Journal of Energy Storage
·
2022
·
IF 8.907
Dongguang Yan,Shilong Zhao,Chi Ge,Jianzhou Gao,Chengyu Gu,Yingqiang Fan
The complicated preparation process and difficulty of recycling were serious obstacles to the widespread use of solid-solid phase change materials (PCMs). Herein, we reported a novel thermoplastic solid-solid PCMs prepared by a facile one-step feeding method. In this study, the esterification and transesterification among the molten mixture of PBT , PEG and adipic acid were conducted to prepare thermoplastic PEG/PBT/Adipic acid copolymer-based PCMs. Adipic acid, as an auxiliary encapsulation agent, could prevent effectively PEG leakage of PEG/PBT/Adipic acid copolymer-based PCMs with high PEG and low PBT content during the phase change process . For PCM-6 containing 91 wt% PEG, 8 wt% PBT and 1 wt% adipic acid, there were no changes in the shape and chemical structure after multiple thermal cycles. The TG results presented that the initial thermal degradation temperature of PCMs-6 was above 200 °C, which was much higher than the processing and working temperature of PCMs-6. The latent heat of PCMs-6 could reach 136.8 J/g, showing great potential for energy storage, especially in the field of green buildings.
研究领域:
材料科学
·
高分子化学
·
能源材料
·
热功能材料
·
绿色建筑
✓ 已验证
DOI
高影响因子
CHINESE CHEMICAL LETTERS
·
2016
·Vol. 28
·期 1
·49-54
·
IF 1.947
Qi-Feng Li,Chao Wang,Xiao-Zheng Lan
Latent heat storage performance of a layered perovskite-type compound, 1-C 14 H 29 NH 3 ) 2 ZnCl 4 (C 14 Zn), embedded in a series of silica gel (SG) with pore sizes of d = 15–200 nm is investigated using differential scanning calorimetry (DSC), and powder X-ray diffractions (XRD). C 14 Zn in the nanopores of silica gel shows size-dependent phase transition temperature, enthalpy change and supercooling. They have a stable transition temperature and heat capacity at each size in a short-term thermal cycling. Similar X-ray diffraction patterns are observed for the nano-sized and the bulk C 14 Zn. The encapsulation of a phase change material in nanopores is a new way of tuning its thermal energy storage properties for a wider range of temperature regulation.
研究领域:
材料科学
·
热力学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY
·
2011
·Vol. 110
·期 3
·1437-1442
·
IF 1.752
Lan X. Z.,Pei H. R.,Yan X.,Liu W. B.
Phase behavior of dodecane–tetradecane ( n -C 12 H 26 –C 14 H 30 , n -C 12 –C 14 ) binary system in bulk and confined in SBA-15 (pore diameters 8 nm; 15.9 nm) has been investigated by differential scanning calorimetry and transmission electron microscopy. The bulk system possesses some special phases relating to the rotator phase in normal alkanes. Dodecane–tetradecane mixtures confined in SBA-15 (8 nm) are a system miscible both in solid and liquid states with a phase diagram of a smooth curve. Dodecane–tetradecane system confined in SBA-15 (15.9 nm) exhibits not only solid–liquid (s–l) in all compositions but solid–solid transition in mole fractions of tetradecane 0.1–0.6, which forms a phase diagram of “loop line” shape. Melting temperatures of n -C 12 –C 14 /SBA-15 (8 nm) are lower than those of n -C 12 –C 14 /SBA-15 (15.9 nm) in all mole fractions. The evolution of the phase diagram of n -C 12 –C 14 confined in 8 nm, 15.9 nm pore sizes of SBA-15 and in bulk, respectively, shows a dramatic effect of confinement on phase behavior of normal alkane mixtures. The s–l phase boundary lines of n -C 12 –C 14 /SBA-15 (8, 15.9 nm) are fitted as \( T_{\text{m,r}}^{x} \) being [ \( xT_{{\text{m} ,r}}^{A} + \left( {1 - x} \right)T_{\text{m,r}}^{B} - D \) ], where D is a polynomial ∑ a
i
x
i , i = 1, 2,···, n ( A = C 14 , B = C 12 ).
研究领域:
物理化学
·
材料科学
·
纳米限域效应
·
热分析
·
软物质物理
✓ 已验证
DOI
高影响因子
Journal of Macromolecular Science Part A-Pure and Applied Chemistry
·
2016
·
IF 0.963
Xuelin Huang,Jing Guo,Xueyong Gong,Shenglin Li,Yumei Gong,Qingda An,Sen Zhang,Fucheng Guan
Pentaerythritol/butane tetracarboxylic acid/polyethylene glycol (PBPEG) crosslinking copolymers as a novel solid-solid phase change material (SSPCM) were successfully synthesized through the reaction mechanism and conditions of hydroxyl-carboxyl condensation reaction. The composition and chemical structure, crystalline properties, phase change behaviors, thermal reliability and chemical stability of PBPEG crosslinking copolymers were investigated by Fourier transform infrared spectroscopy (FT-IR), wide-angle X-ray diffraction (WAXD), polarization optical microscopy (POM), differential scanning calorimetry (DSC), and thermogravimetry (TGA), respectively. The results show that PBPEG crosslinking copolymers have typical solid-solid phase transition temperatures in the range of 10.31∼53.27°C and high latent heat enthalpy in the range of 89.6∼102.8 J/g, the synthesized SSPCMs have good thermal reliability and chemical stability after 300 thermal cycles, and PBPEG crosslinking copolymers have good thermal stability before 364°C. In summary, the synthesized PBPEG crosslinking copolymers could be potentially used for thermal energy storage.
研究领域:
材料科学
·
高分子化学
·
热能存储
·
相变材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）