Advanced Intelligent Systems
·
2019
·Vol. 1
·期 3
·1900022
·
IF 0
Yang Feng,Xu Gao,Ya-Nan Zhong,Jia-Ling Wu,Jian-Long Xu,Sui-Dong Wang
Emerging organic synaptic devices are promising in exploring soft and biocompatible neuromorphic computing systems. By means of a simple and low-cost solution process, the polymer thin-film memristors are designed and characterized. The polymer memristors have a bilayer structure composed of an ion-rich semiconducting layer and an ion-collecting conducting layer, where the ion redistribution depending on device operation history has an impact on carrier concentration and results in the memristive characteristics. A visible electrochromic feature is observed during the electrical measurements, supporting the proposed Li + ion drift/diffusion mechanism. The polymer memristors show the continuous and reversible conductivity tuning with a temporary memory effect, which enables the successful emulation of the frequency-dependent synaptic plasticity. The polymer thin-film memristors may offer a strategy for developing building blocks of organic neuromorphic circuits.
研究领域:
生物电子学
·
神经形态工程
·
有机电子学
·
分子器件
·
生物医学工程
✓ 已验证
DOI
RSC Advances
·
2018
·Vol. 8
·期 33
·18690-18697
·
IF 2.936
Qian Liu,Zijie Xu,Wu Qiu,Chen Hou,Yanan Wang,Peijian Yao,Rui Yu,Wenxi Guo,Xiang Yang Liu
Ultraflexible electronics have received extensive attention due to their favorable properties, such as superior mechanical robustness, light weight and good compatibility with large-area roll-to-roll fabrication. Here we present a flexible sandwiched tungsten trioxide/silver nanotrough network/poly(3,4-ethylenedioxythiophene)–poly(styrene sulfonate) multi-layer transparent conducting electrode with prominent conductivity (sheet resistance as low as 1.08 Ω sq−1) and transparency (85%). In particular, the flexible transparent electrode exhibits excellent mechanical robustness upon bending and stretching. This hybrid electrode can be further adhered tightly to a layer of WO3 to form an electrochromic device, which simultaneously displays a rapid switching time (0.75 s/1.82 s for bleaching/coloring) and high cyclic performance (86% retention of the initial optical contrast after cycling for 30 000 s). In addition, our electrode can also be fabricated on various flexible substrates, such as polyethylene cling wrap, polydimethylsiloxane and Ecoflex, with sustained electrochromic properties after bending, twisting, stretching and even strong kneading. Our work provides new opportunities for the next generation of flexible and wearable electronics applied on various flexible substrates.
研究领域:
材料科学
·
纳米科技
·
柔性电子学
·
功能材料
·
电化学
·
高分子材料
·
器件物理
✓ 已验证
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2017
·
IF 3.012
Y.X. Wei,Y.B. Ma,M. Chen,W.M. Liu,L. Li,Y. Yan
Electrochromic devices (ECDs) based on WO 3 and Ti doped V 2 O 5 films are fabricated by using lithium (LiClO 4 ) liquid electrolyte containing ferrocene redox couple . The addition of ferrocene in electrolyte enhances electrochromic properties of device. The device based on LiClO 4 -Ferrocene electrolyte has larger charge density than that based on LiClO 4 electrolyte. In the 600–1500 nm wavelength range, the transmittance of colored device is under 2% and it has faster coloring response. At 680 nm wavelength, it shows larger changes in transmittance from 68% to 1.8% while device based on LiClO 4 electrolyte changes transmittance from 68.3% to 11.5%. The cycling data reveal that device based on LiClO 4 -Ferrocene electrolyte can yield more stable electrochromic properties at 65 °C than room temperature. In order to deeper understand the effect of electrolyte on films and devices, electrochemical impedance spectroscopy (EIS) and the voltage distribution of films based on an analog cell are separately measured and analyzed in LiClO 4 and LiClO 4 -Ferrocene electrolytes. Results indicate that compared with LiClO 4 electrolyte, films have lower charge-transfer resistance and the distributed voltage on Ti doped V 2 O 5 film is larger in LiClO 4 -Ferrocene electrolyte, which can enhance optical properties of ECD by improving charge density of Ti doped V 2 O 5 film.
研究领域:
材料科学
·
电化学
·
功能材料
·
纳米科技
·
能源技术
✓ 已验证
DOI
高影响因子
Small
·
2019
·Vol. 15
·期 7
·1804974
·
IF 10.856
Na Li,Pingping Wei,Linan Yu,Junyi Ji,Jiupeng Zhao,Chuanbo Gao,Yao Li,Yadong Yin
The dynamic optical switch of plasmonic nanostructures is highly desirable due to its promising applications in many smart optical devices. To address the challenges in the reversibility and transmittance contrast of the plasmonic electrochromic devices, here, a strategy is reported to fabricate color switchable electrochromic films through electro-responsive dissolution and deposition of Ag on predefined hollow shells of Au/Ag alloy. Using the hollow Au/Ag alloy nanostructures as stable seeds for site-specific deposition of Ag, elimination of the random self-nucleation events is enabled and optimal reversibility in color switching is allowed. The hollow structure further enables excellent transmittance contrast between the bleached and colored states. With its additional advantages such as the convenience for preparation, high sensitivity, and field-tunable optical property, it is believed that this new electrochromic film represents a unique platform for designing novel smart optical devices.
