Surfaces and Interfaces
·
2024
·
IF 5.7
Fen Zhang,Shuyu He,Luyao Xi,Liying Ma,Liwen Zhang,Ling Xiong,Shaohua Chen,Benjun Xi
Reduction of Cr(VI) to Cr(III) or elimination of Cr(VI) from aqueous environments is the most commonly used method to address Cr(VI) contamination. Waste molasses (WM) is a by-product from the sugar industry, if discharged arbitrarily without treatment can lead to waste of resources and cause serious environmental pollution . In this study, the modification of polypyrrole (PPy) with WM (PPy/WM) not only provided PPy with good dispersibility and higher specific surface area, but it can also enrich the functional groups on the surface of PPy. The findings indicated that PPy/WM composites can serve as superior adsorbent materials for highly efficient and selective removal of Cr(VI) when different interfering ions are present. e.g., 150 mg/L of Cr(VI) can be eliminated completely within 6 h under the condition of PPy/WM amount of 0.8 g/L, temperature of 303 K, and pH of 2.0. PPy/WM showed excellent performance for removal of Cr(VI) in a wide pH range (2.0 - 10.0). PPy/WM exhibited excellent reusability for five cycles without obvious loss of its adsorption capacity. The maximum Cr(VI) adsorption capacity of PPy/WM was 662.25 mg/g at 323 K, evidently higher than that of unmodified PPy (194.17 mg/g). Cr(VI) removal by PPy/WM was chiefly accomplished by electrostatic adsorption, ion exchange and in-site reduction. This study not only provides a new technology for efficient adsorption and in-situ reduction of Cr(VI), but also realizes the resource utilization of WM and solves the WM pollution problems.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Processes
·
2022
·Vol. 10
·期 5
·891
·
IF 3.352
Lu Liang,Min Xu,Lei Pan,Zhijiang Zhou,Ye Han
Sugarcane molasses is an agricultural by-product containing sucrose. In this study, the exopolysaccharide (M-EPS) produced byLeuconostoc citreumB-2 in molasses-based medium was characterized, optimized, and its application in set yogurt was investigated. The structure analysis, including gel permeation chromatography, Fourier transform infrared spectroscopy, and nuclear magnetic resonance, revealed that the M-EPS was a linear dextran composed of D-glucose units, which were linked by α-(1→6) glycosidic bonds with 19.3% α-(1→3) branches. The M-EPS showed a lower molecular weight than that produced from sucrose. The M-EPS was added into the set yogurt, and then the water holding capacity, pH, and microstructure of set yogurt were evaluated. Compared with the controls, the addition of M-EPS improved the water holding capacity and reduced the pH of set yogurt. Meanwhile, the structure of the three-dimensional network was also observed in the set yogurt containing M-EPS, indicating that M-EPS had a positive effect on the stability of set yogurt. The results provide a theoretical basis for the cost-effective utilization of sugarcane molasses.Keywords:exopolysaccharide;molasses;structure;optimization;set yogurt
研究领域:
食品科学
·
微生物学
·
化学
✓ 已验证
DOI
高影响因子
BIOPROCESS AND BIOSYSTEMS ENGINEERING
·
2016
·Vol. 39
·期 12
·1867-1875
·
IF 1.901
Chen Ben,Tian Xiaofei,Yu Lian,Wu Zhenqiang
Pigments in molasses wastewater (MWW) effluent, such as melanoidins, were considered as kinds of the most recalcitrant and hazardous colorant contaminants to the environment. In this study, de-coloring the MWW by a synergistic combination of micro-electrolysis with bio-treatment was performed. Aiming to a high de-colorization yield, levels of nutrition source supplies, MWW dilution ratio, and micro-electrolysis reaction time were optimized accordingly. For a diluted (50 %, v/v) MWW, an maximum overall de-colorization yield (97.1 ± 0.5 %, for absorbance at 475 nm) was achieved through the bio-electrolysis treatment. In electrolysis bio-treatment, the positive effect of micro-electrolysis was also revealed by a promoted growth of fungal biomass as well as activities of ligninolytic enzymes. Activities of lignin peroxidase, manganese peroxidase, and laccase were promoted by 111.2, 103.9, and 7.7 %, respectively. This study also implied that the bio-treatment and the micro-electrolysis had different efficiencies on removal of pigments with distinct polarities.
