JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2023
·
IF 2.6
Shuyang Shi,Baozhong Ma,Shuang Shao,Yongqiang Chen,Chengyan Wang
An original technology named HNO3 pressure leaching has been proposed by our team to leach Al from coal gangue and fly ash. Although the preliminary separation of Al and Fe had been achieved during leaching, a small amount of Fe impurity was still unavoidably dissolved into the leach liquor. To obtain pure Al2O3 during subsequent pyrolysis, it is imperative to synchronously remove Fe3+ during the crystallization of Al(NO3)3·9H2O. Herein, the phase equilibria of the Al(NO3)3–Fe(NO3)3–H2O(−HNO3) system at 25–40 °C and 0–8.12 mol kg–1 of HNO3 molality were investigated. The results indicated that the ternary system was a simple cosaturated type consisting of an immutable point, two univariate curves, and two crystallization regions. Notably, the solubility and crystallization region of Al(NO3)3·9H2O were barely impacted by acidity, while the opposite was true for Fe(NO3)3·9H2O. This finding was instructive for the crystallization of Fe(NO3)3·9H2O from the liquor with high Fe and low Al. Moreover, a high crystallization yield could be obtained at low temperatures. Finally, an appropriate crystallization procedure was provided. This study is expected to provide basic data and theoretical support for the crystallization and separation of mixed nitrates containing Al and Fe.
研究领域:
化学工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2021
·
IF 5.455
Mengyue Li,Yi Zhai,Xubin Zhang,Fumin Wang,Guojun Lv,Mengyao Li,Qing Zhang,Yongkui Liu
It is of great significance to develop a novel strategy to synthesize hollow zeolite without using mesoporogens due to its extremely short diffusion length. Ferric nitrate as a common iron source and structure direction agent has been used for synthesizing Fe-doped zeolite. However, the effect of ferric nitrate on the morphology of zeolite has not yet been elaborated. Here, we successfully synthesized hollow MFI zeolite with a framework iron-rich surface by using ferric nitrate as an iron source and seed-assistant strategy. It is the first time to propose that inorganic iron has the hollow structure-directing effect. Herein, by comparatively investigated the effect of iron content on the structure and evolution process of hollow zeolite, a novel crystallization mechanism has been proposed based on the competitive relationship between crystallization and dissolution rates. When the Si/Fe ratio reaches 25, the internal dissolution rate of seeds is faster than the surface crystallization rate of zeolite, the hollow structures are acquired. The obtained Fe-doped hollow zeolite exhibits superior catalytic performance for the reaction of phenol degradation. In this reaction, the higher effectiveness factor (η) close to 1 of Fe-doped hollow zeolite confirmed by calculations indicates its superior mass transferability.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES
·
2021
·
IF 3.382
Ali Yazdan,Bingkun Hu,Ce-Wen Nan,Liangliang Li
Boron nitride nanotubes (BNNTs) possess many fascinating properties that make them promising for various applications in microelectronics, biomedicine and coating. In this work, BNNTs were synthesized by a ball milling-annealing method. Boron powder was milled with promoters, lead(II) oxide (PbO) and iron(III) nitrate nonahydrate (Fe(NO 3 ) 3 ⋅9H 2 O), under the N 2 gas environment to prepare a precursor. Then, bamboo-like and cylindrical BNNTs were synthesized by annealing the precursor at 1150 °C under the NH 3 gas environment. The phase of the BNNTs was identified to be hexagonal BN by X-ray diffractometry, Raman spectroscopy and transmission electron microscopy . The effect of the promoter content in the precursor on the synthesis of the BNNTs was investigated. When the mass ratio of B:PbO:Fe(NO 3 ) 3 ⋅9H 2 O was 1:1:1, bamboo-like and cylindrical BNNTs with a diameter of 60–500 nm, uniform composition and polycrystalline microstructure were obtained.
研究领域:
材料科学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
Canadian Journal of Chemistry
·
2018
·Vol. 96
·期 8
·
IF 1.084
Yongshu Li,Nizhou Xu,Guangyao Mei,Yun Zhao,Yiyong Zhao,Jinghui Lyu,Guofu Zhang,Chengrong Ding
A mild, simple process for the effective aerobic oxidative deoximation of a wide range of ketoximes and aldoximes has been developed that utilizes Fe(NO3)3·9H2O as the single catalyst and molecular oxygen as the green oxidant. The environmentally benign protocol provides moderate to excellent yield and broad functional groups tolerance and is a valuable synthetic method for practical applications. According the relevant verification experiment, a plausible mechanism has been proposed.
