COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2016
·
IF 2.76
Hao Li,Sirong Yu,Xiangxiang Han,Yan Zhao
Superhydrophobic surface has attracted great attention because of its potential applications. In this work, a facile method for fabrication of a superhydrophobic coating on pipeline steel surface is reported. A hierarchical structured coating with nanoflakes was fabricated via electrodeposition and solution-immersion, and then the coating achieved superhydrophobic with water contact angle about 157° and sliding angle around 3° after fluorination modification. The surface morphology and wettability changed with different experimental parameters were also investigated. The prepared superhydrophobic coating exhibited efficient self-cleaning and anticorrosion properties. Furthermore, the anti-scaling property of this superhydrophobic coating was confirmed since the CaCO 3 crystals on the superhydrophobic coating were mainly needlelike compared to the rhombohedral CaCO 3 crystals on the surface of steel substrate. This superhydrophobic coating maintained good long-term stability in air, and mechanical and thermal stability under certain environment. This superhydrophobic coating provided potential multifunctional applications, such as self-cleaning, corrosion resistance and anti-scaling properties, of deposition metal or alloy coating.
研究领域:
材料科学
·
表面工程
·
腐蚀科学
·
功能涂层
·
金属防护
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2016
·Vol. 41
·期 22
·9611-9618
·
IF 3.205
Jinhua Xiao,Wenying Zhang,Chunyan Xiong,Bo Chi,Jian Pu,Li Jian
Spinel oxides with the general formula of MnCu x Co 2−x O 4 (x = 0.1, 0.3, 0.5, 0.7 respectively) are used as coating materials on the metallic interconnect SUS 430 alloy to reduce the cathodic performance degradation by Cr poisoning and the interfacial resistance to improve the surface stability. The effect of Cu doping at the B position of spinel on the electrical conductivity and coefficient of temperature expansion (CTE) is investigated to determine the oxidation behavior and effectiveness as a protective layer. The result confirms that MnCu 0.5 Co 1.5 O 4 spinel shows highest electrical conductivity of 105.46 S cm −1 at 750 °C in air and an average CTE value of 12.27 × 10 −6 K −1 at temperature range of 20–960 °C. MnCu 0.5 Co 1.5 O 4 coating is stable enough after 2000 h cyclic oxidation at 750 °C. The growth of Cr 2 O 3 and formation of MnCr 2 O 4 in the scale layer are effectively suppressed by the presence of MnCu 0.5 Co 1.5 O 4 coating. The oxidation kinetics obeys the parabolic law with a rate constant as low as 2.76 × 10 −15 g 2 cm −4 ·s −1 and the ASR contributed by the oxide scale is 8.04 mΩ cm 2 at 750 °C. The research indicates that MnCu 0.5 Co 1.5 O 4 is a promising coating material for metallic interconnects of the intermediate temperature solid oxide fuel cells .
研究领域:
材料科学
·
能源材料
·
固体氧化物燃料电池
·
表面工程
·
电化学
·
高温腐蚀
·
功能涂层
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2014
·Vol. 26
·期 2
·884-890
·
IF 1.966
Li Rui,Wang Yan-ze,Mao Zhi-yong,Wang Da-Jian
A remote phosphor coating by using Sr 3 (Al,Si)(O, F) 5 :Ce 3+ (SASF:Ce 3+ ) on glass substrate was prepared by a simple and convenient screen printing method. The crystalline phase and the distribution of SASF:Ce 3+ crystals in coating were investigated by XRD and SEM, respectively. The scattering light and absorption light properties of remote phosphor coating with different thicknesses were discussed through Lambert–Beer’s law. The relationship between luminous efficiency and absorption coefficient was demonstrated. White light emitting diode prototype fabricated with blue chip and the prepared patterned SASF:Ce 3+ remote phosphor in this work showed excellent performances, opening a cost-effective process to generate planar white light.
研究领域:
材料科学
·
光学工程
·
发光材料
·
固态照明
·
功能涂层
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Jiemin Han,Yifei Ma,Mei Wang,Zhaomin Tong,Jonghwan Suhr,Liantuan Xiao,Suotang Jia,Xuyuan Chen
Black coatings benefit from low reflectance or high light absorption are utilized in multifarious optical applications. Due to their unique three-dimensional nanostructure and π-band optical transitions, vertical graphene (VG) has drawn great attention to the field of black coatings. However, how the morphology of VGs affects reflectance has not been comprehensively disclosed yet. In addition, the morphology of the substrate for VG growth also affects the absorption properties. Here, we report a nano-and micro-engineered VG/Ni structure based on VG and laser-modified nickel foil, which possesses omnidirectional low reflectance of ∼0.25% over the visible range. A larger spacing of graphene nanowalls is more conducive to the formation of light traps and improves the absorption property. Besides, the surface of nickel substrate by laser irradiation presents a “cauliflower-like” microstructure, which further enhances light-trapping ability.
研究领域:
材料科学
·
光学工程
·
纳米技术
·
表面工程
·
功能涂层
✓ 已验证
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2017
·Vol. 24
·期 4
·59
·
IF 1.615
Yuan Ruixia,Wu Shiqi,Wang Huaiyuan,Hu Lin,Zhu Yanji,Gao Simeng,Zhu Yixing,Zhang Xiguang
In this paper, a novel multifunctional superamphiphobic coating for anticorrosion was successfully prepared on aluminum substrate via a simple spraying technique. Al 2 O 3 nanoparticles were chemically grafted onto montmorillonite (MMT) nanosheets via coupling effect of NH 2 -C 3 H 6 -Si(OC 2 H 5 ) 3 (KH-550) and then modified by low surface energy material polydimethylsiloxane (PDMS). The ethylene tetrafluoroethylene (ETFE) composite coating with 25 wt% MMT/Al 2 O 3 -PDMS binary nanocomposite exhibited well-designed nano/μ structures and possessed superamphiphobicity with high contact angles towards water (164°), glycerol (158°) and ethylene glycol (155°). This coating demonstrated outstanding self-cleaning ability and strong adhesive ability (Grade 1 according to the GB/T 9286). The superhydrophobicity could be maintained after 8000 times abrasion or annealing treatment for 2 h under 350 °C. The coating still retained high water-repellence after immersion in 1 mol/L HCl (146°), 1 mol/L NaOH (144°) and 3.5 wt% NaCl (151°) solutions for 30 d. It should be noted that this superamphiphobic coating revealed excellent long-term corrosion protection with extremely low corrosion rate (4.3 × 10 −3 μm/year) and high protection performance (99.999%) after 30 d immersion in 3.5 wt% NaCl solutions based on electrochemical corrosion measurements. It is believed that such integrated functional coating could pave new way for self-cleaning and anticorrosion applications under corrosive/abrasive environment.
研究领域:
材料科学
·
表面工程
·
腐蚀防护
·
纳米复合材料
·
功能涂层
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）