JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2018
·
IF 5.091
Xian-peng Zhang,Jian Luo,Da-xia Zhang,Tong-fang Jing,Bei-xing Li,Feng Liu
In this paper, porous microcapsules with tunable pore sizes were prepared using interfacial polymerization by employing a temperature-responsive cross-linking agent above its so-called cloud point temperature ( T scp ). The influences of porosity on the surface morphology , release profile and biological activity of the microcapsules were investigated. The results showed that both pore size and pore density could be controlled by regulating either the amount of cross-linking agent or the ratio of core material to shell material. Furthermore, the porosity of the microcapsules determined their release properties and further regulated the bioactivity of the microcapsules. In addition, the mechanism of pore formation was confirmed by investigating the morphology of microcapsules below the T scp . The microencapsulation methodology described here is convenient and versatile, which can be easily extended to encapsulate a broad range of lipophilic core materials.
研究领域:
药剂学
·
生物材料
·
纳米医学
·
药物递送
·
高分子科学
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Qing Zhang,Zhenping Ma,Xin Jing,Hao-Yang Mi,Yuejun Liu,Songwei Li
The polyamide (PA) reverse osmosis (RO) membranes prepared by interfacial polymerization at a free aqueous–organic interface always suffer from polymerization instability on the free-interface and low chlorine resistance. Focusing on these problems, in this study, a new approach was proposed which introduced an additional buffer layer to assist the free-interfacial polymerization (BLFIP). And due to the adjustment of the mitigation of the organic phase and water phase on the free-interface, defect-free PA membranes with significantly improved surface smoothness were successfully prepared by the proposed BLFIP process and the resultant membranes demonstrated superior desalination performance compared to the PA membranes prepared with the previous technique. With the optimized concentration of 0.3 wt.% trimesoyl chloride (TMC) and 0.6 wt.%, m-xylylenediamine, the prepared BLFIP PA membrane showed salt rejection rate of 92.55%, 92.01%, 83.99% and 95.16%, to Na 2 SO 4 , MgSO 4 , NaCl and methyl orange, respectively at 5 bar, while maintained a water flux of about 2 Lm –2 h –1 bar –1 . More importantly, the BLFIP PA membrane possesses excellent long-term stability, and chlorine resistance comparing with traditional PA membranes based on TMC and m-phenylenediamine, which demonstrated the new method in this study paved a facile way for preparing RO filtration membranes with outstanding performance in seawater desalination.
研究领域:
材料科学
·
膜分离技术
·
环境工程
·
水处理
·
高分子化学
·
界面化学
✓ 已验证
DOI
高影响因子
Desalination and Water Treatment
·
2024
·
IF 1
Dapeng Zhang,Zicheng Yao,Han Zhang,Guiru Zhu,Lu Liu,Congjie Gao
A novel strategy to fabricate thin film nanocomposite (TFN) membrane was reported by dispersing nanofillers in the aqueous and organic phase simultaneously via interfacial polymerization of m-phenylenediamine and trimesoyl chloride. Two different nanofillers (hydrophilic MCM-48 and hydrophobic ZIF-8) were used to investigate the new strategy. Both hydrophilic MCM-48 and hydrophobic ZIF-8 can effectively improve the separation performance of the TFN membrane with higher water flux value maintaining high salt rejection via the novel strategy than conventional TFN membrane prepared with same total amount nanoparticles in singly organic phase or aqueous phase. It indicates that the new strategy is feasible to obtain the TFN membrane with excellence separation performance compared with the conventional method by dispersing nanofillers in singly phase. The new strategy is realized by dispersing less amount nanofillers in both phases simultaneously, which is possible to avoid the aggregation of nanoparticles and maximize the effect of nanoparticles.
研究领域:
材料科学
·
膜分离技术
·
纳米复合材料
·
环境工程
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2017
·Vol. 52
·期 19
·11701-11714
·
IF 2.599
Wei Xiuzhen,Hong Jialiang,Zhu Shuangshuang,Chen Jinyuan,Lv Bosheng
Polyethyleneimine (PEI) of various molecular weights and trimesoyl chloride (TMC) were utilized to prepare composite nanofiltration (NF) membranes via interfacial polymerization. The changes in the surface structure and chemical composition of the prepared membranes were evaluated using SEM, ATR-FTIR, XPS and surface potential measurements. The pure-water flux and rejection rates of the inorganic salts (MgCl 2 , MgSO 4 , Na 2 SO 4 and NaCl) through the resultant NF membranes were also investigated. The results showed that the performance of the composite NF membranes was significantly affected by the molecular weight of the PEI. Notably, the permeate flux and rejection rate of the NF membranes increased with the PEI molecular weight. In addition, when the NF membranes were used to treat actual wastewater from the electroplating industry, the NF membranes presented high-efficiency separation properties for heavy metal ions. The rejection rates of the NF membranes at 0.4 MPa for chromium, nickel, zinc and copper ions reached 92.6, 89.6, 89.2 and 86.3%, respectively.
