Crystals
·
2022
·Vol. 12
·期 2
·144
·
IF 2.67
Shun Zhou,Xiaotao Zhang,Han Zhou,Dongxu Li
In the present research work, the ternary effects of varying dosages of graphene oxide encapsulated silica fume (GOSF), nano-silica sol (SS), and fly ash (FA) on the rheological properties, compressive strength, the content and crystal size of calcium hydroxide (CH), porosity, water absorption, and microstructure of cement were studied. The results showed that the incorporation of SF improved the dispersion of GO in the cement matrix. GOSF was prepared through electrostatic attraction between the positively charged SF and negatively charged GO. The ternary mixture of GOSF, SS, and FA had a synergistic effect that improved the performance of cement. When the curing age of cement reached 28 days, the compressive strength reached a peak of 86.5 MPa, the minimum values of content and crystal size of CH were 11.55% and 45.69 nm, respectively, and the minimum values of water absorption and porosity were 0.0011 cm/s0.5and 13.56%, respectively. In terms of microstructure, the denser structure of C-S-H gel and the regular arrangement of CH were noticed.Keywords:silica fume;silica sol;graphene oxide;fly ash;orthogonal experiment
研究领域:
土木工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PAPERS
·
2018
·Vol. 72
·期 12
·2997-3003
·
IF 0.963
Guo Dongqing,Fu Likang,Wang Shixing,Zhang Libo,Peng Jinhui
A new purification method for molybdenum disulfide via NaNO 3 –HCl–HNO 3 synergistic leaching at 80 °C was developed. The effects of the concentration of NaNO 3 , HCl, and HNO 3 , and liquid–solid ratio and the leaching time on the purification of molybdenum disulfide were investigated by orthogonal array design methodology. The results of Taguchi method utilizing L 25 (5 5 ) orthogonal array indicated that the NaNO 3 concentration had the greatest impact on the purification of molybdenum disulfide. The optimum conditions for the purification of molybdenum disulfide were as follow: concentration of NaNO 3 = 2.5%, concentration of HCl = 11%, concentration of HNO 3 = 1.0%, liquid–solid ratio = 3, and the leaching time = 10 h. Under optimum conditions, the content of molybdenum increased from 55.1 to 59%, and the contents of iron, copper, lead, and calcium decreased from 0.35 to 0.21%, 0.027 to 0.008%, 0.054 to < 0.005%, and 0.27 to 0.035%, respectively. Based on molecular formula of molybdenum disulfide, the content of molybdenum disulfide increased from 91.93 to 98.44%. XRD and SEM indicated that this method removed only the impurities and did not affect the phase and particle size of molybdenum disulfide. The results show that the new purification method avoids the roasting process and will achieve the “green” production. The new method based on orthogonal array is effective for the purification of molybdenum disulfide via acid leaching.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
CRYSTAL RESEARCH AND TECHNOLOGY
·
2025
·
IF 1.9
Xingchao Fan,Bangfu Huang,Zhe Shi,Linjing Yang,Fu Yuan,Keying Zhu,Daoping Zhan
Aiming at the problems of low crystallization rate and uneven particle size during evaporative crystallization of ammonium sulfate mother liquor (a by-product of ammonia desulfurization of sintered flue gas), this study investigated via orthogonal tests the effects of evaporation temperature, pH, stirring rate, and calcium sulfate addition on crystallization amount, average particle size, and coefficient of variation (C.V.). The results showed: For crystallization amount, the influence degree was evaporation temperature>pH>stirring rate>calcium sulfate addition; for average particle size, it was stirring rate>pH>evaporation temperature>calcium sulfate addition; for C.V. value, it was stirring rate>pH>calcium sulfate addition>evaporation temperature. Crystal morphologies included hexahedral, columnar, lamellar, etc., with aggregation under some conditions. Crystals contained calcium, nitrogen, oxygen, and sulfur elements(Ca, N, O, S); Ca content increased with calcium sulfate addition. Ammonium sulfate crystals' diffraction peaks matched pure ammonium sulfate, with the highest peaks at pH 5.0, 250 rpm stirring, 3500 mg·L −1 calcium sulfate, and 333.15K.
研究领域:
化学工程
·
结晶学
·
环境工程
·
无机化学
·
过程优化
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF BIOMATERIALS APPLICATIONS
·
2022
·
IF 2.712
Junjing Zhou,Xinglian Wu,Chaochen Zhao
Hepatocyte scaffold is an essential part in bioartificial liver device. We have designed a novel hepatocyte scaffold based on porcine liver extracellular matrix (ECM) and chitosan (CTS) fabrics. This CTS-ECM scaffold can improve cell adhesion and proliferation. In the present study, an orthogonal test was designed to optimize the CTS/ECM composite scaffold, in which ECM concentration, EDC concentration and EDC to NHS ratio were taken as factors, proportion of nitrogen element and hydroxyproline content as indicators. The cytocompatibility of the novel scaffold for C3A hepatocytes was analyzed in vitro. The orthogonal test demonstrated that the optimal scaffold should be based on ECM concentration of 5 mg/mL, EDC concentration of 5 mg/mL, and EDC to NHS ratio 1:1. C3A hepatocytes cultured on the optimized CTS-ECM scaffolds showed stronger proliferation and functionality than those on Cytodex3 microcarriers (p < 0.05). The CTS/ECM composite scaffold may be widely used as a promising hepatocyte culture carrier, especially in bioartificial liver support systems.
