CERAMICS INTERNATIONAL
·
2024
·Vol. 50
·期 14
·25541-25547
·
IF 5.1
Hang Zhang,Ahsan Nawaz,Feiyu Huang,Zhiping Zhang,Hongfei Liu
Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films have been synthesized using the sol-gel spin coating . Influences of post-annealing temperatures on crystal structure, morphology, negative thermal expansion (NTE) and optical performances of the thin films were studied using XRD , SEM, XPS, high-temperature XRD and UV–Vis–NIR spectrophotometer. XRD and SEM results show that as-prepared thin film is in an amorphous state with a smooth and dense surface. Orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films were obtained after post-annealing in 550–750 °C. The higher the annealing temperature in 550–750 °C, the better the crystallinity of orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films . In addition, the grain size of the In 0.5 Sc 1.5 Mo 3 O 12 thin film also grows as the annealing temperature increases. The resulting orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films exhibit anisotropic NTE. Its volumetric coefficient of thermal expansion (CTE) is −3.44 × 10 −6 °C −1 , while the CTEs in a -, b - and c -axis directions are −4.70 × 10 −6 °C −1 , 5.37 × 10 −6 °C −1 , and -4.10 × 10 −6 °C −1 in 25–700 °C, respectively. In addition, the transmittance of orthorhombic In 0.5 Sc 1.5 Mo 3 O 12 thin films post-annealed at 750 °C is around 87.75 %–95.03 %.
研究领域:
材料科学
·
无机非金属材料
·
功能薄膜
·
热膨胀调控
·
光学材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 47
·期 4
·4769-4774
·
IF 3.83
Hongfei Liu,Chenjun Zhang,Zhiping Zhang,Xiangdong Meng,Xianghua Zeng
Orthorhombic Sc 2 Mo 3 O 12 films have been successfully prepared via spin coating technique followed by annealing at 500–750 °C. The phase composition, microstructure, morphology and negative thermal behavior of the synthesized Sc 2 Mo 3 O 12 films were investigated. XRD and XPS analysis indicate that as-deposited film is amorphous . Orthorhombic Sc 2 Mo 3 O 12 films can be prepared after post-annealing at 500–750 °C for 1 h. The crystallinity of Sc 2 Mo 3 O 12 films gradually improved with the increase of post-annealing temperature. SEM analysis shows as-deposited film is smooth and compact, and the grain size of Sc 2 Mo 3 O 12 film grows up as the post-annealing temperature increases. Variable temperature XRD analysis demonstrates that the synthesized orthorhombic Sc 2 Mo 3 O 12 films show stable thermo-chemical and anisotropic NTE property in 25–700 °C. The corresponding coefficients of thermal expansion (CTEs) of the orthorhombic Sc 2 Mo 3 O 12 film in a, b and c directions are −6.68 × 10 −6 °C −1 , 5.08 × 10 −6 °C −1 and −4.76 × 10 −6 °C −1 , respectively. The whole unit cell of the orthorhombic Sc 2 Mo 3 O 12 film shrinks and the volumetric CTE of the Sc 2 Mo 3 O 12 thin film is −6.36 × 10 −6 °C −1 , and the linear CTE is about −2.12 × 10 −6 °C −1 ( α v = 3 α l ).
研究领域:
材料科学
·
无机非金属材料
·
功能薄膜
·
热学性能
·
晶体结构
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2017
·
IF 2.714
Jingwen Song,Kai Ma,Tifeng Jiao,Ruirui Xing,Lexin Zhang,Jingxin Zhou,Qiuming Peng
Graphene oxide (GO)-based nanocomposite films via facile and appropriate self-assembly methods have demonstrated many potential applications in wide fields. This study demonstrates a facile and clean route to prepare graphene oxide-dye composite films using Langmuir-Blodgett (LB) technique at room temperature. By electrostatic interaction between cationic dye molecules and negatively charged GO sheets as well as π-π interactions, GO-dye composite LB films were formed spontaneously. As a soft platform for dye molecules, GO sheets induce dye molecules to self-assemble and form highly ordered structures containing H-aggregates and/or J-aggregates. The morphological characterization results show the formation of GO-dye composite films with smooth and dense surfaces. And the spectral results reveal that dye molecules stack in well-organized aggregates on the surface of GO sheets corresponding to monomers in bulk solution. The present research work about GO-dye composite films by LB method may provide new clues to prepare organized composite films and demonstrate potential applications in many fields.
