Efficient Recovery of Cu from Wasted CPU Sockets by Slurry Electrolysis
In order to maximize the reuse of used electronic component resources, while reducing environmental pollution, Cu metal was recycled from wasted CPU sockets by the reformative slurry electrolysis method. However, the influences on the regulation of the Cu recovery rate and purity from waste CPU slots, by slurry electrolysis, has not been systematically elucidated in previous studies. In this work, the effects of H2SO4concentration, slurry density, NH4Cl concentration, current density, and reaction time, on the recovery rate and purity of Cu in slurry electrolysis, were researched by systematic experimental methods. The results showed that the recycled metal elements were mainly present as powders from the cathode, rather than in the electrolyte. Moreover, the metallic elements in the cathode powder consisted of mostly Cu and small amounts of Sn and Ni. The recovery rate and purity of Cu were up to 96.19% and 93.72%, respectively, with the optimum conditions being: an H2SO4concentration of 2 mol/L, slurry density of 30 g/L, NH4Cl concentration of 90 g/L, current density of 80 mA/cm2, and reaction time of 7 h. Compared with previous studies, the Cu recovered in this experiment was present in the cathode powder, which was more convenient for the subsequent processing. Meanwhile, the recovery rate of Cu was effectively improved. This is an important guideline for the subsequent application of slurry electrolysis for Cu recovery.Keywords:wasted CPU socket;slurry electrolysis;recovery rate of Cu;purity of Cu;current density;slurry density
危险品化学品经营许可证（带存储）