JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2024
·Vol. 35
·期 30
·1965
·
IF 2.8
Wei Lianghuan,Dong Tianhao,Cui Yongpeng,Zhu Shengjie,Si Jianxiao
One potential application for flexible thermoelectric (TE) devices based on inorganic ductile fiber materials is the development of self-powered wearable electronics. In the work, the molten drawing method was employed for fabricating inorganic ductile Ag 2 S 0.7 Te 0.3 fibers. The output voltage and maximum output power of the single fiber are 3.3 mV and 837.4 nW, respectively, under a temperature difference of 50 K. The Ag 2 S 0.7 Te 0.3 fiber shows outstanding stability performance in the service stability test with a critical electric density of 36 A cm −2 and exhibits a tensile strain of 5%. The high temperature sensitivity of the Ag 2 S 0.7 Te 0.3 fibers TE device demonstrates the application potential in wearable electronics products.
研究领域:
材料科学
·
纳米科技
·
能源材料
·
柔性电子学
·
热电转换
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2021
·
IF 9.127
Rui Xuan,Jinhui Li,Dongxu Huang,Tao Wang,Bo Zhang,Fangfang Niu,Guoping Zhang,Rong Sun,Ching-Ping Wong
With the continuous development of flexible electronic devices, the corresponding demands for electrochemical storage devices with flexibility and self-healing properties have been raised. However, the current supercapacitors still have great limitations in mechanical and self-healing performance. Herein, flexible and self-healing poly (2-acrylamido-2-methyl-1-propanesulfonic acid) (PAMPSA)/polyvinylimidazole (PVI)/LiCl polyelectrolyte is easily fabricated by a one-step copolymerization . The combined effect of electrostatic interaction and hydrogen bonding significantly enhances the mechanical and self-repairing ability of polyelectrolytes, showing excellent stretchability of 1137%, fracture stress of 154.57 kPa, and high healing efficiency of 91% at room temperature for 24 h. Besides, flexible electrode is prepared by adsorbing poly 3,4-ethylenedioxythiophene/polystyrene sulfonate on a polyurethane sponge. After assembly with a polyelectrolyte, the as-prepared supercapacitor proves excellent electrochemical performance. The area capacitance is 106 mF cm −2 at 50 mV s −1 and excellent cycle stability (97% capacity retention rate after 2000 cycles). In addition, the completely cut off supercapacitor can be successfully restored to 90% of the original capacitance, and still maintain a capacitance retention rate of up to 98% after 1000 cycles. This work provides a possible solution for designing low-cost intelligent and durable electrochemical storage device for smart clothing or electronic skin.
研究领域:
材料科学
·
高分子化学
·
电化学
·
柔性电子学
·
能源存储
✓ 已验证
DOI
高影响因子
CARBON
·
2023
·
IF 10.9
Lu Han,Dehui Wang,Mengdie Li,Yang Zhong,Kanghong Liao,Yingbo Shi,Wenjing Jie
As the development of neuromorphic computing , it is meaningful to explore the synaptic memristors based on organic materials owing to their advantages in low cost, good mechanical flexibility and strong biocompatibility. In this work, organic pentacene thin films have been deposited on different substrates by the thermal evaporation method. The prepared thin films on SiO 2 /Si substrates demonstrate the co-existence of digital and analog resistive switching (RS) behaviors as well as a series of synaptic plasticity. To characterize the flexibility of the organic thin films, lateral memristors have been fabricated on polyethylene terephthalate (PET) substrates and demonstrate comparable RS behaviors when the bending radius is decreased to 1.26 cm or after 1000 bending. Furthermore, vertical memristors with Pt/pentacene/indium tin oxide (ITO) structure have been constructed when the organic thin films are deposited on ITO/PET substrates, exhibiting bipolar RS behaviors with low SET voltage of 0.65 V. The vertical synaptic memristors can be used to simulate the “learning-forgetting” experience of human brain. More importantly, an artificial neural network (ANN) can be simulated based on the vertical synaptic memristors, demonstrating 93.8 % recognition accuracy for hand-written digit image. This study suggests potential applications of the organic pentacene thin films for neuromorphic computing.
