MATERIALS & DESIGN
·
2017
·
IF 4.364
Puhong Wen,Lili Ai,Taotao Liu,Dengwei Hu,Fangyi Yao
The regular orthorhombic Nb 2 O 5 (O-Nb 2 O 5 ) rectangle nanosheets dominantly exposed (010) facet are synthesized by a hydrothermal topological reaction with a precursor of K 4 Nb 6 O 17 ·4.5H 2 O (KNbO). The structure and morphology of the samples obtained at different temperatures and pH values of reacting solution are investigated. The results suggest that there are two topological reactions in this process. One is the acid-exchanging reaction transforming into H 4 Nb 6 O 17 ·3H 2 O (HNbO) nanosheets from KNbO rectangle nanosheets , and the other is dehydration reaction transforming into O-Nb 2 O 5 rectangle nanosheets from HNbO nanosheets. And the {010} facets of O-Nb 2 O 5 crystal are transformed from the {010} facets of HNbO crystal in the ingenious topological reaction. The photoelectric performance of the obtained O-Nb 2 O 5 nanosheets is evaluated by decomposing water to H 2 under 370 nm UV light illumination and measuring the accompanying photocurrent . The photocurrent density is 680 nA·cm − 2 generated by splitting water with O-Nb 2 O 5 nanosheets as photocatalyst , and it is 4.3 times of the contrast sample. The result indicates that the (010) facet of O-Nb 2 O 5 is one of the highest photocatalytic active surfaces and shows high photoelectric conversion efficiency. Thus, the O-Nb 2 O 5 nanosheets dominantly exposed (010) facet have potential applications in photocatalyst and photoelectric nanodevices .
研究领域:
材料科学
·
光催化
·
纳米材料
·
无机化学
·
能源材料
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2017
·
IF 3.387
Hui Chen,Jinfeng Wang,Chenchen Jia,Junpeng Mou,Lei Zhu
For the purpose of increasing the power conversion efficiency (PCE) meanwhile decreasing the cost of dye-sensitized solar cell (DSSC), Cu 2 ZnSnS 4 - multiwall carbon nanotubes (CZTS-MWCNTs) nanohybrid Pt-free counter electrode (CE) was prepared via a facile fabricating route. In brief, CZTS nanoparticles were synthesized by a solvothermal method and the composite film was fabricated by spin coating the aqueous solution of the composite. The short-circuit current density and PCE of the DSSC with CZTS-MWCNTs CE were found to be 16.62 mA cm −2 and 9.04%, respectively. But the corresponding values were 15.42 mA cm −2 and 8.74% for a DSSC with a pure Pt-CE. This is owing to the synergistic effect of the intrinsic superior electrocatalytic activity of the CZTS nanoparticles and highly specific surface area and high electrical conductivity of the MWCNTs . The presence and distribution of CZTS-MWCNTs on the CE were characterized by X-Ray Diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM), respectively. Cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) were examined for confirming the high electrocatalytic efficiency of this nanohybrid system.
研究领域:
材料科学
·
能源化学
·
纳米技术
·
电化学
·
光伏器件
✓ 已验证
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 63
·39523-39529
·
IF 3.108
Wenhui Zhang,Yang Ding,Yue Jiang,MingZhi Zheng,Sujuan Wu,Xubing Lu,Min Zeng,Xingsen Gao,Qianming Wang,Guofu Zhou,Jun-ming Liu,Krzysztof Kempa,Jinwei Gao
Interface engineering has been proved to be a practical strategy to enhance power conversion efficiency (PCE) and stability of perovskite solar cells. Recently approaches involving ultra-thin layer deposition and vacuum-processing, while improving PCE, increase the processing complexity, and thus the overall cost. In this paper, we demonstrate a high-efficiency inverted planar perovskite solar cell, obtained with a simple wet-chemistry based, room-temperature, and cost-effective process, which synthesizes two interfacial layers: solution processed molybdenum oxide (named s-MoOx) for anode and titanium(IV) oxide bis(2,4-pentanedionate) (TOPD) for cathode buffer layers. Steady-state photoluminescence (PL), time resolved photoluminescence (TRPL) and electrochemical impedance spectroscopy (EIS) are conducted to characterize the charge transport properties, confirming an enhanced charge extraction efficiency and a suppressed charge recombination. In addition, the introduction of the interfacial layers facilities formation of an ohmic contact with the metal electrode, reducing the charge transfer resistance and increasing the FF to as high as 80.7%. The optimized solar cells achieve the best PCE of 16.04% which far exceeds the PCE of devices without these interfacial layers (PCE = 11.2%).
