CERAMICS INTERNATIONAL
·
2024
·Vol. 51
·期 12
·16749-16757
·
IF 5.1
Yihan Liu,Yingjie Mao,Zhichao Zhang,Kai Liu,Denghui Xu,Jun Zhou
Lead-free double perovskites (DPs), characterized by their low toxicity, broad emission spectra and excellent stability, have emerged as highly promising doped hosts with significant potential for visible light applications. However, achieving rich and distinctive multiple photoluminescent (PL) emission through doping with various lanthanide (Ln 3+ ) ions remains a formidable challenge. In this work, we explored the luminescent properties of Cs 2 KInCl 6 , which exhibits intrinsic broad self-trapped excitons (STEs) emission centered at 500 nm. By doping Ln 3+ ions (Dy 3+ , Sm 3+ , and Tb 3+ ) into Cs 2 KInCl 6 , multiple emission could be realized, along with energy transfer (ET) from the intrinsic STEs to Tb 3+ and Sm 3+ ions. Notably, the incorporation of Tb 3+ ions enhanced exciton-phonon coupling and lattice vibrations , resulting in strengthened STEs emission. Furthermore, tunable emission from green to yellow was achieved through multiple ET processes in Cs 2 KInCl 6 :Tb 3+ ,Sm 3+ by co-doping Tb 3+ and Sm 3+ . This work not only offers new insights into enhancing STEs emission in DPs, but also imparts Cs 2 KInCl 6 with tunable PL properties, which makes it a promising candidate for multicolor light-emitting devices.
研究领域:
材料科学
·
光物理学
·
无机化学
·
发光材料
·
半导体材料
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2024
·
IF 6.3
Yaoliang Huang,Yunru Zhang,Guizhi Yuan,Dingshan Ruan,Xinlong Zhang,Weijian Liu,Zhongshuai Zhang,Xiaoyuan Yu
Ni/Mn-based layered oxides have been widely studied for sodium ion battery cathode because of high capacity and simple preparation. However, its application has been restricted owing to unstable structure and poor cycling performance. Herein, the multi-element doped hexagonal sheet Ni/Mn-based layered oxide with ZrO 2 surface modification O3-NaNi 0.3 Mn 0.5-x Fe 0.1 Cu 0.1 Zr x O 2 @ZrO 2 (NFMCZ-x) cathode materials have been successfully synthesize by high temperature calcination method accompanied by ball milling activation. XRD refinement results show Zr 4+ substitution of Mn 3+ can increase interlayer distance of sodium layer. Benefiting from the synergetic effect of multi-element doping and ZrO 2 surface modification, the optimized NFMCZ-0.03 sample exhibits a higher discharge capacity of 178 mAh/g at 0.1C and good capacity retention (77 % after 50 cycles at 2C). Furthermore, NFMCZ-0.03 has an excellent air stability with a capacity retention rate of 86 % during 50 cycles at 1C after being exposed in the air for 20 days. The ex-situ XRD results of NMFC at different charge/discharge voltages show Zr 4+ doping can suppress O3 + P3′'–O3′-O3 + P3′' phase transition during charge/discharge process. These results confirm that synergistic effect of multi-doping combined with surface modification can improve electrochemical performance of layered oxides cathodes, which provides a research idea for development of Ni/Mn-based layered oxides cathodes for sodium-ion batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
无机化学
·
固态化学
✓ 已验证
DOI
高影响因子
BIOMASS & BIOENERGY
·
2022
·
IF 5.774
Jie Zhang,Danyang Cao,Shanshan Wang,Xin Feng,Jiahua Zhu,Xiaohua Lu,Liwen Mu
In this study, heteroelement-rich groups (N and B elements, tris (2-hydrazinylethyl) borate) were successfully synthesised on lignin by microwave amination. The reaction between lignin and heteroelement-rich groups was confirmed using several characterization techniques, including fourier transform infrared (FT-IR) spectroscopy, thermogravimetric (TG) analysis, and X-ray photoelectron spectroscopy (XPS). A lignin model compound (2-phenoxyacetophenone (L-M)) was used to study the bond-breaking mechanism of lignin depolymerization , and the amine group, which acted as a nucleophile , attacked the C–C bond to form an amide bond with the lignin. As an effective additive, modified lignin can increase the viscosity of poly (ethylene glycol) 200 (PEG200), reducing the wear volume and friction coefficient in the friction test. Theoretical calculations showed that the polarity of the modified lignin increased, which allowed the modified lignin to form a strong physical adsorption on the metal surface. In addition, the reciprocal hydrogen bonding between the modified lignin and PEG200 contributes synergistically to the enhanced lubrication film strength , and thus, the better tribological properties of these new lubricants.