研究领域:
材料科学
·
微电子学
·
生物电子学
·
纳米科技
·
神经工程
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Kun Qi,Hongbo Wang,Xiaolu You,Xuejiao Tao,Mengying Li,Yuman Zhou,Yimin Zhang,Jianxin He,Weili Shao,Shizhong Cui
Highly sensitive wearable textile pressure sensors represent the key components of smart textiles and personalized electronics, with potential applications in biomedical monitoring, electronic skin, and human-machine interfacing. Here, we present a simple and low-cost strategy to fabricate highly sensitive wearable textile pressure sensors for non-invasive human motion and physiological signal monitoring and the detection of dynamic tactile stimuli. The wearable textile sensor was woven using a one-dimensional (1D) weavable core-sheath nanofiber yarn, which was obtained by coating a Ni-coated cotton yarn electrode with carbon nanotube (CNT)-embedded polyurethane (PU) nanofibers using a simple electrospinning technique . In our design, the three-dimensional elastic porous nanofiber structure of the force-sensing layer and hierarchical fiber-bundled structure of the conductive Ni-coated electrode provide the sensor with a relatively large surface area, and a sufficient surface roughness and elasticity. This leads to rapid and sharp increases in the contact area under stimuli with low external pressure. As a result, the textile pressure sensor exhibits the advantages of a high sensitivity (16.52 N −1 ), wide sensing range (0.003–5 N), and short response time (~0.03 s). Owing to these merits, our textile-based sensor can be directly attached to the skin as usual and conformally fit the shape deformations of the body’s complex flexible curved surfaces. This contributes to the reliable real-time monitoring of human movements, ranging from subtle physiological signals to vigorous movements. Moreover, a large-area textile sensing matrix is successfully fabricated for tactile mapping of spatial pressure by being worn on the surface of wrist, highlighting the tremendous potential for applications in smart textiles and wearable electronics .
研究领域:
生物医学工程
·
柔性电子学
·
智能纺织品
·
可穿戴传感器
·
人机交互
·
转化医学
✓ 已验证
DOI
高影响因子
CARBON
·
2024
·
IF 10.5
Boru Du,Jingyu Lu,Guantao Wang,Mingguang Han,Yan Gao,Sida Luo
Laser-induced graphene (LIG) is a highly promising technology for assembling thin-film electronics with miniaturized surficial patterns, although hard to guarantee both high-quality formation of raw materials and high resolution of feature size. In this study, a combined microcontact printing (μCP) and LIG protocol is creatively utilized to fabricate ultra-thin graphene films with highly ordered micro-stripe arrays. In addition to realize various patterned structures with unique scalable and stackable characteristics, PAA concentration (4–8 wt%) is systematically investigated as a critical parameter to precisely control the feature size of micro-patterns before and after the irradiation process, including line width (before: 5.37–22.44 μm, after: 4.83–22.32 μm) and average height (before: 69.81–187.39 nm, after: 5.72–48.61 nm). By further exploring a defocused multi-lasing strategy, sheet resistance of the graphene array could be optimized dramatically from 634.1 kΩ/sq to 1.9 kΩ/sq, while maintaining low ablation (45.38 % porosity) and high carbon content (84.2 wt%). Lastly, the process is demonstrated to assemble different graphene based electronic devices with miniaturized sizes, including liquid sensors with sensitivity of 2.7 % μL −1 and electrothermal heaters with temperature-ramping rate as high as 24.7 °C/s and working temperature as high as 248 °C.
研究领域:
材料科学
·
纳米科技
·
电子工程
·
生物医学工程
·
表面科学
·
柔性电子学
✓ 已验证
DOI
高影响因子
Materials Today Physics
·
2022
·
IF 11.021
An Hua,Zifeng Mai,Binyu Wu,Zichong Ji,Min Fu,Yougen Hu,Siya Huang
Flexible and stretchable electrodes as the cornerstone of bioelectronics are bridging human with biomedical devices in an unprecedentedly intimate and safer way. However, maintaining high electrical properties while adapting to moist, complex and dynamic biosurfaces for a prolonged period of usage remains a great challenge. Herein, we demonstrate an omnidirectionally stretchable transparent electrode based on serpentine Au nanotrough (AuNT) networks with highly tunable optoelectronic performances (sheet resistance of down to ∼13 Ω sq −1 at transmittance of 90%). Owing to the junction-free nanoweb structure with an ultralow percolation density, the AuNT networks demonstrate excellent thermal stability as an efficient Joule heater with a wide operating temperature range up to 390 °C. The in-plane buckled AuNT electrode exhibits controllable heat generation upon repetitive tensile strains of 60%, enabling wearable thermotherapy at highly strained joints . Such highly stretchable electrodes can be directly laminated on the balloon catheter as expandable, high-density nanomesh ablators, showing excellent thermal and moisture stability during 15 days of storage under conditions of relative humidity of 85% at 70 °C and over 1000 heating cycles to 60 °C, offering strong potential for biomedical therapeutics , such as thermal ablation and electrochemotherapy.