研究领域:
材料科学
·
纳米科技
·
表面化学
·
胶体与界面科学
·
功能薄膜
✓ 已验证
DOI
高影响因子
Small Methods
·
2018
·Vol. 2
·期 6
·1800017
·
IF 0
Pingan Zhu,Tiantian Kong,Chunmei Zhou,Leyan Lei,Liqiu Wang
Natural systems have exceptional capabilities of constructing structures across multiple length scales for remarkable performances from limited choices of building blocks. However, simultaneous control over structures at both the macroscopic and microscopic length scales is restricted by the high requirements in the type and property of building blocks. Here, directed self-assembly of microdroplets in an evaporating liquid is harnessed to fabricate large-scale ordered films with precisely controlled microstructures. Evaporation-induced variations in liquid confinement allow microdroplets to reassemble for large-scale ordered patterns. Deformation of microdroplets into different shapes accurately defines multiple topographical structures at the microdroplet level. The fabrication process is facile and scalable, and works with various materials for manufacturing functional films with tunable properties. These results suggest a facile yet effective strategy for engineering microstructures by combining directed self-assembly with manipulation of the property of building components for both structural fidelity and diversity.
研究领域:
材料科学
·
纳米科技
·
软物质物理
·
表面科学
·
功能薄膜
✓ 已验证
DOI
JOURNAL OF LUMINESCENCE
·
2022
·
IF 4.171
Zhaoping Chen,Qin Wang,Ziyao He,Jiaming Li,Enrou Mei,Xiaojuan Liang,Weidong Xiang
CsPbX 3 (X = Cl, Br, I) perovskites have emerged as promising candidate lasing materials due to their high optical gain , low defect state density, and high absorption coefficient. Unfortunately, they suffer from poor stability, particularly with respect to temperature, moisture, and light exposure, preventing their use in practical optoelectronic applications , such as for amplified spontaneous emission (ASE) with an ultralow laser threshold. Herein, CsPbBr 3 @MCM-41 molecular sieve (CMM) composites are controllably prepared by different ultrasonication and stirring treatments. In addition, different perovskite concentrations and heat-treatment conditions are also considered to demonstrate the ASE behaviors. In addition, CMM@PS (CMMP) and CMM@AB (CMMA) composites were fabricated successfully by further optimizing the mixing ratio of CMM and the polymer. More excitingly, the stability of the CMM@polymer films with respect to the external environment is greatly improved after the polymer coating . To our surprise, the CMM@ploymer thin films demonstrated ASE at room-temperature, with an ASE threshold as low as 0.136 mJ/cm 2 and 0.049 mJ/cm 2 for CMMA and CMMP, respectively. These results clearly shed light upon the control and optimization of CsPbBr 3 perovskite composite films , paving the way for their widespread use in optoelectronic applications .
研究领域:
光学材料
·
纳米复合材料
·
光电子学
·
激光物理
·
功能薄膜
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Na Li,ChunYi Zhi,Haiyan Zhang
The preparation of high specific-capacity pseudocapacitive transition-metal-oxide/hydroxide (TMH) materials into transparent micro-structure electrodes is a great challenge and has become the bottleneck restricting the performance of transparent flexible supercapacitors . Beyond that, extending the operating voltage window is an urgent need for improving energy density . Here, Co(OH) 2 nanosheets and amorphous FeOOH nanowires were prepared into transparent films through a simple and scalable bio-inspired method at the air-solution interface. Both nanostructures are enwrapped in graphene shells (Co@Gr-TFandFe@Gr-TF) for use as transparent asymmetric pseudocapacitive electrodes. The unique encapsulation structures (1) provide pseudocapacitive electrode materials, especially an amorphous FeOOH structure cathode, (2) build up rapid three-dimensional electron and ion transport pathways together with the underlying ITO layer, (3) alleviate the exfoliation and dissolution of the active materials into electrolyte, and (4) extend the potential window of the FeOOH cathode from −0.8 ∼ 0 V to −1.2 ∼ 0 V with minimal cycling stability degradation. The asymmetric transparent and flexible supercapacitor based on Co@Gr-TF//Fe@Gr-TF operated at 1.8 V exhibits good transparency (50.5% at 550 nm), high specific capacitance (25.5 mF cm −2 , one order higher than the maximum value reported for FFT-GP), and high energy density (1.04 mWh cm −3 , comparable to that of nontransparent devices) as well as a long cycle life (10 000 cycles) with high-capacity retention (83.5%).
