of the movable crosslinkers along the axial polymer backbone. Moreover, the formation of a second supramolecular network due to the chain-extension effect may also be responsible for it. Highly resilient behaviours with almost no hysteresis and residual strains are also observed even with a maximum strain of λ = 12 because of the inherent freely movable character of the crosslinkers.
研究领域:
材料科学
·
生物医学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2019
·Vol. 137
·期 12
·48486
·
IF 2.188
Xiaojing Zhang,Weiwei Shen,Jingcheng Dou,Yang Meng,Shaoming Fang,Ruixue Liu
In this study, water-soluble octa(3-chloroammoniumpropyl) silsesquioxane (OCAPS) was found to aggregate into nanoparticles with a positive charge in solution, which can attract persulfate anion radical to initiate N-isopropylacrylamide monomers. Due to the electrostatic and hydrogen bond interaction between OCAPS and poly(N-isopropylacrylamide) (PNIPAM) chain, OCAPS can act as an effective physical crosslinker to result in a nanocomposite hydrogel (OCAPS-PNIPAM) with very small loading N, N′-methylene-bisacrylamide (50–100 ppm). The incorporation of OCAPS increases the crosslinking degree of the PNIPAM hydrogel and decreases the swelling ratio in deionized water. The mechanical properties of OCAPS-PNIPAM hydrogel were enhanced greatly by the presence of OCAPS and can be adjusted by the feed ratio. The compression and elasticity moduli vary from 3.52 to 7.59 kPa and 7.67 to 33.91 kPa, respectively. The tensile strength ranges from 6.82 to 243.41 kPa with fracture energy between 503.5 and 4781.7 J·m −2 . Rheological measurements suggest that OCAPS-PNIPAM hydrogels have stable networks and the loss factor decreases as increasing OCAPS content. OCAPS-PNIPAM hydrogels also can self-heal under certain conditions with low crosslinker loading. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137 , 48486.
研究领域:
材料科学
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2019
·Vol. 11
·期 7
·1142
·
IF 3.164
Jianye Ji,Xin Ge,Xiaoyan Pang,Ruoling Liu,Shuyi Wen,Jiaqi Sun,Weijie Liang,Jianfang Ge,Xunjun Chen
Methoxyl-capped MQ silicone resin (MMQ) was first synthesized by the hydrosilylation of vinyl-containing MQ silicone resin and trimethoxysilane and then used in condensed room-temperature vulcanized (RTV) silicone rubber as a self-reinforced cross-linker. Results show that modified silicone rubber exhibits good light transmission. Compared with unmodified silicone rubber, the hardness, tensile strength and elongation of MMQ at the break are increased by 26.4 A, 2.68 MPa and 65.1%, respectively. In addition, the characteristic temperature of 10% mass loss is delayed from 353.5 °C to 477.1 °C, the temperature at maximum degradation rate is also delayed from 408.9 °C to 528.4 °C and the residual mass left at 800 °C is increased from 1.2% to 27.7%. These improved properties are assigned to the synergistic effect of the rigid structure of MMQ, the formation of a dense cross-linking structure in polymers and the uniform distribution of MMQ cross-linking agent in RTV silicone rubber.Keywords:cross-linker;MQ silicone resin;hydrosilylation;silicone rubber;modified
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 44
·23036-23042
·
IF 3.708
Songqi Ma,Yanhua Jiang,Xiaoqing Liu,Libo Fan,Jin Zhu
The utilization of soybean oil-based UV coatings depends on the introduction of petroleum-based comonomers or crosslink agents. Thus, in this paper, a bio-based crosslink agent (GACA) for UV curable coatings was synthesized from gallic acid and its chemical structure was confirmed by FT IR, 1H NMR and 13C NMR. Crosslinked networks with high biobased content of more than 88% were obtained after co-photopolymerization between acrylated epoxidized soybean oil (AESO) and GACA. The thermal, mechanical and coating properties of these GACA crosslinked AESO networks were investigated and a commonly used crosslink agent triallyl isocyanurate (TAIC) was used as the control. GACA exhibited more functional groups and better copolymerization with AESO than TAIC, resulting in the higher gel content, crosslink density, tensile strength and modulus as well as much better coating properties (reflected by the higher pencil hardness, better wear resistance and adhesion) of GACA crosslinked AESO networks than TAIC crosslinked AESO networks. These results indicated that GACA exhibited great potential to replace petroleum-based crosslink agents such as TAIC, and high-performance soybean oil-based UV-cured coatings with high biobased content could be achieved after introducing GACA.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
MOLECULES
·
2024
·Vol. 29
·期 12
·2798
·
IF 4.2
Shenglong Shi,Jinsheng Sun,Shanbo Mu,Kaihe Lv,Jingping Liu,Yingrui Bai,Jintang Wang,Xianbin Huang,Jiafeng Jin,Jian Li
