Environmental Pollutants and Bioavailability
·
2019
·
IF 0
Yuehui Tan,Xianqiang Yin,Caiyun Wang,Huimin Sun,Aisheng Ma,Guilong Zhang,Nong Wang
The Cd(II) adsorption of kiwi biochar functionalized with Mg-Fe (3:1) layered double hydroxides (LDH) was studied. And the biochar was got via liquid-phase deposition, by incorporating Mg-Fe layered double hydroxide (Mg-Fe LDH) particles into kiwi biochar (KB/LDH). The batch of sorption experiments were studied, including adsorption kinetics and isotherm and the effects of pH, ion strength (IS) and co-existing ions. The KB/LDH composite showed a strong sorption ability to Cd(II) in aqueous solutions with the adsorption capacity of 25.6 mg g−1, compared with pristine biochar of 1.78 mg g−1. The adsorption of Cd(II) on KB/LDH composite increased with the decreasing of IS, decreased first and then grew larger with the increase of pH and was observed irrespective of the co-existence of K+, Cl− and NO3−. To sum up, the KB/LDH can be potentially used as an alternative adsorbent to amend the water and soil contaminated by Cd(II).
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
MICROPOROUS AND MESOPOROUS MATERIALS
·
2021
·
IF 5.455
Zhe Zhang,Lei Xu,Yani Liu,Runtian Feng,Tong Zou,Yuanshuo Zhang,Yuru Kang,Pengxin Zhou
In order to improve the efficiency of the removal of methylene blue from wastewater, we synthesized activated carbon by thermally activating phosphoric acid-treated mangosteen peels. This activated carbon possessed a great specific surface area (1832 m 2 /g) and exhibited excellent adsorption capacity (871.49 mg/g) for methylene blue. In this study, we varied the impregnation ratios, activation temperatures, and activation time to determine the best conditions for preparing the mangosteen peel activated carbon (MPAC). The optimal conditions included a 1:3 impregnation ratio with activation for 60 min at 450 °C. We characterized the MPAC using a scanning electron microscope, powder X-ray diffraction, thermogravimetric analysis , differential scanning calorimetry , and Fourier transform infrared spectroscopy together with the Brunauer–Emmett–Teller approach. The adsorption experiment results conformed to the pseudo-second-order kinetic model and the Langmuir isotherm model. This proved that physical adsorption dominates in this adsorption process . The synthesized MPAC-5 showed great adsorption performance for a variety of dye wastewater. After three times of recycling, the removal rate of methylene blue is still above 40%. Compared with other biowastes, mangosteen peel has the potential to be synthesized into activated carbon with a high adsorption capacity for dyes.
研究领域:
环境科学
·
材料科学
·
化学工程
·
污染控制
·
吸附技术
·
废物资源化
✓ 已验证
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 15
·8026-8038
·
IF 2.936
Shuli Liu,Zhengyang Duan,Changhua He,Xiaojun Xu,Tianguo Li,Yuhuan Li,Xuan Li,Yao Wang,Longqian Xu
Phosphate-modified baker's yeast (PMBY) was prepared, and used as a novel bio-sorbent for the adsorption of Pb2+ from aqueous solution. The influencing factors, absorption isotherms, kinetics, and mechanism were investigated. The scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR) characterization and elemental analysis of PMBY showed that phosphate groups were successfully grafted onto the surface of yeast. The kinetic studies suggested that the adsorption process followed a pseudo-second-order chemisorption. The adsorption process of Pb2+ using PMBY was spontaneous and endothermic. Furthermore, the adsorption of Pb2+ on PMBY can rapidly achieve adsorption equilibrium (in just 3 min), and the maximum adsorption capacity of Pb2+ on PMBY was found to be 92 mg g−1 at 30 °C, which was about 3 times that of the pristine baker's yeast. The suggested mechanism for Pb2+ adsorption on PMBY was based upon ion-exchange, electrostatic interaction and chelation between the phosphate groups and Pb2+. However, compared with the pristine baker's yeast, the higher capacity and rapid adsorption of PMBY for Pb2+ was mainly due to the chelation and electrostatic interactions between the phosphate groups and Pb2+. In addition, the regeneration experiments indicated that the PMBY was easily recovered through desorption in 0.01 M HCl, and that PMBY still exhibited 90.77% of the original adsorption capacity for Pb2+ after five regeneration cycles. These results showed the excellent regeneration capability of PMBY for Pb2+ adsorption. PMBY has shown significant potential for the removal of heavy metals from aqueous solution due to its rapid adsorption, high-capacity and facile preparation.
