ACS Applied Materials & Interfaces
·
2017
·
IF 7.504
Tianwen Xin,Yong Gu,Ruoyu Cheng,Jincheng Tang,Zhiyong Sun,Wenguo Cui,Liang Chen
Periosteum plays the pivotal role in neomineralization, vascularization and protection during bone tissue regeneration. However, many artificial periosteum focused only on protection and lacked of the osteogenesis and angiogenesis functional capacity. In this study, we developed a novelty inorganic strengthened gelatin hydrogel membrane via inorganic and organic co-cross-linked double network as artificial periosteum for enhancing the durable angiogenesis and osteogenesis in bone reconstruction. Mesoporous bioactive glass nanoparticles (MBGNs) chemically modified with photo-cross-linkable gelatin derivative (GelMA) were further incorporated into GelMA to fabricate an organic/inorganic co-cross-linked hydrogel membrane (GelMA-G-MBGNs). The GelMA-G-MBGNs hydrogel membrane displayed better mechanical property, durable degradation time, pH stable, biomineralization and long-term ion release. In vitro study demonstrated that, when compared with GelMA or GelMA/MBGNs, the GelMA-G-MBGN membrane significantly promoted osteogenic differentiation while maintaining stable local pH, which is conducive to cell adhesion and proliferation. Finally, the GelMA-G-MBGN membrane shows a superior artificial periosteum with superior capacity in angiogenesis and osteogenesis for accelerating new and mature lamellar bone formation in rat calvarial critical size defect. This co-cross-linked hydrogel membrane implied a promising strategy for the development of advanced periosteum biomaterials with excellent handle and bone repairing properties.
研究领域:
生物材料学
·
组织工程学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Biomaterials Advances
·
2024
·
IF 5.5
Hu Hui,Yuheng Song,Hongmei Liu,Jiahui Fan,Zhou Sha,Hongchuang Li,Jian Lu,Qian Zhang,Xiang Fei,Meifang Zhu
Artificial periosteum is deemed a novel strategy for inducing endogenous bone regeneration, but ideal periosteum substitutes achieved by orchestrating a biomimetic microenvironment for bone regeneration remain a significant challenge. Here, we design and fabricate a hybridized nanofiber-based artificial periosteum with boosted osteoinduction properties. Via a “molecular cage” biomineralization strategy, nano-hydroxyapatite (nano-HAp) with a controllable size (∼22 nm) and excellent dispersion serves as unique nano-additives for water-soluble polyvinyl-alcohol (PVA)-based artificial periosteum. The PVA/HAp composite is electrospun into nanofibers to replicate the extracellular-matrix-inspired nanostructure for inducing cell adhesion, proliferation, and fate manipulation. A simple post-crosslinking treatment is subsequently applied to further booster its mechanical strength (6.6 MPa) and swelling stability. The optimized sample of C-PVA/HAp (10 wt% nano-HAp) artificial periosteum features excellent biocompatibility and remarkable in vitro mineralization. Cell experiments demonstrate that its effectively boasted cell modulation for enhanced osteogenesis without the aid of growth factors, showing a possible activation of the ERK/MAPK signaling pathway. This work provides an effective strategy for designing novel HAp nano-additives and expands the possibility of biomimetic fabrication for more advanced nanofiber-based artificial periosteum.
