In this paper, explain a new relationships between Bi 3+ content, the phase crystal, microstructure and conductivity for Sm and Bi co-doped Ce 0.8− x Sm 0.2 Bi x O 1.9−1/2 x ( x = 0, 0.05, 0.1, 0.15, 0.2) electrolytes prepared by co-precipitation method. The XRD patterns showed that this compounds exhibit a fluorite-type cubic structure after the samples calcined at 700 °C for 4 h and the cell volumes of increased when the Bi content increased. In addition, for the samples sintered at 1400 °C for 4 h, the Bi doping improves the relative density, the grain size and the average thermal expansion coefficient (TEC). More in details, the relative density and TEC increase with the Bi content. Form the AC impedance spectroscopy measurements, the conductivity of the sintered samples is found to improve with the increasing of Bi content (for x ≤ 0.15), which is ascribed to the increasing of the number of oxygen ion vacancies and the increase in the unit cell volume. However, the conductivity decreases when the Bi content is further increased (0.15 < x ≤ 0.2), which is ascribed the reduction of the number of free oxygen vacancies. The highest conductivity at 800 °C is 5.6 × 10 −2 S/cm and the activation energy is 0.83 eV for Ce 0.65 Sm 0.2 Bi 0.15 O 1.825 , indicating that this would be a promising electrolyte for the intermediate temperature-solid oxide fuel cell applications.
Xu Y.,Hu Y.,Bao Q.,Zhang J.,Liu B.,Zhang Z.,Zhang Q.,Zhang H.
Copper phyllosilicate has been synthesized from a solution of sodium silicate and copper nitrate by co-precipitation under acidic conditions followed by reduction under H 2 flow for using it as the Cu/SiO 2 catalyst. The catalyst has been characterized by XRD, XPS, FTIR and Raman spectra, EDS, BET, and TEM. It is confirmed that only copper phyllosilicate and SiO 2 exist in the catalyst precursor, and there has been no CuO. Physical and chemical properties of Cu/SiO 2 catalyst have been evaluated. The Cu/SiO 2 catalyst has not only a large specific surface area and abundant mesopores but also the advantages of high dispersion of copper nanoparticles and the combination of Cu 0 and Cu + . The catalyst demonstrates high activity and selectivity in the reaction of 2-butanol dehydrogenation to methyl ethyl ketone.
危险品化学品经营许可证（带存储）