IONICS
·
2021
·Vol. 27
·期 8
·3339-3346
·
IF 2.817
Liu Huirong,Li Jianling,Feng Wei,Han Guimei
Commercial lithium-ion batteries have safety risks due to the use of electrolyte-containing flammable organic solvents. The development of all solid-state lithium ion batteries with solid electrolyte is a feasible technical way to improve the safety of batteries. In this work, PVDF-based composite solid-state electrolytes (CSEs) were prepared by coupling Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) and polyvinylidene fluoride (PVDF). The electrochemical performance and interfacial compatibility between composite electrolyte and electrode were improved by the combination of appropriate amount of Li-ion-conducting particles and the insulating polymer. The corresponding solid-state battery of LiFePO 4 |PVDF-LLZTO-CSE| Li is fabricated and delivers initial discharge capacity of 162.4 mAh g -1 , and coulomb efficiency is approximately 98.5%. And the solid-state battery exhibits satisfactory rate capability and cycling stability at room temperature. This study suggests that a combination of the lithium garnet particles and insulating polymer is one of the promising methods to solve the problem of liquid electrolyte.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
SOLID STATE IONICS
·
2020
·
IF 3.107
Yayu Guo,Huilan Guan,Wenxiu Peng,Xuelei Li,Yue Ma,Dawei Song,Hongzhou Zhang,Chunliang Li,Lianqi Zhang
Li 7 P 3 S 11 (70Li 2 S·30P 2 S 5 ) sulfide is a promising electrolyte candidate for all-solid-state lithium batteries (ASSLBs) owing to its high ionic conducivity and wide electrochemical stability window. However, the sensitivity to moisture and the poor interfacial compatibility with electrodes limit the conventional application of Li 7 P 3 S 11 . Herein, we present a substitution strategy to produce a O-incorporated 70Li 2 S·(30-x)P 2 S 5 ·xP 2 O 5 (mol%) sulfide electrolyte to address above issues. The elaborately designed electrolyte is prepared via wet vibration ball milling technique with P 2 O 5 substitution content of 1, 3 and 5. As a result, the 70Li 2 S·27P 2 S 5 ·3P 2 O 5 electrolyte displays the highest ionic conductivity of 2.61× 10 −3 S cm −1 which outperforms than that of pristine Li 7 P 3 S 11 (ionic conductivity of 1.35 × 10 −3 S cm −1 ) and the assembled LiCoO 2 @LiNbO 3 /70Li 2 S·27P 2 S 5 ·3P 2 O 5 /Li-In ASSLB exhibits the superior capacity retention of 93.2% after 100 cycles at 0.5C. The reason for the developed electrochemical performance lies in the substitution of the non-bridging sulfur atom with bridging oxygen atom, from which the interaction between electrolyte and lithium ions is weakened, thereby the rapid transfer of lithium ions is facilitated. Furthermore, Raman and XRD results indicate that the adverse interfacial reactions are suppressed through P 2 O 5 substitution. This work suggests that P 2 O 5 substitution is an effective strategy for sulfide electrolyte toward high energy all-solid-state lithium batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Chuankai Fu,Shuaifeng Lou,Yi Cao,Yulin Ma,Chunyu Du,Pengjian Zuo,Xinqun Cheng,Weiping Tang,Yongmin Wu,Yunzhi Gao,Hua Huo,Geping Yin
Recently, rechargeable lithium metal polymer battery (LMPB) attracts increasing attention because of its high safety and energy density properties. However, the high contact interfacial resistance of solid-state electrode and electrolyte is still an obstacle to satisfy the demand of high current density and long cycle stability, especially at room and lower temperature. Here, we develop a simple and efficient heat treatment method, to improve the interfacial compatibility between electrode and electrolyte in all-solid-state LMPB, successfully realizing workable LMPB at a reduced temperature (30 °C). The LMPB shows excellent cycling performance and rate capability in the voltage range of 2.5–4.2 V. The behavior of Li + plating/stripping on the surface of lithium metal anode is greatly enhanced. Meanwhile, the interfacial resistance of the LMPB decrease significantly after the heat treatment process .
研究领域:
材料科学
·
电化学
·
能源存储
·
固态电池
·
界面工程
✓ 已验证
DOI
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Yuanyuan Li,Jun Cheng,Jianwei Li,Zhen Zeng,Yixuan Guo,Hongqiang Zhang,Hongbin Liu,Xiao Xu,Yiwei Rao,Deping Li,Lijie Ci
Sulfide solid state electrolytes capture much attention owing to their high conductivity and decent mechanical property. Nevertheless, the moisture instability and poor interfacial compatibility against lithium metal anode remain challenging and hinder the practical application. Herein, we report a novel indium (In) doping strategy based on the hard-soft-acid-base theory to tackle these issues. Optimized Li 7 P 2.9 S 10.9 In 0.1 electrolyte exhibits a high ionic conductivity of 4.1 × 10 −3 S cm −1 and achieves an enhanced interfacial compatibility. Importantly, as In partially replaces the phosphorus (P), the amount of released hydrogen sulfide can be significantly decreased and the air stability is improved. The all-solid-state battery assembled with the Li 7 P 2.9 S 10.9 In 0.1 electrolyte demonstrates a high discharge capacity and a good cycling stability under a high current density of 1.0 C. This work provides a practical and effective method to design sulfide-based solid-state electrolyte with high ionic conductivity and enhanced air stability for all-solid-state battery applications.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）