JOURNAL OF ALLOYS AND COMPOUNDS
·
2024
·
IF 5.8
Peng Hou,Ke Chen,Xudong Wang,Xiaofei Hu,Bing Li,Ming Liu,Xiao (Matthew) Hu,Yujie Song
The rapid development of high-performance materials has garnered considerable attention in addressing electromagnetic pollution . The construction of core-shell heterostructures is an effective approach for regulating the electromagnetic parameters of absorbers. However, these heterostructures usually lack a direct channel for charge transport between the core phase and the adhesive shell phase. Herein, Fe 2 AlB 2 @FeAl-layered double hydroxides with core-shell heterostructures were prepared using a top-down approach. The tightly connected FeAl-LDHs nanosheets to the Fe 2 AlB 2 parent phase improved electronic transport. Compared with raw Fe 2 AlB 2 , the spherical absorber with an embroidered structure demonstrated stronger reflection loss (-15.6 dB for Fe 2 AlB 2 , −58.6 dB for Fe 2 AlB 2 @FeAl-LDHs) and a broader effective absorption bandwidth (2.2 GHz for Fe 2 AlB 2 , 3.6 GHz for Fe 2 AlB 2 @FeAl-LDHs) due to the enhanced dielectric and magnetic losses. This study presents a practical method for designing new controllable core-shell heterostructures for electromagnetic wave-absorbing materials.
研究领域:
材料科学
·
电磁学
·
纳米材料
·
功能材料
·
复合材料
✓ 已验证
DOI
高影响因子
Solar RRL
·
2023
·Vol. 8
·期 4
·2300926
·
IF 7.9
Qiuju Liu,Yang Liu,Hu Liu,Qingyong Tian,Bin Fan,Hua Bai
Room-temperature-processed (RTP) electron-transport layer (ETL) is a prerequisite for fabricating fully RTP perovskite solar cells (PSCs). Herein, an RTP-Zn 2 SnO 4 (ZSO) ETL is deposited for achieving RTP-PSCs by magnetron sputtering using ZnO and SnO 2 targets. The ZSO ETL exhibits great electrical properties, better band alignment, and yields increased grain size of the perovskite grown on it, thus facilitating electron extraction from the perovskite layer to the ETL. As a result, a champion power conversion efficiency of 21.06% is achieved in the ZSO-based device, which is the highest value for RTP-PSCs. The ZSO-based PSCs also exhibit high device stability. Moreover, the efficiency of a large-area perovskite module based on ZSO ETL reaches 17.79%.
研究领域:
材料科学
·
光伏技术
·
纳米材料
·
半导体物理
·
能源材料
✓ 已验证
DOI
高影响因子
Frontiers of Optoelectronics
·
2019
·Vol. 11
·期 4
·348-359
·
IF 0
Liu Jikang,Li Junli,Tu Guoli
The electron transport layer (ETL) plays a crucial role on the electron injection and extraction, resulting in balanced charge transporting and reducing the interfacial energy barrier. The interface compatibility and electrical contact via employing appropriate buffer layer at the surface of hydrophobic organic active layer and hydrophilic inorganic electrode are also essential for charge collections. Herein, an ether chain functionalized fullerene derivatives [6,6]-phenyl-C 61 -butyricacid-(3,5-bis(2-(2-ethoxyethoxy)-ethoxy)-phenyl)-methyl ester (C 60 -2EPM) was developed to modify zinc oxide (ZnO) in inverted structure organic solar cells (OSCs). The composited ZnO/C 60 -2EPM interface layer can help to overcome the low interface compatibility between ZnO and organic active layer. By introducing the C 60 -2EPM layer, the composited fullerene derivatives tune energy alignment and accelerated the electronic transfer, leading to increased photocurrent and power conversion efficiency (PCE) in the inverted OSCs. The PCE based on PTB7-Th: PC 71 BM was enhance from 8.11% on bare ZnO to 8.38% and 8.65% with increasing concentrations of 2.0 and 4.0 mg/mL, respectively. The fullerene derivatives C 60 -2EPM was also used as a third compound in P3HT:PC 61 BM blend to form ternary system, the devices with addition of C 60 -2EPM exhibited better values than the control device.
研究领域:
材料科学
·
光电化学
✓ 已验证
产品关联
DOI
JOURNAL OF POWER SOURCES
·
2017
·
IF 6.395
Zongbao Zhang,Yang Zhou,Yangyang Cai,Hui Liu,Qiqi Qin,Xubing Lu,Xingsen Gao,Lingling Shui,Sujuan Wu,Jun-Ming Liu
Planar perovskite solar cells (PSCs) based on CH 3 NH 3 PbI 3- x (SCN) x (SCN: thiocyanate) active layer and low-temperature processed TiO 2 films are fabricated by a sequential two-step method in ambient air. Here, alkali thiocyanates (NaSCN, KSCN) are added into Pb(SCN) 2 precursor to improve the microstructure of CH 3 NH 3 PbI 3- x (SCN) x perovskite layers and performance of the as-prepared PSCs. At the optimum concentrations of alkali thiocyanates as additives, the as-prepared NaSCN-modified and KSCN-modified PSCs demonstrate the efficiencies of 16.59% and 15.63% respectively, being much higher than 12.73% of the reference PSCs without additives. This improvement is primarily ascribed to the enhanced electron transport , reduced recombination rates and much improved microstructures with large grain size and low defect density at grain boundaries. Importantly, it is revealed that the modified PSCs at the optimized concentrations of alkali thiocyanates additives exhibit remarkably improved stability than the reference PSCs against humid circumstance, and a continuous exposure to humid air without encapsulation over 45 days only records about 5% degradation of the efficiency. These findings provide a facile approach to fabricate efficient and stable PSCs by low processing temperature in ambient air, both of which are highly preferred for future practical applications of PSCs.
研究领域:
材料科学
·
能源科学
·
纳米技术
·
光电化学
·
半导体器件
·
薄膜物理
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）