研究领域:
材料科学
·
膜分离技术
·
环境工程
·
高分子化学
·
水处理
✓ 已验证
DOI
高影响因子
JOURNAL OF HAZARDOUS MATERIALS
·
2019
·
IF 7.65
Zhenhua Lü,Feng Hu,Haiyan Li,Xiru Zhang,Sanchuan Yu,Meihong Liu,Congjie Gao
The development of high performance membrane is crucial for enhanced separation efficiency of nanofiltration process in treating wastewaters from dye and textile industries. In this work, a novel thin-film composite nanofiltration membrane with an asymmetric separation layer composed of relatively compact skin and loose body was designed and fabricated for improved perm-selectivity and antifouling property. Nascent composite membrane with loose poly(piperazine amide) (PA) separation layer was interfacially synthesized and performed with secondary surface reaction using an aqueous tannic acid (TA) solution. Membrane characterizations verified the formation of compact TA skin on top of the loose PA layer through forming covalent bonds via esterification reaction. Compared with the composite nanofiltration membrane with PA symmetric separation layer having the same glucose rejection of about 82.0%, the permeability to pure water of the composite membrane with PA/TA asymmetric separation layer was higher by 28.0%, the water fluxes to aqueous solutions dissolved with model anionic dyes of alizarin yellow R, sunset yellow and Congo red under steady state were higher by 50.3, 43.9 and 36.1%, and the steady-state flux declines were lowered by 27.8, 43.4 and 23.5%, respectively. Furthermore, the PA/TA-based membrane also exhibited better antifouling property and rejection ability to alizarin yellow R.
研究领域:
材料科学
·
环境工程
·
膜分离技术
·
高分子化学
·
水处理
✓ 已验证
DOI
高影响因子
Small
·
2024
·Vol. 20
·期 29
·2310092
·
IF 13
Yu-Ren Xue,Chang Liu,Hao-Cheng Yang,Hong-Qing Liang,Chao Zhang,Zhi-Kang Xu
Supported ionic liquid membranes (SILMs), owing to their capacities in harnessing physicochemical properties of ionic liquid for exceptional CO 2 solubility, have emerged as a promising platform for CO 2 extraction. Despite great achievements, existing SILMs suffer from poor structural and performance stability under high-pressure or long-term operations, significantly limiting their applications. Herein, a one-step and in situ interfacial polymerization strategy is proposed to elaborate a thin, mechanically-robust, and highly-permeable polyamide armor on the SILMs to effectively protect ionic liquid within porous supports, allowing for intensifying the overall stability of SILMs without compromising CO 2 separation performance. The armored SILMs have a profound increase of breakthrough pressure by 105% compared to conventional counterparts without armor, and display high and stable operating pressure exceeding that of most SILMs previously reported. It is further demonstrated that the armored SILMs exhibit ultrahigh ideal CO 2 /N 2 selectivity of about 200 and excellent CO 2 permeation of 78 barrers upon over 150 h operation, as opposed to the full failure of CO 2 separation performance within 36 h using conventional SILMs. The design concept of armor provides a flexible and additional dimension in developing high-performance and durable SILMs, pushing the practical application of ionic liquids in separation processes.
研究领域:
膜科学与技术
·
气体分离
·
环境化学
·
材料化学
·
化学工程
·
可持续能源技术
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 1
·51418
·
IF 3.125
Lan Hao,Xulin Cui,Xiaoli Wu,Jingtao Wang,Yifan Li,Wenpeng Li,Xingzhong Cao,Haoqin Zhang
Efficient separation of aromatic-aliphatic hydrocarbon mixtures has long been an important topic in chemical industries. Organic nanofiltration (OSN) has been revealing great promise in separating solvent mixtures that has not been effectively resolved by the state-of-the-art technologies. Herein, novel OSN membranes are designed for the separation of toluene and n -heptane. Polyamide active layer with diaminonaphthalene as the aqueous phase monomer is prepared by interfacial polymerization for the first time. The addition of polydimethylsiloxane gutter layer, as well as the combination of spin coating technique and macroporous substrate, renders the membranes with loose and defect-free architectures. The as-designed membranes achieve a rather high selectivity of toluene over n -heptane (>4) together with ultra-high toluene permeance (>180 L m −2 h −1 bar −1 ). These membranes also present excellent stability in the long-term operation.
研究领域:
材料科学
·
膜分离技术
·
化学工程
·
纳米技术
·
高分子化学
·
工业催化
·
绿色化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）