To investigate the effect of the chemical composition of a metal–organic crosslinker on the performances of fracturing fluid in high-temperature conditions, four zirconium (Zr) crosslinkers and one aluminum–zirconium (Al-Zr) crosslinker with a polyacrylamide were used. The crosslinkers possessed the same Zr concentration, but they differed in component amounts and the order of the addition of the crosslinker components, leading to different chemical compositions in the crosslinkers. The fracturing fluids prepared by different tested crosslinkers were compared in terms of properties of rheological behavior, sand-carrying ability, microstructure, and gel breaking characteristics. The results showed that the fracturing fluids prepared by zirconium lactic acid, ethanediamine, and sorbitol crosslinkers offered the slowest viscosity development and highest final viscosity compared to the zirconium lactic acid crosslinker and the zirconium lactic acid and ethanediamine crosslinker. The zirconium sorbitol, lactic acid, and ethanediamine crosslinker exhibited a faster crosslinking rate and a higher final viscosity than the zirconium lactic acid, ethanediamine, and sorbitol crosslinker; the crosslinker showed crosslinking density and crosslinking reactivity, resulting in more crosslinking sites and a higher strength in the fracturing fluid. The Al-Zr-based crosslinker possessed better properties in temperature and shear resistance, viscoelasticity, shear recovery, and sand-carrying ability than the Zr-based crosslinker due to the synergistic crosslinking effect of aluminum and zirconium ions. The tertiary release gelation mechanism of the Al-Zr-based fracturing fluid achieved a temperature resistance performance in the form of continuous crosslinking, avoiding the excessive crosslinking dehydration and reducing viscosity loss caused by early shear damage. These results indicated that the chemical compositions of metal–organic crosslinkers were important factors in determining the properties of fracturing fluids. Therefore, the appropriate type of crosslinker could save costs without adding the additional components required for high-temperature reservoirs.
研究领域:
石油工程
·
材料化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Wenhui Li,Yuqiu Wu,Si Long,Zhi Chen,Liangzhi Li,Xin Ju
The cascade of sugar isomerases is one of the most practical methods for producing rare sugars, and enzyme immobilization endows it with high economic efficiency, operational convenience and reusability. However, the most employed cross-linker glutaraldehyde (GA) has the disadvantages of enzyme deactivation and limitation of substrate binding. Herein, three compounds, glyoxal, GA, and 2,5-furandicarboxaldehyde (DFF) were evaluated within a previously developed cascade comprising ribose-5-phosphate isomerase and D-tagatose-3-epimerase to prepare D-ribulose form D-xylose. Analyses of surface morphology, element and chemical bond revealed that all compounds effectively cross-linked the isomerases. High concentration of the cross-linkers was generally beneficial for binding protein and preventing enzyme leak during reusing cycles. Glyoxal performed the highest immobilization rate, though it hadn't been employed as a cross-linker for enzyme immobilization. DFF mediated cross-linking revealed the highest activity recovery, substrate conversion and residual activity after reusing cycles, suggesting better biocompatibility than glyoxal and GA. After 8 rounds of recycling, the residual activity of enzyme immobilized by DFF was 61.4 %, ∼30 % higher than that of GA. This study proved a potential alternative cross-linker DFF for the immobilization of enzyme cascade with high activity recovery and reusability, which could promote the efficient production of high value-added products from biomass monosaccharides.
研究领域:
生物化学
·
酶工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2019
·Vol. 9
·期 4
·513
·
IF 4.034
Jian Hu,Hao Dai,Yanbo Zeng,Yiwen Yang,Hailong Wang,Xudong Zhu,Lei Li,Guobao Zhou,Ruoyu Chen,Longhua Guo
In this study, we report a cross-linker-based poly(ionic liquid) (PIL) for the sensitive detection of 4-nonylphenol (4-NP). PIL was poly(1,4-butanediyl-3,3′-bis-l-vinylimidazolium dibromide) (poly([V2C4(mim)2]Br2)). Poly([V2C4(mim)2]Br2) was prepared via one-step free-radical polymerization. The poly([V2C4(mim)2]Br2) was characterized by infrared spectroscopy, Raman spectroscopy, thermal gravimetric analyzer and scanning electron microscope. The poly([V2C4(mim)2]Br2) was then drop-cast onto a glassy carbon electrode (GCE) to obtain poly([V2C4(mim)2]Br2)/GCE. In comparison with a bare GCE, poly([V2C4(mim)2]Br2)/GCE exhibited higher peak current responses for [Fe(CN)6]3−/4−, lower charge transfer resistance, and larger effective surface area. While comparing the peak current responses, we found the peak current response for 4-NP using poly([V2C4(mim)2]Br2)/GCE to be 3.6 times higher than a traditional cross-linker ethylene glycol dimethacrylate (EGDMA) based poly(EGDMA) modified GCE. The peak current of poly([V2C4(mim)2]Br2) sensor was linear to 4-NP concentration from 0.05 to 5 μM. The detection limit of 4-NP was obtained as 0.01 μM (S/N = 3). The new PIL based electrochemical sensor also exhibited excellent selectivity, stability, and reusability. Furthermore, the poly([V2C4(mim)2]Br2)/GCE demonstrated good 4-NP detection in environmental water samples.Keywords:poly(ionic liquid);cross-linker;electrochemical detection;4-nonylphenol
研究领域:
环境科学
·
分析化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）