The impact of phase structure on piezoelectric performances of <001> textured Na0.5Bi0.5TiO3(NBT) based lead-free ceramics was studied, including 0.88NBT-0.08K0.5Bi0.5TiO3-0.04BaTiO3(88NBT) with morphotropic phase boundary (MPB) composition and 0.90NBT-0.07K0.5Bi0.5TiO3-0.03BaTiO3(90NBT) with rhombohedral phase. Both textured ceramics exhibit a high Lotgering factor, being on the order of f~96%. The piezoelectric coefficients of the textured 88NBT and 90NBT ceramics are increased by 20% and 60%, respectively, comparing to their randomly oriented ceramics. The piezoelectric enhancement of 90NBT textured ceramic is three times higher than 88NBT, revealing the phase structure plays a significant role in enhancing the piezoelectric performances of textured ceramics. Of particular significance is that the 90NBT textured ceramic exhibits almost hysteresis-free strain behavior. The enhanced piezoelectric property with minimal strain hysteresis is attributed to the <001> poled rhombohedral engineered domain configuration.Keywords:textured ceramics;phase structure;rayleigh analysis;strain behavior
High dielectric constant and low modulus of thermoplastic polyurethane elastomers (PUEs) are required for various applications in actuators, sensors and energy harvestings. In this work, we controlled the microphase separated morphology of PUEs by regulation of the content of hydroxyl-terminated four-armed polycaprolactone (4amPCL) chain extender to achieve J-shaped stress-strain curve with low modulus and high electromechanical properties. Our results showed that the hydrogen bonding between hard segments (HSs) and crystallization of soft segment (SS) are significantly impeded by long-chain branched structure when added lower molar fraction (<20% of chain extenders) of 4amPCL as chain extender, whereas the branched long-chains are embedded in microphase separated hard and soft domains (HD and SD) to form strip shaped interconnected hard domain (HD) rich regions when added higher molar fraction (>20% of chain extenders) of 4amPCL as chain extender. The PUE with 29% of 4amPCL (PU-4amPCL-0.29) showed lower modulus (1.5 MPa), higher tensile strength (17.5 MPa) at 1048% of elongation, and 3.9% of actuation strain at 20 kV/mm, and higher contribution (48.1%) of Maxwell stress on actuation strain at 20 kV/mm. We found that the microphase separation of branched long-chains induced semi-interpenetration polymer network like structure of PUEs played an important role in exhibiting J-shaped stress-strain behavior. Our results can provide new insight on fabrication of high electromechanical performance of dielectric polyurethane elastomers.