Maleated glycidyl 3-pentadecenyl phenyl ether with styrene: synthesis and application as compatibilizer in SBR/silica composite
Maleated glycidyl 3-pentadecenyl phenyl ether with styrene (MGS) was synthesized from glycidyl 3-pentadecenyl phenyl ether (GPPE), maleic anhydride (MAH) and styrene (St) in the presence of AIBN initiator at 80°C, and then the resultant MGS was applied as a compatibilizer to prepare SBR/silica composites. Meanwhile, the commercial compatibilizer bis-(triethoxysilylpropyl) tetrasulfide (named Si69) added into composite was also prepared for comparison purpose. The synthetic MGS structure was characterized by GPC and FTIR, and SBR/silica compounds with different compatibilizer were analyzed using RPA, DMA and so on. The results showed that M̄n and M̄w of MGS were 19,538 g/mol and 23,790 g/mol, respectively. The curing time of compounds with MGS increased, whereas the maximum and minimum torques decreased. The addition of MGS decreased Payne effect of SBR/silica compounds, which implied an improvement of silica dispersion in the compounds. Bound rubber content of compound with MGS was about 1.7 times higher than the absence and 1.5 times higher than that with Si69. The tensile strength of the composites was improved by increasing compatibilizer loading, and the optimum value was observed at 6 phr of MGS. Meanwhile the use of MGS can improve the anti-aging property of composite. According to DMA, the tanδ value at 0°C of composite with MGS was higher than composite without compatibilizer suggesting that MGS can improve the wet skid resistance of composite. The SEM analysis revealed that introduction of MGS enhanced the compatibility between SBR and silica. Copyright © 2015 John Wiley & Sons, Ltd.
危险品化学品经营许可证（带存储）