TiO2is one of the most attractive semiconductors for use as a photoanode for photoelectrochemical (PEC) water oxidation. However, the large-scale application of TiO2photoanodes is restricted due to a short hole diffusion length and low electron mobility, which can be addressed by metal doping and surface decorating. In this paper we report the successful synthesis of hierarchical Ta doped TiO2nanorod arrays, with nanoparticles on the top (Ta:TiO2), on F-doped tin oxide (FTO) glass by a hydrothermal method, and its application as photoanodes for photoelectrochemical water oxidation. It has been found that the incorporation of Ta5+in the TiO2lattice can decrease the diameter of surface TiO2nanoparticles. Ta:TiO2-140, obtained with a moderate Ta concentration, yields a photocurrent of ∼1.36 mA cm−2at 1.23 V vs. a reversible hydrogen electrode (RHE) under FTO side illumination. The large photocurrent is attributed to the large interface area of the surface TiO2nanoparticles and the good electron conductivity due to Ta doping. Besides, the electron trap-free model illustrates that Ta:TiO2affords higher transport speed and lower electron resistance when under FTO side illumination.Keywords:hierarchical TiO2;Ta doping;charge separation;photoelectrochemical water oxidation
Water-induced degradation threatens sandstone cultural relics, highlighting the need for effective protection. This study applies a nano-coating of PFDTS-modified TiO 2 /SiO 2 to sandstone, optimizing PFDTS concentration, coating penetration depth, and hydrophobicity. A TiO 2 -to-SiO 2 ratio of 75:25 with 80 μL of PFDTS achieved high water and oil contact angles of 152.7° and 145.7°, respectively. After 210 h of UV exposure, contact angles showed minimal reduction, confirming the coating's durability. Additionally, air permeability is preserved to maintain sandstone breathability. These findings provide valuable insights for safeguarding sandstone heritage sites against weathering.