OPTICS AND LASER TECHNOLOGY
·
2024
·
IF 4.6
Shulei Li,Zhenxu Lin,Quantong Deng,Fu Deng,Mingcheng Panmai,Junying Chen,Yuheng Mao,Shimei Liu,Jun Dai,Yunbao Zheng,Rui Huang,Sheng Lan
Realization of long-term stable lasing from all-inorganic perovskite supercrystals is highly desirable for practical applications in optoelectronic devices. However, lasing from perovskite supercrystals excited by continuous wave laser light remains a challenge due to the photoluminescence degradation induced by thermal accumulation. Here, we report highly stable lasing with low threshold fom a CsPbClBr 2 supercrystal placed on a thin Ag film, which form a CsPbClBr 2 /Ag microcavity, by managing the thermal distribution inside the CsPbClBr 2 supercrystal. Combined numerical simulations and lifetime measurements, the localized electric field in such a hybrid microcavity leads to a spatially localized temperature distribution, which plays a crucial role in suppressing the thermal accumulation on the surface and in eliminating non-radiative recombination defects. The effective thermal management in the hybrid microcavity renders highly stable lasing with low threshold under the irradiation of continuouw wave laser light. Our findings provide a feasible and universal approach to the development of long-term stable perovskite laser.
研究领域:
光学工程
·
凝聚态物理
·
材料科学
·
纳米光子学
·
激光技术
✓ 已验证
DOI
高影响因子
Small
·
2021
·Vol. 18
·期 8
·2106323
·
IF 13.281
Jingwei Zhu,Benlin He,Xinpeng Yao,Haiyan Chen,Yanyan Duan,Jialong Duan,Qunwei Tang
The precise phase control of Cs-Pb-Br derivatives from 3D CsPbBr 3 to 0D Cs 4 PbBr 6 highly determines the photovoltaic performance of all-inorganic CsPbBr 3 perovskite solar cells (PSCs). Herein, the preferred phase conversion from precursor to Cs-Pb-Br derivatives is revealed by theoretically calculating the Gibbs free energies (∆ G ) of various phase conversion processes, allowing for a simplified multi-step solution-processable spin-coating method to hinder the formation of detrimental 0D Cs 4 PbBr 6 phase and enhance the photovoltaic performance of a PSC because of its large exciton binding energy, which is regarded as a recombination center. By further accelerating the interfacial charge extraction with a novel 2D transition metal dichalcogenide ReSe 2 , the hole-free CsPbBr 3 PSC achieves a champion efficiency of 10.67% with an impressive open-circuit voltage of 1.622 V and an excellent long-term stability. This work provides an in-depth understanding on the precise Cs-Pb-Br perovskite phase control and the effect of derivatives on photovoltaic performance of advanced CsPbBr 3 PSCs.
研究领域:
材料科学
·
光伏技术
·
纳米材料
·
能源化学
·
半导体物理
✓ 已验证
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2022
·
IF 5.6
Min Yang,Yujia Yan,Enzhou Liu,Qian Sun,Jun Fan
In recent years, all-inorganic perovskite has been extensively studied due to its excellent photoelectric properties, but the application of Cs n PbBr 2+ n perovskite with excellent stability in the field of chemical sensing has yet to be developed. Herein, Cs 4 PbBr 6 /CsPbBr 3 with good stability was successfully prepared by controlling the synthesis temperature to 100 ° C. The fluorescence intensity of Cs 4 PbBr 6 /CsPbBr 3 exhibited 2,4-dinitriphenylhydrazine (DNPH) concentration-dependent characteristics and could be used for sensing DNPH based on the dynamic quenching process triggered by the collision between Cs 4 PbBr 6 /CsPbBr 3 and DNPH. A good linear model was established based on the detection signal and DNPH concentration in the range of 0.05∼30 mg/L and the detection limit was 0.033 mg/L. This method was applied to detect DNPH in soil and tap water samples with satisfactory results obtained. Therefore, this research broadens the application of Cs n PbBr 2+ n in the field of quantitative detection and is expected to be developed into a fluorescent sensor for the detection of hydrazine substances.
研究领域:
分析化学
·
材料科学
·
环境监测
·
传感器技术
·
光电子学
✓ 已验证
DOI
高影响因子
Small
·
2017
·Vol. 13
·期 25
·1700364
·
IF 8.643
Xuhai Liu,Dejian Yu,Fei Cao,Xiaoming Li,Jianping Ji,Jun Chen,Xiufeng Song,Haibo Zeng
All-inorganic photodetectors based on scattered CsPbBr 3 nanoplatelets with lateral dimension as large as 10 µm are fabricated, and the CsPbBr 3 nanoplatelets are solution processed governed by a newly developed ion-exchange soldering mechanism. Under illumination of a 442 nm laser, the photoresponsivity of photodetectors based on these scattered CsPbBr 3 nanoplatelets is as high as 34 A W −1 , which is the largest value reported from all-inorganic perovskite photodetectors with an external driven voltage as small as 1.5 V. Moreover, the rise and fall times are 0.6 and 0.9 ms, respectively, which are comparable to most of the state-of-the-art all-inorganic perovskite-based photodetectors. All the material synthesis and device characterization are conducted at room temperature in ambient air. This work demonstrates that the solution-processed large CsPbBr 3 nanoplatelets are attractive candidates to be applied in low-voltage, low-cost, ultra highly integrated optoelectronic devices.
研究领域:
材料科学
·
光电子学
·
纳米科技
·
半导体器件
·
凝聚态物理
✓ 已验证
DOI
高影响因子