研究领域:
生物材料
·
组织工程
·
骨再生
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A
·
2023
·
IF 4.9
Feng Qian,Zongwang Huang,Wenbin Liu,Yanling Liu,Xi He
Segmental bone defects caused by trauma, tumor resection or congenital malformations are often reconstructed with autologous, allogeneic bone grafts or artificial bone materials, of which, about 5% ~ 10% will have delayed healing or even nonunion of fractures. The loss of periosteum and excessive accumulation of ROS in fracture site leads to the aging of osteoblasts and the decline of their proliferation and differentiation, thus affecting the fracture healing process. In this study, we prepared a functional modified artificial periosteum β-TCP/MnO 2 /PCL(β-TMP) by electrospinning with a function of catalyzing decomposition of H 2 O 2 . We examined the surface morphology of β-TMP, the concentration of Ca, P and Mn of β-TMP, as well as the diameter distribution range of nanofibers on β-TMP. Through X-ray diffraction patterns and Fourier transform infrared spectra, β-TMP was characterized and its hydrophilicity was tested. The release of Mn 2+ and Ca 2+ of 0.1 and 0.05% β-TMP in different pH values (7.4 and 5.5) determined by ICP. We also identified that β-TMP could reduce the level of ROS in cells by lowering the level of H 2 O 2 . 0%, 0.05% and 0.1% β-TMP displayed good cell compatibility, cell adhesion and cellular morphology in the condition with or without H 2 O 2 . 0.5% β-TMP showed compromised cell compatibility in normal condition, however, the compromised phenotypes could be partially rescued in the present of H 2 O 2 . Compared with 0%, 0.05% and 0.1% β-TMP displayed higher osteoblastic differentiation with or without H 2 O 2 in BMSCs as well as in MG-63. In sum, β-TMP helped osteogenesis and promoted repair of bone defects.
研究领域:
材料科学
·
再生医学
·
组织工程
·
骨科
✓ 已验证
DOI
PubMed
高影响因子
COMPOSITES PART B-ENGINEERING
·
2023
·
IF 13.1
Xi He,Ruideng Wang,Li Wang,Xinbo Wei,Moyan Zhou,Jiarui Tang,Xin Che,Ruichen Wang,Fang Zhou,Haifeng Liu
The periosteum plays a crucial role in both bone development and the healing process of bone fractures. However, few studies have focused on developing artificial periosteum due to the complexity of its construction and the biological risks for clinical practice. To address this issue, we proposed a strategy for the fabrication of a photocrosslinkable natural hydrogel nanofibrous membrane (SFMA-Lap@AcBP) based on methacrylated silk fibroin (SFMA), photoinitiator (Lap), acrylate bisphosphonate (AcBP) through combining electrospinning technology with hydrogel, mimicking the structure and function of periosteum to promote bone regeneration. AcBP were covalently attached to the SFMA hydrogel nanofibrous membrane via conjugation. With the degradation of SFMA-Lap@AcBP hydrogel nanofibrous membrane, the released BP-grafted derivates could promote bone regeneration. Moreover, SFMA-Lap@AcBP hydrogel membranes were found to be able to trap metal ions such as Mg 2+ and Ca 2+ in vivo , which might play a synergistic role in inducing complete bone regeneration. Furthermore, the hydrogel membranes had excellent cytocompatibility. They could imitate the microenvironment of the extracellular matrix, thereby offering structural and biochemical cues for the adhesion, proliferation, and differentiation of cells, without the need of exogenous cells or inductive growth factors, resulting in a facilitated osteogenesis. After implanting membranes into a cranial periosteal and bone defect in rats, both the amount and quality of new bone in the SFMA-Lap@AcBP group were found to be higher than those in the other groups. Therefore, the hydrogel membrane bionic periosteum was efficient and versatile in inducing bone regeneration, providing a potential strategy to address clinical issues.