研究领域:
生物医学工程
·
柔性电子学
·
转化医学
·
生物传感器
·
组织工程
·
纳米医学
·
穿戴式医疗设备
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Xuejiao Tao,Yuman Zhou,Kun Qi,Chaozhong Guo,Yunling Dai,Jianxin He,Zhao Dai
Flexible triboelectric generators present a wide range of prospective applications owing to their small size, light weight, and wearability; in addition, they can convert external mechanical energy into electrical energy to provide an energy supply for wearable electronic products. In this study, a wearable textile triboelectric generator was developed by weaving polyurethane (PU) nanofiber core-spun yarn and Si 3 N 4 -electret-doped polyvinylidene fluoride (PVDF) nanofiber core-spun yarn into a double-layer fabric. Within the double-layer fabric, one layer was Si 3 N 4 -doped PVDF (denoted as Si 3 N 4 @PVDF) nanofiber fabric, and the other was PU nanofiber fabric. When subjected to an external mechanical force, PU nanofiber fabric and Si 3 N 4 @PVDF nanofiber fabric came into contact and were able to convert external mechanical energy into electrical energy. The most notable instantaneous electrical performance of this triboelectric nanogenerator was open circuit voltage of 71 V, short-circuit current of 0.7 μA, and output power of 56 μW. Additionally, the wearable textile triboelectric generator exhibited superior washability, stability, and cycle durability. More significantly, it was capable of driving some low-consumption electronic products, including capacitors, LED bulbs, and digital meters, thereby exhibiting a strong potential for flexible self-powered electronic devices and intelligent textiles .
研究领域:
纳米能源材料
·
智能纺织工程
·
柔性电子学
·
能量收集技术
·
可穿戴设备
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Na Li,ChunYi Zhi,Haiyan Zhang
The preparation of high specific-capacity pseudocapacitive transition-metal-oxide/hydroxide (TMH) materials into transparent micro-structure electrodes is a great challenge and has become the bottleneck restricting the performance of transparent flexible supercapacitors . Beyond that, extending the operating voltage window is an urgent need for improving energy density . Here, Co(OH) 2 nanosheets and amorphous FeOOH nanowires were prepared into transparent films through a simple and scalable bio-inspired method at the air-solution interface. Both nanostructures are enwrapped in graphene shells (Co@Gr-TFandFe@Gr-TF) for use as transparent asymmetric pseudocapacitive electrodes. The unique encapsulation structures (1) provide pseudocapacitive electrode materials, especially an amorphous FeOOH structure cathode, (2) build up rapid three-dimensional electron and ion transport pathways together with the underlying ITO layer, (3) alleviate the exfoliation and dissolution of the active materials into electrolyte, and (4) extend the potential window of the FeOOH cathode from −0.8 ∼ 0 V to −1.2 ∼ 0 V with minimal cycling stability degradation. The asymmetric transparent and flexible supercapacitor based on Co@Gr-TF//Fe@Gr-TF operated at 1.8 V exhibits good transparency (50.5% at 550 nm), high specific capacitance (25.5 mF cm −2 , one order higher than the maximum value reported for FFT-GP), and high energy density (1.04 mWh cm −3 , comparable to that of nontransparent devices) as well as a long cycle life (10 000 cycles) with high-capacity retention (83.5%).