研究领域:
材料科学
·
能源科学
·
纳米技术
·
表面与界面化学
✓ 已验证
DOI
高影响因子
Journal of Energy Chemistry
·
2017
·Vol. 27
·期 2
·413-418
·
IF 2.594
Yanyun Zhang,Xichuan Yang,Weihan Wang,Xiuna Wang,Licheng Sun
X1 (MeO-TPD) is an inexpensive and easily synthesized π -conjugated molecule that has been used as a hole-transport material (HTM) in solid-state dye-sensitized solar cells (ssDSSCs), achieving relatively high efficiency. In this paper, we characterize the physicochemical properties of 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) and show that it is a promising p-dopant in a spin-coating solution with X1 as the HTM. The doped ssDSSCs showed an increase in short-circuit current density from 5.38 mA cm –2 to 7.39 mA cm –2 , and their overall power conversion efficiency increased from 2.9% to 4.3%. Also, ssDSSCs with DDQ-doped X1 were more stable than the undoped samples, demonstrating that DDQ can act as a p-type dopant in X1 as an HTM for highly efficient, stable ssDSSCs.
研究领域:
材料科学
·
能源化学
·
光伏技术
·
纳米材料
·
半导体器件
·
表面化学
·
电化学
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Chenxi Zhang,Xueshuang Deng,Jianfeng Zheng,Xin Zhou,Jianhua Shi,Xiaohong Chen,Zhuo Sun,Sumei Huang
We report a simple and low-cost approach to enhance the longstanding stability of the perovskite solar cell (PSC) through the application of low-temperature grown SnO 2 nanorod (NR) arrays. SnO 2 NR arrays were fabricated by an aqueous synthesis method in the presence of hydrochloric acid and using thin compact SnO 2 as seeds. The influence of HCl concentration on the photovoltaic (PV) performance of the SnO 2 NR array based PSC device was investigated. The formed crystalline SnO 2 nanorods with square transversal-sections were oriented on the FTO facets in a well-defined and perpendicular fashion at an optimal HCl concentration. The optimized width and length for SnO 2 nanorods were 30 nm and 150 nm, respectively. Consequently, efficient and stable SnO 2 nanorod based perovskite devices were obtained with an average power conversion efficiency (PCE) of 16.57%. The SnO 2 nanorod array based PSCs demonstrated considerably better ultraviolet (UV) and ambient air stability than the planar SnO 2 and notably mesoporous TiO 2 solar cells. This paper provides a prospective scheme to grow high-quality three-dimensional SnO 2 nanorod arrays for highly stable and efficient PSCs.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
光伏技术
·
半导体器件
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2017
·
IF 3.133
Jianguang Jia,Chunmei Liu,Yuan Lin,Xiaowen Zhou
Charge recombination is an important factor that limits the cell efficiency of quantum dot sensitized solar cells (QDSSCs). Herein, we report a facile way to improve the cell performance of CdSe sensitized ZnO QDSSC by overcoating a thin layer of ZnSe on CdSe/ZnO film through a successive ionic layer adsorption and reaction (SILAR) procedure. Photovoltaic investigations indicate that ZnSe overcoating can increase photocurrent and photovoltage of the cell, resulting in significant enhancement of the cell efficiency, which is much better than the widely used traditional ZnS material. The superior role of ZnSe overcoating is ascribed to its large inhibition of charge recombination loss owing to its suitable band structure, efficient passivation of ZnO and CdSe QDs as well as its small lattice mismatch with CdSe that leads to the large decrease of surface/interface defects in CdSe/ZnO photoanode . This finding provides an alternative efficient way to enhance the cell performance of ZnO based QDSSC by suppressing the charge recombination.
