A single-mode-fiber (SMF)-multimode-fiber (MMF)-tri-core-fiber (TCF) Michelson probe structure is proposed for trace detection of canine distemper virus (CDV). One end of the TCF is cut flat and fused with the multimode fiber, and the other end is coated with a silver film to enhance the reflection, and an optic-fiber sensing probe with SMF-MMF-TCF structure is obtained. The (PDDA/PSS) 3 multilayer film is modified on the surface of the fiber by layer-by-layer self-assembly method as a polyelectrolyte binder to immobilize CDV antibodies to form a (PDDA/PSS) 3 /CDV antibody composite membrane for specific detection of CDV antigens. The response-recovery test of the sensor is performed to verify its repeatability. The detection limit, the sensitivity, and the linear fitting degree for CDV antigen are 0.1236 pg/mL, 1.1776 dB/(pg/mL), and 0.9899, respectively. At the same time, the stability, selectivity, and clinical samples of the sensors were also verified.
A surface-functionalized cascaded optic-fiber Mach–Zehnder interferometer (MZI) is proposed and fabricated for trace detection of canine distemper virus (CDV). The Vernier effect is formed based on single-mode fiber (SMF)-dislocation single-mode fiber-SMF. The two MZIs serve as the sensing arm and reference arm, respectively. The CDV antibody is modified on the sensing arm to detect CDV antigen, and the surface structure and morphology are analyzed by the atomic force microscope. The sensitivity of the cascaded MZI sensor is about 12 times than that of a single MZI. In the range of 0.1–104 pg ml−1 CDV, the detection limit of the cascaded MZI sensor is 0.1687 pg ml−1, and the response time is 25 min. The sensor also has good temperature, time stability and excellent selectivity. The biosensor has the advantages of low cost, easy preparation, high sensitivity and good selectivity, and has potential application for trace CDV detection.