The trichloroethylene production industry generates high-boiling-point solid residues during rectification, which contain high concentrations of chlorinated contaminants, particularly hexachlorobutadiene (HCBD). Traditionally, these distillation residues are managed through co-incineration or landfilling, leading to environmental and economic challenges. In this study, we present a rapid and environmentally friendly electrothermal approach for both detoxifying and upcycling distillation residue into graphene-based electromagnetic wave (EMW) absorbing materials. By employing a DC power pulse discharge with a 10 s duration, we achieved over 99 % HCBD degradation efficiency. Characterization results indicate that the thermal shock transforms the distillation residue into high-value turbostratic pulse graphene (tPG). This tPG, featuring a unique structure, demonstrates substantial potential as an EMW absorber, with an effective absorption bandwidth of 3.9 GHz and a reflection loss of −42.0 dB at a minimal matching thickness of 1.6 mm. The method offers a sustainable, cost-effective solution for hazardous waste management, combining rapid processing with high-value material production.
Electrical resistance heating (ERH) has been widely applied for contaminant remediation in heterogeneous sites especially when low permeability zones exist, yet requires high energy input. To address the low energy-efficiency of ERH using conventional alternating current (AC), pulsed direct current (PDC) obtained by current rectification was introduced for heating to enhance dense nonaqueous phase liquid (DNAPL) migration in low permeability zones. Here we showed the proof-of-concept in a lab-scale two-dimensional heterogeneous sand system (40 cm × 30 cm) with trichloroethylene (TCE) DNAPL in the central low permeability zone. Applying PDC achieved faster temperature increase compared to that with the conventional AC of the same voltage gradient. The overall TCE removal efficiency from the cell increased from 79.0% to 89.6% with increasing PDC voltage gradient from 3 to 3.75 V cm –1 , compared to that of 9.4–91.1% with conventional AC. The lowest energy consumption of PDC was 390 kWh kg –1 at a medium voltage gradient of 3.5 V cm –1 , which was 27.8% lower compared to that with AC at the same voltage gradient. These results suggest that remediation using pulsed direct current is a promising approach to improve the energy-efficiency and effectiveness of ERH.
危险品化学品经营许可证（带存储）