Lu Ju,Buyun Yu,Hao Chen,Zhida Xiao,Wei Xiang,Junlin Zhan,Chao Zhang,Zhenguo Liu,Li Tao,Weibing Lu
As a noncontact target recognition technique, radio-frequency identification (RFID) technology demonstrates attractive potential in constructing human–machine interaction (HMI) systems. However, the current development of RFID technologies in HMI systems is hampered by critical challenges in manufacturing high-performance RFID readers with superior flexibility and wearing comfort. Hence, we propose a multilevel printing strategy to overcome the difficulties in manufacturing high-performance large-scale microwave systems. Compared to traditional processes, the RFID system fabricated by the hybrid additive manufacturing technique exhibits equivalent electromagnetic performance and has obvious advantages in terms of manufacturing cost and environmental friendliness. A printed reconfigurable antenna with intelligent radiation mode is seamlessly integrated with the reader circuit via a “one-step” printing technology. Additionally, through chemical doping and artificial intelligence (AI) prediction, we have developed a modified polydimethylsiloxane (PDMS) encapsulation to miniaturize the system volume and enhance reliability. Electromagnetic and mechanical measurements demonstrated that our flexible RFID platform offers superior reliability and stability during long-term daily use. The RFID platform possesses exceptional capabilities in target positioning and accurate identification, demonstrating unique potential in noncontact sensing and recognition, which are highly demanded by flexible and wearable HMI systems.
Direct synthesis of silver conductive film on PET substrate by inkjet printing silver citrate conductive ink was presented in this paper. This kind of conductive ink contained silver citrate as silver precursor, 1,2-diaminopropane as complex agent dissolving the silver salt and methanol and isopropanol as a media adjusting the viscosity and surface tension. The formation of silver-amine complex reduced the decomposition temperature from 180 °C to 135 °C, thus the ink could be cured at relatively low temperature. The film reached the lowest resistivity of 17 μΩ cm after cured at 150 °C for 50 min, 3.1 μΩ cm at 230 °C and possessed high reflection and excellent adhesive property. Electrical conductivity, surface morphology and composition were investigated by four-point probe method, scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS). It is demonstrated how the cured condition affects the silver film. Moreover, radio-frequency identification (RFID) antenna was fabricated by inkjet printing, which opens up routes for the flexible electronics fabrication.
Hydrogel-based electronics have inherent similarities to biological tissues and hold potential for wearable applications. However, low conductivity, poor stretchability, nonpersonalizability, and uncontrollable dehydration during use limit their further development. In this study, projection stereolithography 3D printing high-conductive hydrogel for flexible passive wireless sensing is reported. The prepared photocurable silver-based hydrogel is rapidly planarized into antenna shapes on substrates using surface projection stereolithography. After partial dehydration, silver flakes within the circuits form sufficient conductive pathways to achieve high conductivity (387 S cm −1 ). By sealing the circuits to prevent further dehydration, the resistance remains stable when tensile strain is less than 100% for at least 30 days. Besides, the sealing materials provide versatile functionalities, such as stretchability and shape memory property. Customized flexible radio frequency identification tags are fabricated by integrating with commercial chips to complete the accurate recognition of eye movement, realizing passive wireless sensing.
危险品化学品经营许可证（带存储）