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
柔性电子学
·
功能薄膜
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Ying Jiang,Kai Chen,Jinping He,Yuxue Sun,Xiaorong Zhang,Xiaoxing Yang,Haiming Xie,Jun Liu
Composite solid electrolytes (CSEs), which combine the advantages of solid polymer electrolytes and inorganic solid electrolytes, are considered to be promising electrolytes for all-solid-state lithium metal batteries. However, the current CSEs suffer from defects such as poor inorganic/organic interface compatibility, lithium dendrite growth, and easy damage of electrolyte membrane, which hinder the practical application of CSEs. Herein, a CSE (PBHL@LLZTO@DDB) with polyurethane (PBHL) as the polymer matrix and Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) modified by silane coupling agent (DDB) as inorganic fillers (LLZTO@DDB) has been prepared. Disulfide bond exchange reactions between PBHL and LLZTO@DDB enable PBHL@LLZTO@DDB to form a dynamic three-dimensional (3D) inorganic/organic hybrid network, which promotes the uniform dispersion of LLZTO in PBHL@LLZTO@DDB, improves the Li + conductivity (1.24 ± 0.08 × 10 −4 S cm −1 at 30 ℃), and broadens the electrochemical stability window (5.16 V vs. Li + /Li). Moreover, a combination of hydrogen bonds and disulfide bonds endows PBHL@LLZTO@DDB with excellent self-healing properties. As such, both all-solid-state symmetric and full cells exhibit excellent cycle performance at ambient temperature. More importantly, the healed PBHL@LLZTO@DDB can almost completely restore its original electrochemical properties, indicating its application potential in flexible electronic products.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
固态离子学
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2019
·
IF 8.456
Changhong Yang,Yajie Han,Jin Qian,Panpan Lv,Xiujuan Lin,Shifeng Huang,Zhenxiang Cheng
A recent hot-spot topic for flexible and wearable devices involves high-performance nonvolatile ferroelectric memories operating under compressive or tensile mechanical deformations. This work presents the direct fabrication of a flexible (Mn,Ti)-codoped multiferroic BiFeO3 film capacitor with Pt bottom and Au top electrodes on mica substrate. The fabricated polycrystalline Bi(Fe0.93Mn0.05Ti0.02)O3 film on mica exhibits superior ferroelectric switching behavior with robust saturated polarization (Ps ∼ 93 μC/cm2) and remanent polarization (Pr ∼ 66 μC/cm2) and excellent frequency stability (1–50 kHz) and temperature resistance (25–200 °C), as well as reliable long-lifetime operation. More saliently, it can be safely bent to a small radius of curvature, as low as 2 mm, or go through repeated compressive/tensile mechanical flexing for 103 bending times at 4 mm radius without any obvious deterioration in polarization, retention time at 105 s, or fatigue resistance after 109 switching cycles. These findings demonstrate a novel route to designing flexible BiFeO3-based ferroelectric memories for information storage and data processing, with promising applications in next-generation smart electronics.
研究领域:
材料科学
·
电子器件
·
铁电学
·
柔性电子学
·
非易失性存储器
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2023
·
IF 5.9
Juan Gao,Qin Gao,Jiangshun Huang,Xiaoyue Feng,Xueli Geng,Haoze Li,Guoxing Wang,Bo Liang,Xueliang Chen,Yuanzhao Su,Mei Wang,Zhisong Xiao,Paul K. Chu,Anping Huang
Perovskite-based memristors have attracted much attention in synaptic simulation due to their outstanding electrical properties and promising potential in neuromorphic computing (NC). In this work, inorganic lead-free perovskite-based memristors composed of Ag/Cs3Bi2–xLixI9–2x (CBLxI)/ITO (x = 0, 0.2, 0.4, 0.6) are fabricated, and the electrical properties, such as endurance, on/off ratio, and retention time, are determined. It is found that the device with x = 0.4 shows good characteristics, such as a set voltage of −0.1 V and a retention time of 104 s. The multilevel storage performance is investigated, and multiple synaptic characteristics, such as paired-pulse facilitation (PPF), spike-voltage-dependent plasticity (SVDP), spike-width-dependent plasticity (SWDP), spike-timing-dependent plasticity (STDP), and learning–forgetting, are simulated. The conductive mechanism of the device is analyzed and discussed with an analogy to natural volcanic rocks, which also have a large surface area, high adsorption, and high chemical inertness. An artificial neural network (ANN) based on the potentiation/depression characteristics is designed and analyzed theoretically, and a pattern recognition rate of 94.25% is accomplished. The strategy and results described in this paper provide insights into the development of nonvolatile memory devices boding well for the adoption of neuromorphic computing for image recognition.
研究领域:
材料科学
·
神经形态工程
·
电子器件
·
人工智能
·
纳米电子学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）