研究领域:
环境科学
·
生物化学
·
环境污染治理
·
重金属吸附
·
材料科学
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Zilu Li,Kefei Zhao,Yue Wang,Zirui Zheng,Chenhui Zhang,Yuxia Gao,Fengpei Du
Impact and spread of droplet on superhydrophobic surface are ubiquitous in inkjet printing , pesticide spraying, paint coating, and other fields. However, due to the extremely water-repellent properties of superhydrophobic surface, droplets frequently splash or roll off, causing great waste and serious environmental problems. Thus, searching for an effective strategy to regulate the droplet splash and spread on superhydrophobic surfaces is of remarkable significance. To address the above issues, herein, we demonstrate the controllable regulation on superhydrophobic lotus leaf surface by tuning the double-chain length of surfactants . The outcomes indicate different regularities for droplet splash in a short time (~10 ms) and spread in a relatively long period (~100 s). It can be concluded that dynamic surface tension of surfactant, diffusion rate of surfactant from the bulk to the interface, and assembly disaggregation rate dominate the impact process, whereas the adsorption kinetic and effectiveness of surfactant along with the spreading driving force determine the wetting transition. Surfactant owning suitable hydrophilic and hydrophobic ratio, fast diffusion rate, and unstable assembly could inhibit droplet splash and improve spreading pronouncedly, thereby enhancing the droplet deposition on superhydrophobic surfaces. This study makes original contribution to screen suitable surfactants from the structural aspects, especially double-chain length, which has not been treated in much detail to date. Our work not only creates a big impetus in illuminating the mechanism of surfactant molecular structure on droplet deposition processes but also greatly expands the applications of surfactant in many fields.
研究领域:
胶体与界面化学
·
农业化学
·
材料科学
·
流体力学
·
环境科学
·
应用物理
·
纳米科技
✓ 已验证
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 79
·75855-75861
·
IF 3.289
Qixuan Song,Hui Wang,Baoshan Yang,Fei Wang,Xinrong Sun
A novel silver nanoparticle-modified magnetic multi-walled carbon nanotube composite (Ag-FMWCNTs) was synthesized by embedding Fe3O4 and assembling Ag nanoparticles in one-step. The properties of the Ag-FMWCNTs composites and magnetic multi-walled carbon nanotubes (FMWCNTs) were studied by scanning electron microscopy, vibrating sample magnetometry (VSM) and Fourier transform infrared spectroscopy. The adsorption isotherms, adsorption kinetics and the effects of solution pH and ionic strength to adsorb emerging contaminant sulfamethoxazole (SMX) from aqueous solution on different multi-walled carbon nanotubes-based adsorbents were determined. The results showed that the adsorption kinetics could be explained well by means of the pseudo-second-order and intraparticle diffusion models. The pH experiments showed that maximum adsorption occurred at pH 4. Additionally, all adsorbents had a strong adsorption ability to SMX and the Langmuir maximum capacity followed the order: 5% Ag-FMWCNTs (118.58 mg g−1) > 3% Ag-FMWCNTs (86.41 mg g−1) > MWCNTs (73.69 mg g−1) > 1% Ag-FMWCNTs (70.26 mg g−1) > FMWCNTs (45.13 mg g−1). The spent adsorbents were regenerated in methanol. It was also found that after regenerating four times, multi-walled carbon composites retained up to 80% of their original adsorption performance. Therefore, the Ag-FMWCNTs composite could be used as a potential adsorbent for removing sulfamethoxazole from water.
研究领域:
环境科学
·
纳米技术
·
水污染控制
·
吸附材料
·
药物残留治理
✓ 已验证
DOI
高影响因子
JOURNAL OF SOLID STATE CHEMISTRY
·
2019
·
IF 2.291
Yuanbo Xie,Fangyuan Zhong,Hongxu Chen,Danni Chen,Jiawen Wang,Junkuo Gao,Juming Yao
In this paper, novel hydrogen-bonded metal-complex frameworks MPM-1-TIFSIX and HOF-21 were selected as adsorbents to adsorb iodine. MPM-1-TIFSIX and HOF-21 were prepared by layering method and mixed stirring method, respectively. The structures of the two HOFs were characterized in detail by XRD , BET, TGA and FT-IR. The adsorption behavior and adsorption capacity of MPM-1-TIFSIX and HOF-21 for iodine were investigated in detail. The experimental data showed that the equilibrium adsorption amounts of MPM-1-TIFSIX and HOF-21 were 205.51 mg/g and 172.86 mg/g, respectively. The adsorption process of MPM-1-TIFSIX was conformed to be pseudo-second-order kinetic, while the adsorption process of HOF-21 was conformed to be pseudo-first-order kinetic. The results indicated that HOFs could be used as iodine capture and storage materials.