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
柔性电子学
·
功能薄膜
✓ 已验证
DOI
高影响因子
MACROMOLECULAR CHEMISTRY AND PHYSICS
·
2019
·Vol. 220
·期 18
·1900299
·
IF 2.622
Huidong Yang,Hong Wang,Jingang Feng,Yumin Ye,Wenna Liu
Asymmetric divinyl monomers are attractive candidates for constructing functional polymer thin films owing to their ability to undergo further reactions after polymerization. Here, the first solventless synthesis of poly(allyl methacrylate) (PAMA) film with retention of abundant allyl groups using initiated chemical vapor deposition (iCVD) is reported. It is demonstrated that lower substrate and filament temperatures lead to better allyl retention, while higher temperatures lead to intramolecular cyclization. The retained allyl groups can be further crosslinked under UV light, and the crosslinking degree can be easily tuned by adjusting the exposure time. Patterning of iCVD PAMA films with 20 µm resolution using a TEM grid as photomask is also demonstrated. The reported synthesis method suggests possible solventless incorporation of AMA in thin films as a latent crosslinker or anchoring sites for further functionalization. The solventless patterning can also extend patterning technique to solvent-sensitive and non-planar substrates.
研究领域:
高分子材料科学
·
表面化学
·
功能薄膜
·
光响应材料
·
生物医学工程
✓ 已验证
DOI
高影响因子
Journal of Nanomaterials
·
2019
·Vol. 2019
·期 1
·2769519
·
IF 2.233
Hongchong Guo,Wei Li,Gang Sun,Bo You
We propose a facile and simple synthesis of photoluminescent (PL) carbon dot self-assembled monolayer films (CD-SAMFs) at oil-water interfaces. By using styrene both as the carbon source and the oil phase medium, we got our amazing CD-SAMFs under the copper acetate and hydrogen peroxide (Cu(Ac) 2 -H 2 O 2 ) catalytic-oxidation system. Without any surface modification, the spontaneously formed CD-SAMFs exhibit ultrathin thickness (<10 nm), bright luminescence, high transparency, and hydrophobicity, which have the potential as a new alternative to be used on multifunctional coating films, anticounterfeiting, displays, sensors, and optical devices.
研究领域:
材料科学
·
纳米科技
·
表面化学
·
光电子学
·
功能薄膜
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Rui Huang,Hongye Wang,Cheng Tao,Hua Hao,Zhonghua Yao,Hanxing Liu,Minghe Cao
Thin film capacitors with large energy storage density and high breakdown strength are widely used in modern electronic fields. To solve the problems of interface effect and different polarization mechanism between matrix and fillers in conventional heterogeneous structure composite thin film capacitors, a new-type inorganic microcrystal-amorphous composite film of 0.92BaTiO 3 -0.08Bi(Ni 0.5 Zr 0.5 )O 3 (0.92BT-0.08BNZ) are prepared by sol–gel method. The amorphous matrix improving the breakdown strength is introduced into the film by adjusting preparation technology. Moreover, the nano-scale polar microcrystalline regions (fillers) are introduced and uniformly distributed in the amorphous matrix under various annealing temperatures. Through investigating the influence of different amorphous matrix and microcrystal trend on the dielectric and energy storage properties, it is found that synergistic effect between the polarized microcrystalline regions and the amorphous matrix are optimal at an annealed temperature of 550 ℃. The result shows that a high energy storage density of 103.7 J cm −3 and an efficiency of 88.3% are obtained under the electric field of 8.30MV cm −1 . Simultaneously, the excellent dielectric and energy storage stability is achieved in a wide temperature range of 20–200 °C. Conclusively, this microcrystal-amorphous composite film overcome the low energy storage capability and poor thermal stability of conventional composite films and provide a feasible way for preparing high energy storage performance films.
研究领域:
材料科学
·
介电材料
·
储能技术
·
无机非金属材料
·
功能薄膜
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）