研究领域:
有机化学
·
绿色化学
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Yu Tao,Baogang Yang,Fengyan Wang,Yanghao Yan,Xianyong Hong,Haihua Xu,Mingzhu Xia,Fengyun Wang
In this work, a facile and green method is applied to synthesize hydrophilic MOF-808(Zr) and modulate its defect content and particle size using different amounts of iron nitrate (denoted as F) to obtain serial XF-MOF-808 (“X” implied the dosage of used F). The development of additional adsorption sites and the fine-tune of pore and particle size based on MOF-808 significantly improved phosphate adsorption performance. In particular, the 0.5F-MOF-808 shows excellent adsorption capacity (305.5 mg/g) and rapid diffusion rate (37.51 mg/g·min 0.5 ) for phosphate at 298 K and initial pH = 6.5, outperforming pristine MOF-808 and most previously reported adsorbents. 0.5F-MOF-808 possesses a wide pH tolerance, outstanding reusability and excellent selectivity for phosphate adsorption from simulated wastewater, verified in environmental implication and regeneration experiments. Phosphate loaded on the adsorbent can be converted to struvite for agricultural fertilizer via a simple crystallization process. Compared to MOF-808, the exceptional sorption performance of 0.5F-MOF-808 is supported by decreased internal diffusion limitation, enlarged pore size and the development of new adsorption sites, which can be proved by advanced characterizations and batch adsorption experiments. This work presents a promising modification strategy of MOF materials for phosphate adsorption and recovery.
研究领域:
环境科学
·
材料科学
·
水处理
·
可持续化学
✓ 已验证
产品关联
DOI
高影响因子
Science of Advanced Materials
·
2015
·Vol. 7
·期 12
·2508-2514
·
IF 2.598
Zhong Suni,Chen Yanzhong,Song Fenyun,Tian Yong,Wang Xiufang
The synthesis of magnetic mesoporous carbon spheres (FeMCs) with sucrose, silica, and hydrated iron nitrite Fe(NO3)3 · 9H2O under neutral conditions was achieved by the ultrasonication method. Indomethacin (INC) was selected as the model drug.
FeMCs before and after INC-loading FeMCs were characterized by scanning electron microscopy (SEM), wide-angle X-ray diffraction (WXRD), nitrogen sorption isotherms, and differential scanning calorimetry (DSC). Release tests were conducted to confirm improvements in drug release kinetics. The
experimental results showed that the mesoporous carbon spheres exhibited BET surface areas of 615–876 m2/g and pore volumes of 1.36–2.25 cm3/g. INC showed an amorphous state after it was incorporated into the mesoporous channels of the FeMCs. Release kinetics
revealed that the release rate of INC from FeMCs was significantly higher than that of pure INC. This finding may be attributed to the reduced crystallinity of INC in the composites. FeMCs could be exploited as an alternative delivery system for poorly water-soluble indomethacin. The crystallinity
of the loaded drug and the drug release kinetics could be well controlled by FeMCs developed in this method.
研究领域:
材料科学
·
药学
·
纳米技术
✓ 已验证
DOI
高影响因子
RSC Advances
·
2017
·Vol. 7
·期 82
·51831-51837
·
IF 3.108
Yunrui Zhang,Haihong Niu,Xiangjie Zhang,Junxiu Pan,Yang Dong,Haijun Wang,Yongjun Gao
A kind of magnetic N-containing carbon material was synthesized by a simple method using sustainable N-acetyl-D-glucosamine (NAG) and iron nitrate as the raw materials. In C–H oxidation reactions such as the epoxidation of stilbene and styrene, and the oxidation of ethylbenzene, the carbon catalyst exhibited excellent catalytic activity and selectivity for the target products. The superparamagnetic properties at room temperature facilitated catalyst recycling and reusability when it was used as a catalyst. The relationship between the catalytic results and the N 1s XPS analysis indicated that the graphitic N species located in the carbon skeleton was the key accelerating factor which promoted the catalytic C–H oxidation. Density functional theory (DFT) calculations further indicated that the iron species were not an essential factor but they acted as promoters for the catalytic performance of the catalyst. This study will expand the application of biomass-based heteroatom-containing compounds.
研究领域:
材料科学
·
催化
·
可持续化学
·
无机化学
·
理论化学
✓ 已验证
产品关联
DOI
高影响因子
ANALYST
·
2018
·Vol. 144
·期 2
·656-662
·
IF 3.864
Shujuan Zhuo,Yuanyuan Guan,Hui Li,Jing Fang,Ping Zhang,Jinyan Du,Changqing Zhu
In this paper, we have presented a novel strategy to fabricate Fe-doped carbon quantum dots (Fe-CQDs) for dopamine sensing applications. The Fe-CQDs are obtained by one step hydrothermal carbonization, using ethylenediamine tetraacetic acid salts and ferric nitrate as the carbon and iron source, which simultaneously incorporates Fe (dopamine-bonding site) and luminescent carbon quantum dots (fluorophores). The added dopamine containing catechol groups might form complexes with Fe ions (doped in CQDs) due to coordination. Subsequently, dopamine was oxidized to generate dopamine-quinone (a known potent electron acceptor) species by ambient O2. Thus, the coordination induced dopamine in proximity to the CQDs, which provided favourable electron acceptors in close proximity to the CQDs and produced high quenching efficiencies. Such fluorescence responses can be used for well quantifying dopamine in the range of 0.01–50 μM with a detection limit of 5 nM (S/N = 3). The proposed sensing system has been successfully used for the assay of dopamine in human urine samples. Preliminary cell image study indicates that the obtained Fe-CQDs possess high photostability and low cytotoxicity, which make them promising for biological applications.
