HIGH PERFORMANCE POLYMERS
·
2016
·
IF 1.045
Fengyi Wang,Zhixiong Huang,Guangwu Zhang,Yunxia Li
This work reports a boron- and silicon-containing phenolic-formaldehyde (PF) resin exhibiting an extremely high thermal decomposition temperature and char yield and formed by copolymerizing phenol, formaldehyde, boric acid (BA), and phenyltriethoxysilane (PTES). The structure of BA and PTES-modified PF (BSPF) resin was characterized by Fourier transform infrared spectroscopy. Thermal stability of the investigated composites was estimated by means of thermogravimetric analysis (TGA). The results of TGA indicated that the modified resin exhibited excellent thermal stability. Specifically, the thermoset had a char yield of 77.0% when the boron and silicon contents were only 1.27 wt% and 1.7 wt%, respectively. Compared with the unmodified resin (PF), the temperature at the maximum decomposing rate of the BSPF increased by 84°C and its charring yield was enhanced by 15.0%. The cured products of PF and BSPF were further investigated by X-ray diffraction and Raman spectroscopy, respectively. The incorporation of boron and silicon into the carbon lattice results in a decrease of interlayer spacing, and Raman ID/IG values for PF and BSPF (2.63 and 1.32) show that the rearrangement of crystalline structure leads to an increase in graphite structure and a decrease in disordered structure upon the modification processes.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Chenyu Wang,Biao Gui,Chaoyue Wu,Chao He,Lucheng Li,Xiaolong Ling,Xiaojun Zuo
Hydrothermal carbonization (HTC) is a promising technology for sewage sludge (SSL) utilization. However, the yield and performance of hydrochar need to be further improved produced when SSL is used as a feedstock must be improved further. Herein, a process combining physicochemical pretreatment , namely, Fenton oxidation (FO) and HTC was developed for SSL utilization. Moderate oxidation was found to improve the yield and performance of the produced hydrochar. The product distribution, yield, and properties of the hydrochar produced using the proposed combined process were compared with those of the hydrochar produced via direct HTC treatment. The pretreatment affected the surface structure and organic composition of SSL and promoted the carbonization of the intermediate products. Thus, compared with the yield of hydrochar (50.7 %) obtained via the direct HTC treatment, the yield of the hydrochar obtained using the combined process increased to 55.0–65.2 % (depending on the pretreatment condition). Hydrochar properties were enhanced using the combined process, and the energy density of hydrochar slightly decreased after pretreatment (1.2–13.1 %); however, the energy yields increased by 0.6–30.1 % due to the enhanced hydrochar yield. The carbonization degree of hydrochar improved, the carbon in the feedstock distributed to the hydrochar increased from 33.40 % to 46.09 %. Moreover, the hydrochar showed more distinct pore channels, slightly improving its combustion activity. This study shows the efficacy of the combined pretreatment–HTC process and provides an experimental basis for the combined hydrothermal treatment of SSL.
研究领域:
环境科学
·
能源工程
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Shutong Fan,Xun Gao,Xi Yang,Xianjun Li
To be suitable for certain construction and furniture applications, wood must be treated with a flame retardant and impregnating flame retardants into the cellulose lumens of wood is an effective flame retardant method. Phytic acid , the main storage form of phosphorus in various plant tissues, is an inexpensive, and non-toxic biomaterial that shows potential applications as an environmentally friendly bio-based flame retardant. In this study, phytic acid and zinc phytate were used to impregnate delignified wood under vacuum and pressure, which greatly enhanced the flame retardancy and smoke suppression properties of Chinese fir , while still maintaining its original texture. Phytic acid and zinc phytate were hydrogen-bonded to cellulose in wood. Phytic acid and zinc phytate were hydrogen-bonded to cellulose in wood. The results showed that the total heat release (THR) of Chinese fir treated with zinc phytate decreased from 55.66 MJ/m 2 to 5.90 MJ/m 2 , and a compact carbonized protective layer was quickly formed on the surface of Chinese fir after ignition. Thermogravimetric analysis (TGA) showed that the char yield of Chinese fir treated by the flame retardant was 177.6 % higher than that of untreated wood. This study provides an efficient, sustainable, and economical method to prepare Chinese fir with excellent flame retardancy and thermal insulation performance.
研究领域:
材料科学
·
消防安全工程
·
可持续化学
·
木材科学与技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMER DEGRADATION AND STABILITY
·
2016
·
IF 3.12
Shuang Yang,Qiaoxin Zhang,Yefa Hu
A novel halogen-free flame retardant (DTB) containing phosphorus, nitrogen and boron was successfully synthesized. The chemical structure of DTB was characterized by Fourier transform infrared spectroscopy (FTIR), 1 H and 31 P nuclear magnetic resonance (NMR). DTB was then blended with diglycidyl ether of bisphenol-A (DGEBA) to prepare flame-retardant epoxy resins . Thermal properties, flame retardancy and combustion behavior of the cured EP thermosets were investigated by thermogravimetric analysis (TGA), limited oxygen index (LOI) measurement, UL94 vertical burning test and cone calorimeter test. The results indicated that DTB significantly improved the flame retardancy as well as smoke inhibition performance of EP/DTB thermosets. Compared with the neat EP thermoset, the LOI of EP/DTB-3 thermoset was increased to 35.6% and the sample reached UL94 V-0 rating; the average of heat release rate (av-HRR), total heat release (THR) and total smoke production (TSP) of EP/DTB-3 thermoset were decreased by 33.3%, 33.0% and 35.5%, respectively. TGA results indicated that the char yields of EP/DTB thermosets were increased by 45.1–72.8% compared with that of the neat EP thermoset. The FTIR, SEM-EDX and Py-GC/MS results indicated that DTB contributed to form intumescent and glassy char layers and decomposed to generate free radicals with quenching effect. DTB was effective radical trapper as well as efficient charring agent for epoxy resin and exerted flame-retardant effect in gaseous and condensed phases simultaneously.
研究领域:
材料科学
·
高分子化学
·
消防安全工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）