研究领域:
组织工程
·
生物医学工程
·
细胞生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
TALANTA
·
2020
·
IF 5.339
Qingmei Chen,Ran Gao,Li Jia
A colorimetric aptasensor was developed for selective and sensitive detection of Salmonella typhimurium ( S. typhimurium ) based on the enhancement of bacteria for the peroxidase-like activity of dual aptamers modified bovine serum albumin stabilized-gold nanoclusters ( [email protected] ). Micro-sized bacteria was found to be able to capture [email protected] and 3,3′,5,5′-tetramethylbenzidine (TMB), thus promoting the proximity of [email protected] to TMB and greatly increasing the local concentrations of the enzyme-mimetic nanoparticles and their substrate. As a result, addition of bacteria promoted the formation of blue products in the catalytic system, which was utilized to achieve bacteria detection by colorimetry . The parameters influencing the colorimetric aptasensor were optimized by an orthogonal test. Under the selected conditions, the aptasensor exhibited a wide linear response to S. typhimurium in the concentration range of 10 1 –10 6 cfu mL −1 with a detection limit as low as 1 cfu mL −1 . The feasibility of the aptasensor was verified by successful detection of S. typhimurium in egg samples with recoveries in the range of 92.4%–110%.
研究领域:
生物化学
·
纳米技术
·
分析化学
·
微生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Horticulturae
·
2024
·Vol. 10
·期 6
·587
·
IF 3.1
Jiangmei Hu,Junhuo Cai,Xinrui Hu,Lijun Wang,Qiangqiang Cheng,Xiuhua Tao
Turpinia argutais an excellent medicinal plant mainly used for the treatment of pharyngitis, tonsillitis, and tonsillar abscesses. However, an efficient regeneration protocol using tissue cultures forT. argutadoes not exist. Its main medicinal constituents are flavonoids, particularly ligustroflavone and rhoifolin. Here, we aimed to establish a tissue culture system forT. argutafor the first time using annual stem segments with axillary buds harvested from the field of the Jiangxi Academy of Forestry as explants by dynamically determining the accumulation of effective functional components in the tissue culture plantlets. Orthogonal tests were conducted to compare the effects of different explant disinfection times, media, and exogenous hormone ratios on the induction of the axillary bud growth, successional proliferation, and rooting ofT. argutastem segments. The best explant disinfection effect was achieved by disinfecting theT. argutaexplant with 75% ethanol for 50 s, followed by 0.1% mercuric chloride (HgCl2) for 6 min, and the optimal media for successional proliferation and rooting were Murashige and Skoog (MS) + 0.2 mg/L of 6-benzyladenine (6-BA), + 0.03 mg/L of naphthaleneacetic acid (NAA), and ½ MS + 2.5 mg/L of indole-3-butyric acid + 0.5 mg/L of NAA, respectively. The detection of ligustroflavone and rhoifolin in tissue culture plantlets 0, 3, and 5 months after transplanting showed a significant increasing trend and eventually exceeded the content requirements of the 2020 Edition ofChinese Pharmacopoeia forT. arguta. Our findings provide, for the first time, an effective tissue culture system forT. arguta, thereby providing important information to support the germplasm preservation, innovation, and application ofT. argutain the future.
研究领域:
药理学
·
植物生物技术
·
药用植物
·
组织培养
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MOLECULAR LIQUIDS
·
2024
·
IF 5.3
Tao Ge,Bingyi Zhou,Jingyao Xu,Yulu Wei
Ionic liquids (ILs) were selected and applied to investigate the best coal desulfurization through orthogonal tests. FTIR, XPS, SEM and contact angle tests were used to characterize the effect on the physical and chemical structures in coal for revealing the coal desulfurization mechanism by ILs-H 2 O 2 system. The orthogonal test results showed that reaction temperature and reaction time were the main influencing factors for the desulfurization rates of coal in the ILs-H 2 O 2 system, and the ILs synergy could effectively improve the desulfurization rates of H 2 O 2 . The maximum coal desulfurization rates of [BMIM][HSO 4 ], [BMIM][OTF], and [BMIM][BF 4 ] ionic liquids were 30.7%, 30%, and 33.2%, respectively. The results indicated that the alkyl groups in coal were oxidized and the contents of oxygen-containing functional groups such as hydroxyl and carbonyl increased. Coal surface underwent swelling, the internal pores increased and new pores and cracks were generated. The wettability of coal improved substantially. In addition, the physical structures changes in coal facilitated the contact between the extractant and the sulfur-containing structures. The contents of thiols and sulfides in coal significantly decreased and were oxidized to sulfoxides and sulfones, with some further oxidized to soluble sulfites or sulfates. Thus achieving removal from coal.
研究领域:
环境科学
·
化学工程
·
材料科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）