研究领域:
生物材料
·
组织工程
·
生物医学工程
✓ 已验证
产品关联
DOI
高影响因子
Biofabrication
·
2023
·Vol. 15
·期 2
·025010
·
IF 9
Xin Sun,Jin Yang,Jie Ma,Tianchang Wang,Xue Zhao,Dan Zhu,Wenjie Jin,Kai Zhang,Xuzhou Sun,Yuling Shen,Neng Xie,Fei Yang,Xiushuai Shang,Shuai Li,Xiaojun Zhou,Chuanglong He,Deteng Zhang,Jinwu Wang
The periosteum is a connective tissue membrane adhering to the surface of bone tissue that primarily provides nutrients and regulates osteogenesis during bone development and injury healing. However, building an artificial periosteum with good adhesion properties and satisfactory osteogenesis for bone defect repair remains a challenge, especially using three-dimensional (3D) bioprinting. In this study, dopamine was first grafted onto the molecular chain of gelatin using N-(3-dimethylaminopropyl)-N'-ethylcarbodiimide hydrochloride and N-hydroxysuccinimide (NHS) to activate the carboxyl group and produce modified gelatin-dopamine (GelDA). Next, a methacrylated gelatin, methacrylated silk fibroin, GelDA, and graphene oxide nanosheet composite bioink loaded with bone marrow mesenchymal stem cells was prepared and used for bioprinting. The physicochemical properties, biocompatibility, and osteogenic roles of the bioink and 3D bioprinted artificial periosteum were then systematically evaluated. The results showed that the developed bioink showed good thermosensitivity and printability and could be used to build 3D bioprinted artificial periosteum with satisfactory cell viability and high adhesion. Finally, the 3D bioprinted artificial periosteum could effectively enhance osteogenesis both in vitro and in vivo. Thus, the developed 3D bioprinted artificial periosteum can prompt new bone formation and provides a promising strategy for bone defect repair.
研究领域:
组织工程
·
生物医学工程
·
再生医学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Bio
·
2022
·
IF 10.761
Wentao Zhang,Tianze Sun,Jing Zhang,Xiantong Hu,Ming Yang,Liwei Han,Gang Xu,Yantao Zhao,Zhonghai Li
The presence of periosteum can greatly affect the repair of a bone fracture. An artificial periosteum imitates the biological function of natural periosteum, which is capable of protecting and maintaining bone tissue structure and promoting bone repair. In our artificial periosteum, biocompatible methacrylate gelatin was used to provide the mechanical support of the membrane, E7 peptide added bioactivity, and Wharton's jelly provided the biological activity support of the membrane, resulting in a hydrogel membrane (G-E-W) for the chemotactic recruitment of bone marrow mesenchymal stem cells (BMSCs) and promoting cell proliferation and osteogenic differentiation. In an in vitro experiment, the G-E-W membrane recruited BMSCs and promoted cell proliferation and osteogenic differentiation. After 4 weeks and 8 weeks of implantation in a rat skull defect, the group implanted with a G-E-W membrane was superior to the blank control group and single-component membrane group in both quantity and quality of new bone. The artificial G-E-W membrane recruits BMSC chemotaxis and promotes cell proliferation and osteogenic differentiation, thereby effectively improving the repair efficiency of fractures and bone defects.
研究领域:
组织工程
·
生物材料
·
干细胞生物学
·
再生医学
·
骨科
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Today Bio
·
2022
·
IF 10.761
Xi He,Wenbin Liu,Yanling Liu,Kai Zhang,Yan Sun,Pengfei Lei,Yihe Hu
Bone nonunion or delayed union, caused by stripping or injuring of periosteum, is the most common sequelae of segmental bone defects. The preservation of periosteum, or the use of periosteal grafts, can significantly improve the integration of bone graft, speeding up the process of bone reconstruction. However, in most cases, periosteum cannot be preserved with bioactivity. Thus, it is pivotal to develop artificial periosteum. In this study, artificial periosteum of PLGA/MgO/Quercetin was prepared by electrospinning. PLGA/MgO/Quercetin membranes were shown to have a highly porous surface and microstructure, as observed by scanning electron microscopy. Along with excellent biocompatibility, PLGA/MgO/Quercetin membranes promoted cell proliferation and migration, as well as osteogenic differentiation of BMSCs (Bone marrow mesenchymal stem cells) in a dose-dependent manner through the activation of Wnt/β-Catenin pathway. The PLGA/MgO/Quercetin membranes, with an appropriate concentration of quercetin (<1 wt%), promoted EPCs (Endothelial progenitor cells) angiogenesis. In a subcutaneous implantation model and rat skull defect model, optimal osteogenesis and angiogenesis function were observed for the PLGA/20 wt% MgO/0.1 wt% Quercetin membrane. In conclusion, PLGA/MgO membranes, with an appropriate concentration of quercetin, show a variety of biological activities and are promising materials for the generation of artificial periosteum.