研究领域:
材料科学
·
纳米科技
·
能源化学
·
半导体物理
·
光伏技术
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2016
·
IF 3.15
Xi-Ming Song,Xin Zhou,Chunxue Yuan,Yu Zhang,Qiang Tong,Ying Li,Luxia Cui,Daliang Liu,Wei Zhang
We reported a novel Fe 2 O 3 /rutile TiO 2 nanorod (NR) arrays with the heterogeneous structure for photoelectrochemical (PEC) cells, which were fabricated on fluorine-doped tin oxide glass (FTO) substrates that serve as model architecture via a hydrothermal method. Fe 2 O 3 was revealed as an inexpensive and eco-friendly semiconductor sensitizer to make TiO 2 respond to visible light . By using this photoanode, the photoelectric conversion and water splitting properties of PEC cells based on the one-dimensional (1D) Fe 2 O 3 /TiO 2 heterostructures were investigated in detail under simulated sunlight. Meanwhile, the optimization of photovoltaic performance was also achieved by regulating the amount of Fe 2 O 3 . The open circuit voltage and short circuit current of the Fe 2 O 3 /TiO 2 solar cell can reach 0.435 V and 1.840 mA/cm 2 , respectively. In addition, theoretical analysis of the photoelectric effect is preliminarily explored on the basis of the flat band potential results.
研究领域:
材料科学
·
物理化学
·
能源科学
·
纳米科技
·
光催化
✓ 已验证
DOI
高影响因子
ORGANIC ELECTRONICS
·
2019
·
IF 3.495
Xin Qi,Ganghong Liu,Duo Wang,Ning Zhu,Yuqing Zhang,Zehao Zhang,Cuncun Wu,Xiangdong Li,Wei Luo,Yingqiang Li,Haozhe Hu,Zhijian Chen,Lixin Xiao,Shufeng Wang,Bo Qu
Interfacial modification as a feasible strategy to improve the properties of perovskite solar cells (PSCs) has been widely studied in recent years. In this work, PbCl 2 modification at the interface of SnO 2 /CH 3 NH 3 PbI 3 was used for CH 3 NH 3 PbI 3 -based planar PSCs. The introduction of PbCl 2 between SnO 2 and CH 3 NH 3 PbI 3 layers boosted the crystallization of perovskite film, which promoted the photovoltaic properties of corresponding PSCs. The open circuit voltage ( V OC ) and fill factor (FF) of the PbCl 2 -modified devices (1 mg/mL) were 1.11 V and 0.79, respectively, which were both higher than those of the reference devices without PbCl 2 (1.04 V and 0.76). Moreover, a steady-state power output efficiency exceeding 19% was obtained for the PbCl 2 -modified devices (1 mg/mL), which implied that PbCl 2 modification was an effective and low cost strategy for efficient PSCs.
研究领域:
材料科学
·
光伏技术
·
纳米科技
·
表面与界面工程
·
能源材料
·
半导体器件
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2016
·
IF 6.333
Yanchun Yang,Xiaojiao Kang,Lijian Huang,Song Wei,Daocheng Pan
Earth abundant Cu 2 ZnSn(S,Se) 4 (CZTSSe) has been considered as one of the most promising thin film solar cell absorber candidates. Here, we develop a facile water-based precursor solution approach for depositing high-efficiency Cu 2 ZnSn(S,Se) 4 thin film solar cells. In this environmentally friendly approach, inexpensive elemental Cu, Zn, Sn and S powders are used as the starting materials and are dissolved in the aqueous solution of thioglycolic acid and methylamine, forming a homogeneous precursor solution for depositing Cu 2 ZnSnS 4 nanocrystal thin film . As-deposited CZTS nanocrystal thin films are selenized to form the large-grain CZTSSe absorber layers . It was found that Na doping plays an important role in the formation of the extremely dense and flat CZTSSe absorber layer, and fill factor can be significantly improved for Na-doped CZTSSe solar cells, which lead to a photoelectric conversion efficiency of 6.96% with an open-circuit voltage of 378 mV, a short current density of 28.17 mA cm −2 , and a fill factor of 65.4%.
