SOLID STATE IONICS
·
2014
·
IF 2.112
Jing Yang,Zhen Huang,Bingxin Huang,Jing Zhou,Xiaoxiong Xu
NASICON-type structure lithium ion conductors have been considered as promising solid electrolytes due to its very high Li + -ion conductivity and chemical stability. In this paper, NASICON-type structured Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 (LAGP) glass–ceramics are prepared from crystallization of glass powders, which are obtained by a simple melt-quench method. NH 4 H 2 PO 4 , H 3 PO 4 , P 2 O 5 and H 3 PO 4 &Al(PO 3 ) 3 are used as phosphorus sources, respectively. The obtained LAGP glass–ceramics are systematically characterized with X-ray diffraction, field emission scanning electron microscopy , differential scanning calorimetry and AC impedance spectroscopy . The different impurities are formed depending on the phosphorus sources, which further influence the microstructure. As a result, the lithium ion conductivity is significantly affected by the phosphorus sources. The highest conductivity of 5.21 × 10 − 4 S·cm − 1 is obtained when H 3 PO 4 is used as the phosphorus source under optimum conditions.
研究领域:
材料科学
·
固态离子学
·
无机非金属材料
·
能源材料
·
电化学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2024
·Vol. 50
·期 15
·26493-26502
·
IF 5.1
Lan Zhang,Meihui Xiao,Jiali Li,Lin Chen,Jun Sun,Jianjun Ding,Xiaoxiao Li,Yi Gong,Kang Zheng,Xian Zhang,Xingyou Tian
The Bi 2 O 3 –B 2 O 3 –SiO 2 –ZnO–Al 2 O 3 (BBSZA) glass/Al 2 O 3 composites are prepared by quenching and quenching-free methods and conducted a comparative analysis of their microstructures and properties. The results reveal that the BBSZA/Al 2 O 3 composite obtained by quenching free method has smaller pores and superior performance. Specifically, at a BBSZA content of 50 wt%, the composite exhibits a thermal conductivity of 5.352 W/m·K and a flexural strength of 193.54 MPa, which are 1.38 times and 2.08 times those obtained using the quenching method, respectively. XRD and TEM analyses , along with parallel experiments using other glasses, suggest that presintering crystallization may be the prerequisite for achieving denser composites via the quenching-free method. BBSZA glass reacts with Al 2 O 3 at the presintering process to generate a great amount of ZnAl 2 O 4 crystals, which enhances grain boundary energy and increases sintering density. This work provides insights into the low-cost and high-performance development of low temperature co-fired ceramics (LTCC).
研究领域:
材料科学
·
无机非金属材料
·
陶瓷学
·
复合材料工程
·
电子封装材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2020
·Vol. 46
·期 13
·21560-21568
·
IF 3.83
Mingcai Li,Xuejie Zhang,Yinjian Zheng,Yaliang Xu,Haoran Zhang,Yingliang Liu,Bingfu Lei
The discovery of light converter excited by near-ultraviolet (UV) superior broadband blue-emitting lighting source is a main challenge in plant growth LEDs. In this study, SrLu 2 O 4 :Ce 3+ , Li + , F − blue phosphor has been synthesized via a solid-state reaction. Benefitting from doping of F − ions, SrLu 2 O 4 :Ce 3+ , Li + , F − phosphor (λ ex = 405 nm, λ em = 460 nm) shows a strong broadband (FWHM = 90 nm) blue-emitting with lower critical concentration of Ce 3+ ions and an increasing 6.9% thermal quenching performance (92.1% @ 423 K of the peak intensity at room temperature). Moreover, a blue light converter composed of SrLu 2 O 4 :Ce 3+ , Li + , F − phosphor and glass matrix is obtained based on phosphor-in-glass (PiG) technology, exhibiting excellent thermal stability and outstanding moisture resistance . A red light converter with commercial red phosphor is obtained by the same method. Furthermore, by combining of two light converters with near-UV chip, a proof-of-concept plant growth high power LED is achieved and applied in indoor Italian lettuce growing in comparison with commercial plant lamps.
研究领域:
材料科学
·
光学工程
·
农业光电子学
·
固体发光
·
无机非金属材料
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2018
·
IF 6.945
Dongjiu Xie,Shaojie Chen,Zhihua Zhang,Jie Ren,Lili Yao,Linbin Wu,Xiayin Yao,Xiaoxiong Xu
The combination of high conductivity and good stability against Li is not easy to achieve for solid electrolytes , hindering the development of high energy solid-state batteries . In this study, doped electrolytes of Li 3 P 1- x Sb x S 4-2.5 x O 2.5 x are successfully prepared via the high energy ball milling and subsequent heat treatment . Plenty of techniques like XRD , Raman, SEM, EDS and TEM are utilized to characterize the crystal structures, particle sizes, and morphologies of the glass-ceramic electrolytes. Among them, the Li 3 P 0.98 Sb 0.02 S 3.95 O 0.05 ( x = 0.02) exhibits the highest ionic conductivity (∼1.08 mS cm −1 ) at room temperature with an excellent stability against lithium. In addition, all-solid-state lithium batteries are assembled with LiCoO 2 as cathode, Li 10 GeP 2 S 12 /Li 3 P 0.98 Sb 0.02 S 3.95 O 0.05 as the bi-layer electrolyte, and lithium as anode. The constructed solid-state batteries delivers a high initial discharge capacity of 133 mAh g −1 at 0.1C in the range of 3.0–4.3 V vs. Li/Li + at room temperature, and shows a capacity retention of 78.6% after 50 cycles. Most importantly, the all-solid-state lithium batteries with the Li 10 GeP 2 S 12 /Li 3 P 0.98 Sb 0.02 S 3.95 O 0.05 electrolyte can be workable even at −10 °C. This study provides a promising electrolyte with the improved conductivity and stability against Li for the application of all-solid-state lithium batteries.
研究领域:
材料科学
·
电化学
·
固态电池
·
能源存储
·
无机非金属材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）