JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2023
·
IF 6.1
Yu-Bin Bai,Meng Zhang,Ding Li,Yu Zhao,Liang-Zhu Huang,Jin-Ming Gao
Natural products are important sources for the discovery of new pesticides. Chemical synthesis and structural modification can lead to pesticides. Despite abundant research in fungicide discovery for crop protection, there is an emerging need for the development of novel antifungal agrochemicals. Herein, 39 diversified griseofulvin derivatives were effectively synthesized from the natural product griseofulvin by diversity-oriented synthesis through the reactions of demethylation, ammonolysis, methylation, nitration, acylation, reduction, and chlorination. Among them, 31 derivatives were novel. All structures were characterized by 1H NMR, 13C NMR, and high-resolution mass spectrometry (HR-MS), and the antifungal activity was investigated against five phytopathogenic fungi. Compounds 5h and 5l had excellent activity against Botrytis cinerea (5h, IC50 = 17.29 ± 0.64 μg/mL) and Alternaria solani (5l, IC50 = 22.52 ± 0.79 μg/mL), respectively. Compound 9 exhibited the more promising activities against three target fungi, especially against Colletotrichum gloeosporioides (IC50 = 7.24 ± 0.66 μg/mL), which is obviously better than positive control hymexazol, thifluzamide, and parent compound griseofulvin. In addition, compound 10 showed significant and extensive activities against four target fungi Cytospora sp. (IC50 = 18.72 ± 0.35 μg/mL), C. gloeosporioides (IC50 = 31.39 ± 1.48 μg/mL), A. solani (IC50 = 40.82 ± 1.04 μg/mL), and Fusarium solani (IC50 = 36.81 ± 0.82 μg/mL). Unexpectedly, 11 and 12, the chlorinated products of compound 9, exhibited the most promising activity against C. gloeosporioides (IC50 = 4.48 ± 0.54 μg/mL for 11, 2.24 ± 0.76 μg/mL for 12). Furthermore, 12 showed remarkable activity against Cytospora sp. (IC50 = 5.85 ± 0.72 μg/mL). Additionally, in vivo antifungal activity against C. gloeosporioides, homology modeling, and docking analysis of 11, 12, and griseofulvin were conducted. All results indicated that 11 and 12 had potency as antifungal agents against C. gloeosporioides, and the modifications of the 2′ and 4′ positions of griseofulvin should be further explored for higher-activity lead compounds or potential agricultural fungicides.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
AAPS PHARMSCITECH
·
2022
·Vol. 23
·期 6
·1-16
·
IF 4.026
Ma Lin,Guo Song,Piao Jingshu,Piao Mingguan
Griseofulvin (GF) is used as an antifungal to treat superficial skin fungal infections such as tinea capitis and tinea pedis. Currently, GF is only available in traditional oral dosage forms and suffers from poor and highly variable bioavailability, hepatotoxicity, and long duration of treatment. Therefore, the main objective of this study was to reduce the side effects of the drug and to increase the concentration of the drug retained in the cutaneous stratum corneum (SC) and improve its efficacy through the preparation of drug-laden GF microsponge (GFMS). The emulsification-solvent-diffusion method was used to prepare GFMS, and the prescriptions were screened by a single-factor approach. The optimized formulation (GFF8) had a microsponge particle size (μm) of 28.36 ± 0.26, an encapsulation efficiency (%) of 87.53 ± 1.07, a yield (%) of 86.58 ± 0.42, and drug release (%) from 77.57 ± 3.88. The optimized microsponge formulation was then loaded into a Carbopol 934 gel matrix and skin retention differences between the microsponge gel formulation and normal gels were examined by performing skin retention and fluorescence microscopy tests. Finally, the hepatoprotective and cutaneous stratum corneum retention abilities of microsponge gel formulations compared to oral GF formulations were assessed by hepatotoxicity, pharmacokinetics, and tissue distribution studies. This provides a new perspective on GF dermal stratum corneum retention administration. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Chinese Journal of Chromatography
·
2022
·Vol. 40
·期 5
·433-442
·
IF 0
Yangjie LI,Jiaying HUANG,Jihui FANG,Zhiye HUANG