研究领域:
材料科学
·
纳米科技
·
光学工程
·
功能材料
·
电化学
✓ 已验证
DOI
高影响因子
DYES AND PIGMENTS
·
2021
·
IF 4.889
You Liu,Fang Liu,Jungan Wang,Hongyan Huang,Suhao Yan,Song Gao,Lin Wang,Wei Huang,Tianshi Qin
Wide-bandgap photovoltaics (WBPV) could not only provide electrical energy by photoelectronic conversion of the invisible part of the solar spectrum, but also usually had the unique advantage of high open circuit voltage ( V oc). In this work, we reported a novel HTM based on tetrakis (N-phenothiazine) Spirobifluorene (Spiro-PT), its HOMO energy level could be well matched with MAPbBr 3 perovskite HOMO energy level. This HTM could effectively suppress nonradiative recombination, which leads to an increase in the photovoltage of WBPV to more than 1.41 V. As a result, the n-i-p mesoscopic structured WBPV achieved a champion PCE of 7.36% as well as excellent operational stability exhibiting 91% of initial efficiency after 500 h continuous illumination without encapsulation. Based on the high V oc of the MAPbBr 3 /Spiro-PT device, the photovoltaic electrochromic device showed a response speed (the average coloring time was 40 s and the bleaching time was 272 s) and high average visible light transmittance contrast (about 37% in 450–780 nm), the corresponding electrochromic device with maximum dynamic contrast up to 46% at 600 nm between bleached and colored states. This WBPV-powered electrochromic system could provide a pathway towards stand-alone smart window technique for future energy-saving buildings.
研究领域:
材料科学
·
光伏技术
·
纳米能源
·
智能窗技术
·
器件物理
✓ 已验证
DOI
高影响因子
Laser & Photonics Reviews
·
2023
·Vol. 17
·期 12
·2300476
·
IF 11
Wenhai Sun,Xiang Zhang,Hulin Zhang,Zichen Ren,Mingjun Chen,Yingjun Xiao,Zitong Li,Jianbo Deng,Dukang Yan,Leipeng Zhang,Yao Li
The development of electrochromic devices (ECDs) that can dynamically modulate infrared (IR) emissivity while maintaining a wide color gamut distribution for visible (VIS)-IR compatible spectral manipulation has been a long-standing challenge. Current ECDs are limited by simultaneous changes in IR emissivity and VIS colors when subjected to external potential, restricting their potential applications. This work presents, for the first time, VIS–IR compatible ECDs capable of displaying VIS multicolor and dynamically modulating IR emissivity via a Ge/HfO 2 Fabry–Perot cavity structure. The all-solid-state VIS-IR compatible ECD with the structure of ITO/NiO/Ta 2 O 5 /Li/WO 3 /ITO/Ge/HfO 2 achieves not only emissivity modulation of 0.20 at potentials of −2.5 V and +2.5 V in the wavelength range of 2.5–25 µm, but also, due to the presence of Fabry–Perot cavity, the novelty compatible device structure achieves static multicolor modulation, thus decoupling VIS and IR emissivity modulation. Additionally, a flexible VIS-IR compatible ECD based on polyaniline is also constructed. This novel approach offers a promising possibility for multispectral compatible manipulation, VIS multicolor, and IR signal processing applications.
研究领域:
材料科学
·
光学工程
·
纳米光子学
·
功能材料
·
智能器件
·
表面物理
·
能源材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2015
·Vol. 27
·期 4
·3549-3556
·
IF 1.569
Wang Lu,Yang Zhouyong,Ni Xiuyuan
We prepare the mesoporous polythiophene–WO 3 film through in situ polymerization which is initiated by WO 3 , and fabricate the electrochromic device with the composite film. The influences of the electrolyte ions, film morphologies and counter electrode on the electrochromism of the devices are explored by UV–Vis transmittance spectra and cyclic voltammetry tests. With the aim to enhance the contrast optical transmittance, we develop the binary composite electrolytes of LiClO 4 and N(C 4 H 9 ) 4 ClO 4 solution which can promote intercalation/deintercalation process. Besides that, we use polyethylene oxide as pore-forming agent on the polythiophene–WO 3 films, so that it will be easier for electrolyte ions to diffuse in the porous film. A NiO layer also has a complementary effect on the cathodic coloration films and increases the contrast optical transmittance remarkably. Equipped with the binary electrolyte and the NiO layer as the counter electrode, the film device exhibits high performance with the contrast optical transmittance (ΔT) of 62 % and the coloration efficiency of 212.6 cm 2 /C.
研究领域:
材料科学
·
电化学
·
功能材料
·
纳米材料
·
能源材料
·
表面科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）