JOURNAL OF NUCLEAR MATERIALS
·
2024
·
IF 2.8
Jiaqi Li,N. Daghbouj,Xiaoxun He,Ke Chen,Xingzhong Cao,Shuoxue Jin,Jun Li,Haiyuan Wei,Junjun Zhou,Tongmin Zhang,Shuai Xu,Fangfang Ge,J. Duchoň,A.T. AlMotasem,T. Polcar,Bingsheng Li
Layered carbides and borides, blending ceramic and metallic characteristics, present compelling prospects for future nuclear reactor applications due to their complex nanolaminate crystal structure. To explore the behavior of Fe 2 AlB 2 under different conditions, helium irradiation is conducted across saturation fluences and under different annealing and irradiation temperatures. Room temperature (RT) irradiation causes some changes: a-lattice expands 0.3 %, c-lattice contracts 0.07 %, and an embedded amorphous layer into the matrix is formed. 400 °C annealing keeps an amorphous structure whereas 800 °C annealing fully recrystallizes with bubble growth. Increasing the irradiation temperature to 400 °C with the same fluence, smaller bubbles form without an amorphous layer, indicating defect recombination depends on helium attachment to vacancies. Under irradiation at 700 °C, faceted bubbles develop exclusively within Fe 2 AlB 2 , with no such bubbles in Al 2 O 3 . These faceted bubbles align themselves along (110) planes. Simultaneously, irradiation prompts tangled dislocations within the damaged layer, fostering the congregation of polygonal bubbles along grain boundaries (GBs) and creating denuded areas at GBs. Fe 2 AlB 2 demonstrates remarkable oxidation resistance under high-temperature irradiation, maintaining surface stability without the cracks seen in ion-irradiated Ti 3 SiC 2 and Ti 2 AlC at RT. Fe 2 AlB 2 shows promise for use in reactors operating at temperatures above 500 °C due to its resilience to irradiation. Further investigation is warranted for its application in reactors operating in environments exceeding this threshold temperature.
研究领域:
材料科学
·
核能工程
✓ 已验证
产品关联
DOI
高影响因子
Polymers
·
2020
·Vol. 12
·期 5
·1138
·
IF 3.426
Lixuan Wang,Shiyan Dong,Yutong Liu,Yifan Ma,Jingjing Zhang,Zhaogang Yang,Wen Jiang,Yuan Yuan
Injectable hydrogels have been widely applied in the field of regenerative medicine. However, current techniques for injectable hydrogels are facing a challenge when trying to generate a biomimetic, porous architecture that is well-acknowledged to facilitate cell behaviors. In this study, an injectable, interconnected, porous hyaluronic acid (HA) hydrogel based on an in-situ bubble self-generation and entrapment process was developed. Through an amide reaction between HA and cystamine dihydrochloride activated by EDC/NHS, CO2bubbles were generated and were subsequently entrapped inside the substrate due to a rapid gelation-induced retention effect. HA hydrogels with different molecular weights and concentrations were prepared and the effects of the hydrogel precursor solution’s concentration and viscosity on the properties of hydrogels were investigated. The results showed that HA10-10 (10 wt.%, MW 100,000 Da) and HA20-2.5 (2.5 wt.%, MW 200,000 Da) exhibited desirable gelation and obvious porous structure. Moreover, HA10-10 represented a high elastic modulus (32 kPa). According to the further in vitro and in vivo studies, all the hydrogels prepared in this study show favorable biocompatibility for desirable cell behaviors and mild host response. Overall, such an in-situ hydrogel with a self-forming bubble and entrapment strategy is believed to provide a robust and versatile platform to engineer injectable hydrogels for a variety of applications in tissue engineering, regenerative medicine, and personalized therapeutics.Keywords:injectable hydrogel;porous structure;in-situ bubble-forming hydrogel entrapment
研究领域:
材料科学
·
生物医学工程
·
再生医学
·
组织工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomaterials
·
2024
·Vol. 14
·期 20
·1629
·
IF 4.4
Penghui Lei,Qing Chang,Mingkun Xiao,Chao Ye,Pan Qi,Fangjie Shi,Yuhua Hang,Qianwu Li,Qing Peng
A new type of SiCf/TiC-Ti3SiC2composite was prepared by the Spark Plasma Sintering (SPS) method in this work. The phase transformation and interface cracking of this composite under ion irradiation (single Xe, Xe + He, and Xe + He + H ions) and subsequent annealing were analyzed using transmission electron microscopy (TEM), mainly focusing on the interface regions. Xe ion irradiation resulted in the formation of high-density stacking faults in the TiC coatings and the complete amorphization of SiC fibers. The implanted H ions exacerbated interface coarsening. After annealing at 900 °C for 2 h, the interface in the Xe + He + H ion-irradiated samples was seriously damaged, resulting in the formation of large bubbles and cracks. This damage occurred because the H atoms reduced the surface free energy, thereby promoting the nucleation and growth of bubbles. Due to the absorption effect of the SiCf/TiC interface on defects, the SiC fiber areas near the interface recovered back to the initial nano-polycrystalline structure after annealing.
研究领域:
材料科学
·
核材料
·
复合材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）