A high throughput screening method based on ultra performance liquid chromatography-quadrupole-time-of-flight high resolution mass spectrometry (UPLC-Q-TOF HRMS) was developed for the simultaneous and rapid confirmation of 73 prohibited compounds in cosmetics. The sample was dispersed in a saturated sodium chloride solution and ultrasonically extracted using acetonitrile containing 0.2% (v/v) formic acid. The resultant solution was centrifuged and then cleaned using dispersive solid phase extraction using a primary secondary amine (PSA) sorbent. The purified solution was centrifuged, and the supernatant was filtered through a 0.22 μm membrane before determination. The optimal pretreatment method was determined by comparing the recovery rates obtained using different extraction solvents and different amounts of purifying agents. The chromatographic separation conditions and mass spectrometry scanning mode were also optimized. Chromatographic separation was performed on an Acquity UPLC HSS T3 column (100 mm×2.1 mm, 1.8 μm) with gradient elution using 0.1% (v/v) formic acid aqueous solution and methanol as mobile phases. The eluent from the column was further detected using Q-TOF HRMS with the high resolution multiple reaction monitoring (MRM HR) scanning mode. Retention time, precise mass of parent ion, isotope abundance ratio, and precise mass of fragment ions were the parameters considered for rapid untargeted screening and confirmation. The matrix effects of water- and cream-based cosmetics were investigated. The matrix effects could be addressed using the matrix matched standard curve method. The correlation coefficients for the 73 prohibited compounds were all >0.99 in the corresponding linear concentration range. The limits of detection (LODs) were in the range of 5-150 μg/kg, and the limits of quantification (LOQs) were in the range of 15-450 μg/kg. Average recoveries were in the range of 60.3%-130.3% at three spiked levels, and the intra-day and inter-day precisions were 0.8%-10.0% ( n =6) and 1.1%-15.0% ( n =3), respectively. A total of 692 cosmetics samples were screened; 16 positive samples were detected, namely, sulfamethoxazole, meprednisone, lincomycin, 4-acetamidophenol, trimethoprim, alfacalcidol, betamethasone 17-valerate, brimonidine, chloramphenicol, chlorpheniramine, clobetasol propionate, crotamiton, econazole, ketoconazole, prednisone 21-acetate, and prednisone, with content in the range of 0.5-1136.1 mg/kg. The optimized method is accurate, fast, and simple, and it is suitable for the routine detection and rapid screening of common prohibited compounds in cosmetics. In addition, a screening and confirmation library was established for the 650 prohibited compounds using SCIEX OS and Library View software, using information-dependent acquisition (IDA)-MS/MS mode for MS data acquisition. The database contains multiple types of information, including formulas, theoretical exact mass, retention time, precise mass of parent ion, isotope abundance ratio, and fragment ion distribution. The library can be used for the simultaneous and rapid confirmation of prohibited compounds in cosmetics.
✓ 已验证
产品关联
DOI
PubMed
JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES
·
2020
·
IF 3.004
Kamran Bashir,Guoning Chen,Jili Han,Hua Shu,Xia Cui,Lu Wang,Wen Li,Qiang Fu
Fluconazole and voriconazole are the two broad-spectrum triazole antifungals. The present work described the fabrication method for the synthesis of the amino-modified magnetic metal–organic framework. This material was applied as a pre-sample treatment sorbent for the selective extraction of fluconazole and voriconazole in rat plasma samples. The material was fabricated by the chemical bonding approach method and was characterized by different parameters. The factors which affect the extraction efficiency of the sorbent material were also optimized in this study. Due to the optimization of solid-phase extraction conditions, the nonspecific interaction was reduced and the extraction recoveries of target drugs were increased in plasma samples. The extraction method was combined with the HPLC-UV method for the analysis. Excellent linearity (0.1–25 µg/mL), detections (0.02, 0.03 µg/mL) and quantification limits (0.04, 0.05 µg/mL) were resulted for fluconazole and voriconazole respectively. The maximum recoveries from spiked plasma samples of fluconazole and voriconazole were 86.8% and 78.6% and relative standard deviation were 0.9–2.8% and 2.2–3.6% respectively. Moreover, this sorbent material was used multiple times which was an improvement over single-use commercial sorbent materials. This validated method has practical potential for the simultaneous determination of these drugs in therapeutic drug monitoring studies as well as for routine pharmacokinetic evaluations.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY
·
2019
·
IF 3.571
Yu-Bin Bai,Yu-Qi Gao,Xiao-Di Nie,Thi-Mai-Luong Tuong,Ding Li,Jin-Ming Gao
With environmental pollution, residual hazards accumulate and severe drug resistance and many other problems appear; some highly toxic drugs have been banned, and antifungal agents are far from satisfactory. Natural products play an important role in the discovery and development of new pesticides. The natural product griseofulvin (1) has been known as an antifungal agent in the treatment of dermatomycoses for decades. In this study, a series of new griseofulvin derivatives were synthesized with good yields. Their structures were characterized by 1H and 13C nuclear magnetic resonance and high-resolution mass spectrometry (electrospray ionization). The antifungal activities of griseofulvin analogues were first evaluated against five phytopathogenic fungi (Cytospora sp., Colletotrichum gloeosporioides, Botrytis cinerea, Alternaria solani, and Fusarium solani) in vitro. Of significance is that most of them showed excellent antifungal activities against C. gloeosporioides. The antifungal activities of the four best compounds (6a, 6c, 6e, and 6f) against C. gloeosporioides were further investigated in vivo using infected apples. The results suggested that compounds 6c, 6e, and 6f [half-maximal inhibitory concentration (IC50) = 47.25 ± 1.46, 49.44 ± 1.50, and 53.63 ± 1.74 μg/mL, respectively] were better than thiophanate-methyl (IC50 = 69.66 ± 6.07 μg/mL). Furthermore, comparative molecular field analysis was performed on the basis of the antifungal activity results of all 22 of the compounds against C. gloeosporioidesin vitro. The three-dimensional coefficient contour plots revealed that the suitable bulky and electronegative acyl-substituted groups seem to be more favorable for increasing activity at the 4′ position of griseofulvin. The structure–activity relationships were also discussed. Griseofulvin derivatives can be used for the development of highly effective and safe agricultural fungicides.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MYCOSES
·
2018
·Vol. 62
·期 5
·466-474
·
IF 2.793
Yangmin Gao,Ping Zhan,Ferry Hagen,Steph B. J. Menken,Jiufeng Sun,Ali Rezaei-Matehkolaei,Sybren de Hoog
Summary Trichophyton schoenleinii is an anthropophilic dermatophyte usually causing tinea favosa. Only few studies have provided data on molecular epidemiology and antifungal profiles of this fungus due to its limited prevalence after 1950s. Forty-nine strains from Asia (n = 27), Africa (n = 10), Europe (n = 10) and from unknown regions (n = 2) were analysed with amplified fragment length polymorphism fingerprinting (AFLP) to reveal intraspecific genetic diversity in this dataset. Amplified fragment length polymorphism fingerprinting genotyping revealed five clusters which did not correspond to geographic origins or clinical characteristics. Additionally, in vitro antifungal susceptibility to seven antifungals was provided for all strains. Terbinafine, ketoconazole, miconazole and itraconazole proved to be the most effective drugs, followed by griseofulvin. No correlation between genotypes and differences in antifungal susceptibility was observed. It is concluded that the AFLP groups are lineages within a single species.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2018
·
IF 5.08
Yue-Hong Yang,Lan-Tao Liu,Mei-Jun Chen,Song Liu,Cheng-Bin Gong,Yu-Bo Wei,Cheuk-Fai Chow,Qian Tang
A new photoresponsive surface molecularly imprinted polymer shell (PMIPS) was developed for determination of trace griseofulvin from milk. The PMIPS was prepared by surface imprinting technique using poly(styrene- co -methacrylic acid) (PS- co -PMMA) microspheres as the sacrificial substrate, griseofulvin as the template, a photoresponsive azobenzene derivative 4-((4-(methacryloyloxy)phenyl)diazenyl)-3,5-dimethyl benzenesulfonic acid as the functional monomer, and triethanolamine trimethacrylate as the cross-linker. The PMIPS was obtained after the removal of the sacrificial PS- co -PMMA core from the surface imprinted core-shell microspheres, PS- co -PMAA@PMIP. Compared with PS- co -PMAA@PMIP, PMIPS displayed better properties such as higher surface area and pore volume, rapid photo-isomerization rate, and higher adsorption capacities, specific binding constant and binding density. The PMIPS could efficiently detect griseofulvin in complex samples such as milk.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CRYSTAL GROWTH & DESIGN