研究领域:
材料科学
·
新能源材料
·
半导体薄膜
·
光伏技术
·
无机功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2018
·
IF 5.091
Shuai Ma,Lifeng Dong,Hongzhou Dong,Jie Wang,Yingjie Chen,Beili Pang,Jianguang Feng,Liyan Yu,Mei Zhao
We concretely report feasible synthesis procedures of colloidal Cu 2 ZnSn(S 1- x ,Se x ) 4 -Au (CZTSSe-Au) nano-heterostructured composites, and creatively employ them as the counter electrodes (CEs) of all-solid-state solar cells with inorganic CsSnI 2.95 F 0.05 perovskite hole conductor. Acquired optical characterization indicates that integration of noble metal nanoparticles with cuprum-chalcogenide could heighten light absorption within visible-band due to localized surface plasmon resonance (LSPR) generated by Au, and the forbidden gap of nanocomposites gets adjustment accordingly. It is demonstrated that this novel photocathode alternative with favorable conductivity can not only match the energy level within the device band structure construction, but also restrain recombination so that accelerate charge transfer and extraction occurring on the photocathode. The photocurrent and photoelectric conversion efficiency (PCE) of cells conjugating CZTS-Au photocathodes turn to be respectively 43% and 25% higher than those using pure CZTS. Moreover, it has been demonstrated that CZTS-Au, coupling very well with inorganic perovskite, owns comparable electrocatalytic performance and even higher output photocurrent with respect to platinum CEs, which portends a potential substitution for conventional costly photocathodes. A comprehensive analysis on impedance spectroscopy data is subsequently carried out for the sake of deep understanding charge accumulation and transfer response at CsSnI 2.95 F 0.05 /CE interface, attempting to orient further optimization of device performance.
研究领域:
材料科学
·
能源科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2018
·Vol. 6
·期 46
·23773-23779
·
IF 9.931
Zhiyuan Wang,Ruqin Zhang,Min Zhao,Zhongqiang Wang,Bingwei Wei,Xuefeng Zhang,Shuai Feng,Hailiang Cao,Peizhi Liu,Yuying Hao,Hua Wang,Bingshe Xu,Stephen J. Pennycook,Junjie Guo
High-performance organic photovoltaics (OPVs) are of great scientific and technological importance due to their potential large-scale industrial applications. Introducing semiconductor quantum dots has been proven to be an effective way to improve the power conversion efficiency (PCE) of OPVs. In this paper, we report a novel approach to fabricate atomically thin antimonene quantum sheets (AMQSs) possessing a uniform size (≈2.2 nm) via imidazolium ionic liquid-assisted exfoliation. In this method, the yield of AMQSs (1.1 mg mL−1) has been increased by nearly two orders of magnitude compared with that of previously reported methods. Furthermore, upon adding AMQSs into the light absorber in OPVs, the optimal device with 1.0 mg mL−1 AMQSs shows the highest PCE of 9.75%, resulting in over 25% enhancement in PCE compared to that of the reference device. It also leads to a noticeable enhancement in the short-circuit current density (Jsc) of 16.7% and the fill factor (FF) of 8.4%. The increased PCE is mainly due to the two-dimensional electronic structure of AMQSs that can enhance the light absorption, assist exciton dissociation and reduce charge recombination of OPVs. This work provides a new avenue toward mass production of two-dimensional quantum sheets and points to a new strategy for highly efficient OPVs.
研究领域:
材料科学
·
纳米科技
·
光伏技术
·
半导体物理
·
能源材料
✓ 已验证
DOI
高影响因子
OPTICAL MATERIALS
·
2022
·
IF 3.754
Ziang Xie,Ping Wu,Sen Chen,Shiping Zhang,Yili Pei,Li Li,Guodong Fu,Ying Xie,Haochen Guan,Yun Xing,Jianzhang Zhu,Xinran Wang
The power conversion efficiency (PCE) of tin-based perovskite solar cells (TPSCs) was significantly improved when polyvinyl pyrrolidone (PVP) was doped into the formamidinium tin iodide (FASnI 3 ) layer with an optimized doping mass. After doping, the FASnI 3 grain size, film smoothness and average carrier lifetime were largely enhanced, which demonstrate the crystallization quality improvement to FASnI 3 . The champion PCE of the enhanced TPSC was improved to 7.83%, which is relatively 27% larger than that of the control, 6.15%. After continuous storage for 15 days, the PCE of the enhanced TPSC remained 74.4% of its original value. Using the finite difference time domain (FDTD) simulation method, we demonstrated that the light absorption ratio of the FASnI 3 :PVP layer was larger than that of the FASnI 3 , and the photo-generated carrier density of the enhanced TPSC was approximately 2% ∼ 3% larger than that of the control. The ultimate efficiency of the enhanced TPSC was calculated to be 26.23%. It is potential to dope PVP into FASnI 3 to further enhance the device performance of TPSCs.
研究领域:
材料科学
·
光伏技术
·
纳米科技
·
表面化学
·
半导体器件
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）