研究领域:
材料科学
·
分析化学
·
生物医学工程
·
生物化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2014
·
IF 1.552
Guoqiang Song,Zhiqing Wang,Liang Wang,Guoru Li,Minjian Huang,Fengxiang Yin
Effective bifunctional catalysts play a vital role in large-scale commercial applications of rechargeable lithium-air batteries. In this article, a metal-organic framework, MOF(Fe), was prepared by a hydrothermal process using ferric nitrate as the metal ion precursor and trimesic acid as an organic ligand. The structure of the MOF(Fe) was characterized by X-ray diffraction, N 2 adsorption-desorption, Transmission electron microscopy, Fourier transform infrared spectroscopy and Thermo-gravimetric analysis. The activity for the oxygen reduction reaction (ORR) and the kinetic behavior of the ORR using the MOF(Fe) were investigated by cyclic voltammetry and rotating disk electrode voltammetry, respectively, using an alkaline electrolyte. The characterization results showed that the MOF(Fe) was highly crystalline with abundant micropores, large specific surface area and high thermal stability. The MOF(Fe) exhibited excellent catalytic activity for the ORR. The ORR mechanism varies with the applied potentials. The ORR occurs through a two-electron pathway at potentials in the range of −0.30 to −0.50 V, but shifts to four-electron pathway with the potentials in the range −0.50 to −0.95 V. In addition, the MOF(Fe) shows excellent catalytic activity for the oxygen evolution reaction (OER) in an alkaline electrolyte. This work opens a new route for the development of effective non-precious metal catalysts based on MOFs for the ORR and OER.
研究领域:
材料科学
·
电化学
·
催化
·
能源存储
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2022
·Vol. 29
·期 27
·40734-40744
·
IF 5.19
Zhu Bo,Xu Jiangyan,Xu Zhihui,Wu Meisheng,Jiang Hongmei
A facile soft-template solvent thermal strategy was developed to prepare mesoporous carbon–silica composite (MMCS) by using furfuryl alcohol (FA) as carbon precursor, Pluronic copolymer P123 as template, hydrated iron nitrate as iron source, and teraethylorthosilicate as silicon source and it was applied for the removal of methyl orange (MO). The as-synthesized MMCS with abound of hydrophilic groups processed a high specific surface area, large pore volume, and good magnetic response. With the increased amount of FA, the surface area and functional groups increased, promoting the adsorption effect. The maximum adsorption capacity of MO on MMCS can be high to 113.1 mg g −1 at pH 4 with 150 mg L −1 initial MO concentration. The adsorption isotherm, kinetic, and thermodynamics were all studied and the results showed the adsorption process well fitted Langmuir adsorption isotherm and pseudo-second-order model. Additionally, it was shown that the adsorption process could not be interfered by the co-existence of PO 4 3− , NO 3 − , CO 3 2− , SO 4 2− , and real water matrix. And the proposed adsorbent can remove MO in three practical water samples with satisfied removal rates ranging from 92.8 to 99.8%. Thus, the MMCS prepared in this study could be utilized as an alternative adsorbent for the removal of methyl orange from practical aqueous solution.
研究领域:
材料科学
·
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry B
·
2022
·Vol. 10
·期 18
·3434-3443
·
IF 7.571
Xuemei Li,Zhiwei Liu,Yongri Liang,Li-Min Wang,Ying Dan Liu
A conductive hydrogel P(AAm-co-AA)/CS-Fe3+ with double cross-linked networks was fabricated using a one-step polymerization by UV irradiation and a soaking process in Fe(NO3)3 solution. In this hydrogel, the rigid chain of chitosan (CS) and the soft chain of copolymer P(AAm-co-AA) with acrylic acid (AA) and acrylamide (AAm) act as the backbone, among which large amounts of hydrogen bonds are formed by the amino, hydroxyl, and carboxyl groups on the two polymers. Ferric irons (Fe3+) are introduced and form coordination interactions with carboxyl and amino groups of the polymers. The double cross-linked interactions in the system can enhance the tensile strength and toughness of the hydrogel. Thus, the prepared P(AAm-co-AA)/CS-Fe3+ hybrid network hydrogel shows excellent mechanical properties in many aspects: a strength of up to 550 kPa, a broad strain-range up to 800%, fast self-recovery ability (30 min), and low hysteresis strain (<100%). The conductive hydrogel demonstrates high strain sensitivity (gauge factor (GF) = 6.6 at a strain of 700%) as a flexible sensor. Human movements (for example, finger bending, vocal cord vibration, and other human activities) can be sensitively detected using the P(AAm-co-AA)/CS-Fe3+ hydrogel sensor.
研究领域:
材料科学
·
传感器技术
·
纳米技术
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）