·
2024
·
IF 3.2
Shengzheng Guo,Yuechao Cao,Yuxin Zhang,Yan Wang,Zhenguo Gao,Junbo Gong
Inhaled drug delivery has garnered increasing attention due to its inherent advantages including rapid onset of action, targeted delivery, high bioavailability, and reduced side effects, which holds promise for the treatment of localized lung diseases and systemic diseases. The currently dominant technologies for the preparation of inhalants are air flow pulverization, media milling, and spray drying, which encounter challenges such as inaccurate particle size control, inefficiency, instability, and difficulties in scaling up. The present study proposes a freeze-dissolving technique (FDT) for the preparation of inhalable microcrystals, comprising two essential steps: rapid freezing of microdroplets into iced pellets within seconds and subsequent dissolution of a solvent in the iced pellets to release the microcrystals in a suspension. By employing the FDT technique, griseofulvin, a representative inhalant, was successfully engineered into a bipyramidal morphology with a targeted particle size (<5 μm), minimal agglomeration (<3%), and an aspect ratio below 2, in which the solvent and stabilizer systems played pivotal roles in facilitating or impeding nucleation and crystal growth processes. To verify the universality of the FDT, six other typical inhalant preparation processes were successfully developed based on the FDT with a controllable crystal size between 1 and 10 μm. Furthermore, three out of the aforementioned seven model substances were randomly selected, and their preparation was scaled up by a factor of 100, yielding consistent results with those obtained at a smaller test scale. This study outlines the freeze-dissolving mechanism in ultrafine crystal formation and demonstrates that the FDT is a robust and scalable approach for the production of inhalants.
✓ 已验证
产品关联
DOI
高影响因子
PHARMACEUTICAL RESEARCH
·
2025
·
IF 4.3
Lu Tianshu,Wu Yiyang,Xiong Ping,Zhong Hao,Ding Yang,Li Haifeng,Ouyang Defang
Objective Amorphous solid dispersion (ASD) is widely utilized to enhance the solubility and bioavailability of water-insoluble drugs. However, conventional experimental approaches for ASD development are often resource-intensive and time-consuming. Machine learning (ML) algorithms have great potential to predict ASD formulations but face the challenge of extensive data to construct reliable models. Current study aims to predict the formation of both binary and ternary ASD by combined high-throughput screening (HTS) and ML approaches. Methods Micro-quantity HTS was conducted to generate 1272 binary and ternary solid dispersions using solvent evaporation method. The Powder X-Ray Diffraction (PXRD) was used to characterize the amorphous state of formulations. The results indicated that 188 formulations successfully formed amorphous solid dispersions (ASDs), while 1084 resulted in crystalline formations. Models development employed nested cross-validation with four algorithms: Light Gradient Boosting Machine (LGBM), Random Forest (RF), Support Vector Machine (SVM), and Multi-Layer Perceptron (MLP). Results The RF model for ASD formation achieved 96.7% accuracy on the in-house HTS dataset, with a precision of approximately 87.9% and an F1 score of 83.6%. Furthermore, the RF model trained with milligram-scale HTS experimental data could effectively predict the large-scale ASD formulations from the literature, highlighting its promise as a powerful tool for advancing ASD prediction. Conclusion In summary, the combination of HTS experiments and ML techniques provides a valuable reference framework for ASD development, greatly minimizing both time and material usage in the selection of formulations during the early stages of drug discovery with a limited quantity of API. Graphical The workflow of this study involves a micro-quantity HTS experiment that generated over a thousand homogeneous data points for ML model development. The RF model demonstrated strong performance on a large-scale external dataset for ASD prediction, significantly saving time and material usage in formulation development, particularly during early drug discovery.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）