Regenerative Biomaterials
·
2023
·
IF 6.7
Zheng Zexiang,Yang Xing,Fang Min,Tian Jinhuan,Zhang Shuyun,Lu Lu,Zhou Changren,Xu Changpeng,Qi Yong,Li Lihua
Chronic diabetic wound healing remains a formidable challenge due to susceptibility to bacterial infection, excessive oxidative stress, and poor angiogenesis. To address these issues, a sodium alginate (SA) based photothermal hydrogel dressing with multifunction was fabricated to facilitate wound treatment. Ceria nanoparticles (CeO2NPs) was synthesized, and their antibacterial performance by near-infrared light triggered photothermal effects was first studied and verified in this work. In addition, to release CeO2NPs to achieve antioxidation and pro-vascularization, thermosensitive gelatin (Gel) was utilized to embed the nanoparticles in advance and then composited in SA hydrogel networks. SA network was finally strengthened by acid soaking to form partially crystalline regions to act as natural crosslinkers. Results showed that the Gel/SA/CeO2 hydrogel displayed temperature-responsive release of CeO2NPs, significant antibacterial and antioxidative activity, as well as the ability to remove without injury and promote infected diabetic wound healing with low cytotoxicity, according to antibacterial investigations, cell studies, and in vivo animal studies. This research offers not only a successful method for quickening the healing of diabetic wounds but also a fresh approach to the general use of CeO2NPs.
研究领域:
材料科学
·
生物医学工程
·
纳米技术
·
伤口愈合
·
生物材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS & DESIGN
·
2024
·
IF 7.6
Changxin Xiang,Zijian Guo,Qing Zhang,Zehua Wang,Xiaona Li,Weiyi Chen,Xiaochun Wei,Pengcui Li,Chuan Xiang
Due to the limited self-healing ability of cartilage, cartilage defect repair remains a challenge in clinical treatment. Therefore, there is a need to provide patients with a promising cartilage defect repair strategy. In this study, we have reported an icariin-loaded PVA based biocompatible hydrogel scaffold for cartilage defect repair. The PTGH+Icariin hydrogel was prepared by a simple physical cross-linking method and consisted of polyvinyl alcohol (PVA), tannic acid (TA), gelatin (Gel), hyaluronic acid (HA) and icariin. Inspired by the natural cartilage matrix compositions, the Gel and HA were used to improve the bioactivity and biocompatibility of hydrogel. Furthermore, icariin was introduced to further enhance the hydrogel’s ability for cartilage regeneration. The results showed that PTGH+icariin hydrogel exhibited porous microstructures and tough mechanical properties. In vitro cell experiments confirmed PTGH+Icariin hydrogels could promote chondrocytes proliferation, chondrocytes spreading and chondrocytes migration. Meanwhile, the PTGH+Icariin hydrogel demonstrated the ability to promote the cartilage regeneration in a rat cartilage defect model. In particular, the implantation of PTGH+Icariin hydrogel could facilitate the restoration of motor function in rats. This study will provide a potential approach for the treatment of cartilage defects.
研究领域:
组织工程
·
生物材料
·
生物医学工程
·
再生医学
✓ 已验证
产品关联
DOI
高影响因子
MACROMOLECULAR BIOSCIENCE
·
2022
·Vol. 22
·期 5
·2100441
·
IF 5.859
Yongyao Tan,Dan Chen,Yunming Wang,Wei Wang,Lingjuan Xu,Rong Liu,Chunxiu You,Guigang Li,Huamin Zhou,Dequn Li
Constrained by the existing scaffold inability to mimic limbal niche, limbal bio-engineered tissue constructed in vitro is challenging to be widely used in clinical practice. Here, a 3D nanofiber-aerogel scaffold is fabricated by employing thermal cross-linking electrospinned film polycaprolactone (PCL) and gelatin (GEL) as the precursor. Benefiting from the cross-linked (160 °C, vacuum) structure, the homogenized and lyophilized 3D nanofiber-aerogel scaffold with preferable mechanical strength is capable of refraining the volume collapse in humid vitro. Intriguingly, compared with traditional electrospinning scaffolds, the authors’ 3D nanofiber-aerogel scaffolds possess enhanced water absorption (1100–1300%), controllable aperture (50–100 µm), and excellent biocompatibility (optical density value, 0.953 ± 0.021). The well-matched aperture and nanostructure of the scaffolds with cells enable the construction of limbal bio-engineered tissue. It is foreseen that the proposed general method can be extended to various aerogels, providing new opportunities for the development of novel limbal bio-engineered tissue.
研究领域:
组织工程
·
生物材料
·
再生医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Healthcare Materials
·
2022
·Vol. 12
·期 1
·2201594
·
IF 11.092
Yan Hu,Yuanbo Jia,Siwei Wang,Yufei Ma,Guoyou Huang,Tan Ding,Dayun Feng,Guy M. Genin,Zhao Wei,Feng Xu
Brain lesions can arise from traumatic brain injury, infection, and craniotomy. Although injectable hydrogels show promise for promoting healing of lesions and health of surrounding tissue, enabling cellular ingrowth and restoring neural tissue continue to be challenging. It is hypothesized that these challenges arise in part from the mismatch of composition, stiffness, and viscoelasticity between the hydrogel and the brain parenchyma, and this hypothesis is tested by developing and evaluating a self-healing hydrogel that not only mimics the composition, but also the stiffness and viscoelasticity of native brain parenchyma. The hydrogel is crosslinked by dynamic boronate ester bonds between phenylboronic acid grafted hyaluronic acid (HA-PBA) and dopamine grafted gelatin (Gel-Dopa). This HA-PBA/Gel-Dopa hydrogel could be injected into a lesion cavity in a shear-thinning manner with rapid hemostasis, high tissue adhesion, and efficient self-healing. In an in vivo mouse model of brain lesions, the multi-functional injectable hydrogel is found to support neural cell infiltration, decrease astrogliosis and glial scars, and close the lesions. The results suggest a role for extracellular matrix-mimicking viscoelasticity in brain lesion healing, and motivate additional experimentation in larger animals as the technology progresses toward potential application in humans.
研究领域:
神经科学
·
材料科学
·
生物材料
·
组织工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Wei Cheng,Huilin Wen,Haixia Shen,Chenwei Fu,Erkuang Miao,Dongbao Li,Xiaoqiang Chen,Chi Hu,Ziyi Yu
Polymer hydrogels are instrumental in cell immobilization for biomanufacturing, yet traditional hydrogel bioreactors often compromise cell viability, function, and mass transfer. This results in uncontrolled microbial proliferation and significant cell leakage, thereby impeding the continuous production of high-value products. To address these challenges, we introduce an innovative liquid microcavity technique employing a blend of Gelatin-methacryloyl (Gel-MA) and Pluronic F127diacrylate (F127-DA) for precision bioprinting, followed by selective enzymatic digestion of gelatin to create microbial habitats. Through tailoring of the hydrogel’s pore structure and integration of diverse networks, our approach facilitates controlled nutrient transfer, efficient waste removal, and stable mechanical support, all while maintaining a leak-free suspension culture of microorganisms. We validated the effectiveness of our method by fabricating yeast-infused Three-dimensional (3D) lattice constructs, successfully achieving continuous fermentation of glucose into ethanol in a flow reactor with minimal efficiency reduction (≥90 % yield) over five cycles. This research not only confronts the spatial limitations inherent in hydrogel-based systems but also demonstrates a foundational potential for revolutionary change in biomanufacturing practices.
研究领域:
生物技术
·
材料科学
·
生物工程
·
微生物学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）