研究领域:
材料化学
·
环境化学
·
配位化学
·
多孔材料
·
吸附科学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Shujuan Lian,Xiaoshuang Shi,Mingyi Lu,Mengdan Zhang,Xiaohuan Dong,Xu Li,Quan Feng,Rongbo Guo
Due to the persistence in residue and the emission to environment, antibiotics have become the emerging contaminants. Tetracyclines, as the largest amount of antibiotics in the breeding industry, were investigated in this study. For eliminating the tetracyclines, anaerobic culture was enriched from livestock waste after four generations and FeOn(OH)m modified oyster shell powders (OSPs) were amended into the enrichment culture as auxiliary method. Tetracycline and oxytetracycline were selected as the model compounds. The adsorption models (Langmuir and Freundlich isotherms) of tetracycline and microbes on OSPs were simulated respectively. With the addition of FeOn(OH)m modified OSPs, the transformation efficiency of oxytetracycline achieved 81.5% after 22 days’ incubation, approximately 1.85 times higher than the 4th generation (G-IV) enrichment culture without modified OSPs. Dehydration, demethylation, dehydroxylation and decarboxylation took place under anaerobic condition, inferred from the detected metabolites transformed from oxytetracycline. Genus Methanosarcina and two operational taxonomic units (OTUs) assigned to order Clostridiales , showed an increasing trend on abundance, indicating the contribution to transformation of oxytetracycline. Therefore, the FeOn(OH)m modified OSPs and enrichment culture can accelerate the transformation of oxytetracycline simultaneously, indicating a promising utilization not only for waste water system but also for antibiotic contaminated biomass treatment.
研究领域:
环境微生物学
·
污染物生物降解
·
环境工程
·
抗生素去除
·
吸附材料
·
厌氧消化
·
药物代谢
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Weiyi Zhang,Haozhen Zhang,Xinglian Xu,Xue Zhao
The oil polarity was hypothesized to significantly influence the microscopic conformation of interfacial myofibrillar protein (MP) and thus the mesoscopic interfacial rheology of MP film , which ultimately tuned the macroscopic stability of MP-stabilized emulsions. In this research, the inner mechanism was revealed hierarchically based on emulsions multi-scale properties, by a combination of in vitro interfacial concentration measurement, dynamic interfacial tension measurement and interfacial dilatational rheology (highlighting Lissajous plots). Then, the above conclusion was verified through in silico molecular dynamic simulation. At macroscopic level, the light scattering results showed that emulsion prepared with higher polarity oil exhibited higher physical stability. This could be explained from the mesoscopic perspective that: (1) the adsorption dynamics of MP was faster (though lower diffusion rate, but higher penetration and rearrangement rate) on the higher polarity interface, which decreased interfacial tension more efficiently; (2) adsorption ratio, surface load and desorption ratio indicated that ‘multilayer interfacial film’ was formed by loosely-bound MP on the lower polarity interface, which decreased the effective interfacial coverage to impair emulsions stability; (3) Lissajous plots showed that interfacial structure with higher stability against large deformation was formed on the higher polarity oil interface. Finally, the microscopic molecular mechanism for explaining the above findings was revealed by in silico molecular dynamic simulation: though MP was less unfolded on the higher polarity interface leading to weaker intermolecular hydrophobic interactions, this compact molecular structure with stronger intramolecular rigidity predominantly contributed to steadier interfacial film structure. This multi-scale study provides a deep insight into the inner relationship between oil polarity and emulsions stability.
研究领域:
食品科学
·
胶体与界面化学
·
蛋白质构象
·
软物质物理
·
分子模拟
✓ 已验证
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2022
·Vol. 10
·期 6
·108733
·
IF 7.968
Hanhan Huang,Zhaosong Li,Haiyan Wang,Caifeng Xia,Pingke Yan,Qian Zhang,Zilin Meng
Microplastics (MPs) are widely presence in soil, and the uncertain influence of MPs is ineluctable. In this study, the influence of removal efficiency for heavy metals by LDHs with the presence of polyethylene (PE) and polypropylene (PP) is investigated. And the removal efficiency of heavy metals Cu 2+ , Pb 2+ , Zn 2+ , Ni 2+ by LDHs from soil is investigated by contact time, initial concentration, PP/PE contents, pH and coexisting ions. The adsorption capacities of heavy metals with the presence of PP/PE are larger and the effects with high content of PP/PE is more obvious on removal of heavy metals. The isothermal experiment data are well described by the Generalized Langmuir isothermal model, denoting that the adsorption sites on the absorbents are certain, and the sites are inhomogeneous with different adsorption energy. In order to further explore the influence of PP/PE on the removal of heavy metals by LDHs, the interaction between LDHs and PP/PE is analyzed by XRD , FT-IR, Zeta potential and SEM. The sites energy distribution theory is employed to analyze the distribution of accessible adsorption sites and the heterogeneity of sites. The results show that with the presence of PP/PE in soil, LDHs interacts with PP/PE preferentially on account of electrostatic attraction, and the combination of LDHs and PP/PE increases the accessible adsorption sites for the removal of heavy metals and is beneficial to the adsorption process . These findings contribute to understanding environmental behavior of heavy metals with the presence of MPs and guide the application of LDHs in soil.
研究领域:
环境科学
·
土壤修复
·
纳米材料应用
·
环境污染化学
·
吸附动力学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）