In this paper, we aimed to synthesize a water-soluble hyperbranched polyester with pentaerythritol and trimethylolpropane as branching centers and trimellitic anhydride as waterborne functional groups. The condition and principle of water-soluble hyperbranched resin synthesis were explored. The trimellitic anhydride was used to synthesize water-soluble hyperbranched resin at the most appropriate temperature of 160–170°C. The properties of the resin were characterized by FTIR, hydroxyl value, molecular weight, stability, viscosity, and then the relationship among them under different synthesis conditions was further studied. Results indicated that the water-soluble hyperbranched resin had no delamination for more than 6 months at a solid content higher than 60%. Moreover, the resin was mutual soluble with water at any proportion and kept clear and transparent at same time. After water-soluble hyperbranched resin mixing with amino resin in a ratio of 2.5:1, and curing at 130–135°C for 2 hours, the chemical and mechanical properties of the coating were further measured and characterized.
In this paper, a series of self-crosslinking waterborne polyurethane (WPU) dispersions with side chain, which is (3-(2-Aminoethyl)aminopropyl)trimethoxysilane (AEAPTMS) as the diamine chain extender, were prepared. The characteristics of WPU with different dosages of AEAPTMS were evaluated, including particle size, crystallinity, surface performance, water resistance and thermal stability. It was demonstrated that AEAPTMS was successfully incorporated into the WPU from Fourier-transform infrared spectroscopy (FT-IR). Once the content of AEAPTMS increased to 5 %, the WPU dispersions became gelatinous. That is, the siloxane groups were hydrolyzed into a cross-linked structure during the emulsification process. The particle size enlarged with the increasing dosage of AEAPTMS in transmission electron microscopy (TEM). The X-ray photoelectron spectroscopy showed that the silane in the cross-linked WPU migrated freely towards the WPU film surface. The addition of AEAPTMS enhanced the tensile strength, hydrophobicity, water resistance and thermal stability of WPU film. Meanwhile, the elongation at break and crystallinity of WPU films were declined. Besides, interestingly, the glass transition temperature of WPU films followed the trend of first rising and then falling. By adding wetting agent, antifoaming agent, adhesion promoter and flatting agent into WPU, the water-based varnish was prepared. The pencil hardness, water resistance, adhesion and anti-adhesion of water-based varnish were best in the application on the stainless steel substrate when the WPU sample was Si-WPU-3.
危险品化学品经营许可证（带存储）