研究领域:
生物医学工程
·
组织工程
·
骨科
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Han Sun,Yixuan Shang,Junxia Guo,Abudureheman Maihemuti,Siyu Shen,Yong Shi,Hao Liu,Junyi Che,Qing Jiang
Massive periosteal defects often significantly impair bone regeneration and repair, which have become a major clinical challenge. Unfortunately, current engineered periosteal materials can hardly currently focus on achieving high tissue adhesion property, being suitable for cell growth, and inducing cell orientation concurrently to meet the properties of nature periosteum. Additionally, the preparation of oriented surface nanotopography often relies on professional equipment. In this study, inspired by the oriented collagen structure of nature periosteum, we present a composite artificial periosteum with a layer of oriented nanotopography surface containing carbon nanotubes (CNTs), cross-linked with adhesive polydopamine (PDA) hydrogel on both terminals. An oriented surface structure that can simulate the oriented alignment of periosteal collagen fibers can be quickly and conveniently obtained via a simple stretching of the membrane in a water bath. With the help of CNTs, our artificial periosteum exhibits sufficient mechanical strength and desired oriented nanotopological structure surface, which further induces the directional arrangement of human bone marrow mesenchymal stem cells (hBMSCs) on the membrane. These oriented hBMSCs express significantly higher levels of osteogenic genes and proteins, while the resultant composite periosteum can be stably immobilized in vivo in the rat model of massive calvarial defect through the PDA hydrogel, which finally shows promising bone regeneration ability. We anticipate that the developed functional artificial periosteum has great potential in biomedical applications for the treatment of composite defects of the bone and periosteum.
研究领域:
生物材料
·
组织工程
·
再生医学
·
纳米技术
·
生物医学工程
✓ 已验证
DOI
PubMed
高影响因子
Bio-Design and Manufacturing
·
2022
·Vol. 5
·期 3
·540-555
·
IF 5.887
Sun Yage,Gao Ziwei,Zhang Xiaoping,Xu Ziyang,Zhang Yahan,He Binbin,Yang Rong,Zhang Qian,Yang Qiang,Liu Wenguang
Periosteum, a membrane covering the surface of the bone, plays an essential role in maintaining the function of bone tissue—and especially in providing nourishment and vascularization during the bone regeneration process. Currently, most artificial periostea have relatively weak mechanical strength and a rapid degradation rate, and they lack integrated angiogenesis and osteogenesis functions. In this study, a bi-layer, biomimetic, artificial periosteum composed of a methacrylated gelatin–nano-hydroxyapatite (GelMA-nHA) cambium layer and a poly (N-acryloyl 2-lycine) (PACG) -GelMA-Mg 2+ fibrous layer was fabricated via 3D printing. The GelMA-nHA layer is shown to undertake the function of improving osteogenic differentiation of rat bone marrow mesenchymal stem cells with the sustainable release of Ca 2+ from nHA nanoparticles. The hydrogen-bonding-strengthened P(ACG-GelMA-L)-Mg 2+ hydrogel layer serves to protect the inner defect site and prolong degradation time (60 days) to match new bone regeneration. Furthermore, the released magnesium ion exhibits a prominent effect in regulating the polarization phenotype of macrophage cells into the M2 phenotype and thus promotes the angiogenesis of the human umbilical vein endothelial cells in vitro. This bi-layer artificial periosteum was implanted into a critical-sized cranial bone defect in rats, and the 12-week post-operative outcomes demonstrate optimal new bone regeneration. Graphic abstract
研究领域:
生物医学工程
·
组织工程
·
生物材料
·
再生医学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）