研究领域:
高分子化学
·
材料科学
·
绿色化学
·
表面工程
·
能源材料
·
可持续技术
✓ 已验证
DOI
高影响因子
Advanced Optical Materials
·
2021
·Vol. 10
·期 3
·2101843
·
IF 9.926
Ziyu Chen,Jiaxin Yang,Rui Xu,Zejia Zhao,Xu Sang,Lisa Liu,Ming Feng,Feng Song,Yonghong He,Wei Huang
Optical encryption provides a significant implementation strategy for information security, which can be ascribed to multichannel, simple operation, and high security. Multiple responsive luminescent material has emerged as an ideal candidate for optical encryption, owing to intelligent responsive ability and unclonable security. Herein, a structural doping strategy is developed in the layer-by-layer self-assembly process to elevate the maneuverability of light-emitting color and mode. By encapsulating lanthanide doped inorganic matrix and layered hydroxide with PMA, the recognizable red-orange fluorescence can be produced in the invisible region, and realizes the conversion of yellow and green fluorescence in visible region. Meanwhile, both excitation source and emission color can be used as distinguishable encryption means, which enables structural doping complex to be multiplexed and encoded with high capacity and complexity. Furthermore, asymmetrically and symmetrically coded flexible labels with specific color sequence are prepared by brushing process, and specific encryption key are set to ensure the nonlinearity of cryptosystem. Through the integration of dual-mode and adjustable light response codes constructed by structural doping strategy, multidimensional high-level information encryption can be realized, which opens up a deep exploration in the field of information security for the application of multifunctional optical properties of light response materials.
研究领域:
材料科学
·
纳米科技
·
光学工程
·
信息安全
·
功能材料
·
光子学
·
智能材料
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Haisheng Chen,Wenwen Chen,Jiaying Shen,Xiaona Du,Tianhong Zhou,Zhengang Dong,Taiyu Bian,Jiaxing Guo,Yiyang Wen,Yuanlin Liang,Zhenping Wu,Yang Zhang
Developing smart luminescent materials with desirable and tunable characteristics has always been an overriding priority of fluorescence technology. However, huge challenges encompass the single functionality of the luminescent materials and the traditional chemical synthetic techniques with rigorously controlling over the miscellaneous experimental conditions and variables. Herein, the lanthanide-doped bismuth-layered ferroelectric (Na 0.5 Bi 0.5 ) 0.96 Er 0.04 Bi 2 Nb 2 O 9.02 has been prepared to be utilized as a platform that not only serves the in-situ and reversible tailoring of the upconverted emission via physical methods, but also enable the versatile functionalities such as photomemory and multi-modal temperature sensing. High luminescent contrast that can reach up to 83.7 % before and after the 405 nm irradiation has been realized on the basis of the photochromic phenomenon of the as-prepared (Na 0.5 Bi 0.5 ) 0.96 Er 0.04 Bi 2 Nb 2 O 9.02 sample, and the fundamental application in the photomemory has been exhibited. Moreover, the performances of triple-mode thermometry built on the fluorescent intensity ratio techniques ( 2 H 11/2 / 4 S 3/2 and 4 S 3/2 / 4 F 9/2 ) as well as the lifetime of the 4 S 3/2 excited state of the Er 3+ ion have been investigated in carefulness, with the maximal relative sensitivities of 1.22 % K −1 at 300 K, 0.92 % K −1 at 510 K, and 0.18 % K −1 at 450 K, respectively. Our results provide significant insights into the methodology of physically modulating the upconversion luminescence, and offer a glamorous pathway for multifunctional high-end applications.
研究领域:
材料科学
·
光学工程
·
功能材料
·
纳米光子学
·
传感技术
·
固态物理
·
智能材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）