研究领域:
环境科学
·
微生物学
✓ 已验证
DOI
PubMed
高影响因子
PLoS One
·
2014
·Vol. 9
·期 6
·e100731
·
IF 3.534
Ke Xu,Ping Xu
Lactic acid is an important chemical with various industrial applications, and it can be efficiently produced by fermentation, in which Bacillus coagulans strains present excellent performance. Betaine can promote lactic acid fermentation as an effective osmoprotectant. Here, positive effect of betaine on fermentation by B. coagulans is revealed. Betaine could enhance lactic acid production by protecting l -LDH activity and cell growth from osmotic inhibition, especially under high glucose concentrations and with poor organic nitrogen nutrients. The fermentation with 0.05 g/L betaine could produce 17.9% more lactic acid compared to the fermentation without betaine. Beet molasses, which is rich in sucrose and betaine, was utilized in a co-feeding fermentation and raised the productivity by 22%. The efficient lactic acid fermentation by B. coagulans is thus developed by using betaine and beet molasses.
研究领域:
微生物学
·
生物工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2020
·
IF 6.551
Xiaorong Song,Chenglin Li,Zhihui Chai,Yuan Zhu,Yuling Yang,Manyi Chen,Ruijia Ma,Xinquan Liang,Junhua Wu
In this study, diatomite was refined by a simple purification method consisting of calcination combined with acid washing. Optimal purification conditions were the focus, including the influence of conditions on diatomite morphology, structure, and specific surface area. The results showed that the optimal conditions were a 550 °C carbonization temperature and 25 wt% HCl. This purified diatomite was then employed to adsorb gallic acid (GA) from molasses wastewater in a series of adsorption experiments, which illustrated that (ḭ) GA adsorption fitted a pseudo-second-order model and the Freundlich equation better with GA adsorption by purified diatomite; (ḭḭ) the adsorption process was physical, nonspontaneous, and endothermic; (ḭḭḭ) the maximum GA adsorption capacity by purified diatomite was 19.852 mg g −1 . This study reported the examination of a promising material for sugar mill wastewater pretreatment .
研究领域:
环境科学
·
化学工程
✓ 已验证
DOI
PubMed
高影响因子
Scientific Reports
·
2016
·Vol. 6
·期 1
·1-11
·
IF 5.228
Dan Jiang,Fang Zhen,Chin Siew-xian,Tian Xiao-fei,Su Tong-chao
Biohydrogen production has received widespread attention from researchers in industry and academic fields. Response surface methodology (RSM) was applied to evaluate the effects of several key variables in anaerobic fermentation of glucose with Clostridium butyrium and achieved the highest production rate and yield of hydrogen. Highest H 2 yield of 2.02 mol H 2 /mol-glucose was achieved from 24 h bottle fermentation of glucose at 35 °C, while the composition of medium was (g/L): 15.66 glucose, 6.04 yeast extract, 4 tryptone, 3 K 2 HPO 4 , 3 KH 2 PO 4 , 0.05 L-cysteine, 0.05 MgSO 4 ·7H 2 O, 0.1 MnSO 4 ·H 2 O and 0.3 FeSO 4 ·7H 2 O, which was very different from that for cell growth. Sugarcane bagasse and Jatropha hulls were selected as typical tropical biomass wastes to produce sugars via a two-step acid hydrolysis for hydrogen production. Under the optimized fermentation conditions, H 2 yield (mol H 2 /mol-total reducing sugar) was 2.15 for glucose, 2.06 for bagasse hydrolysate and 1.95 for Jatropha hull hydrolysate in a 3L fermenter for 24 h at 35 °C, with H 2 purity of 49.7–64.34%. The results provide useful information and basic data for practical use of tropical plant wastes to produce hydrogen.
研究领域:
微生物学
·
可再生能源
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Xue-fang Chen,Hai-long Li,Xu-ran Ji,Zhi-jie Shen,Hai-jun Guo,Shi-miao Yao,Meng-kun Wang,Lian Xiong,Xin-de Chen
Sugarcane molasses is a by-product in the process of sugar production, which has characteristics of large quantity, low price and easy to pollute the environment. High-valued utilization of sugarcane molasses has important research significance. In this work, 5-hydroxymethylfurfural (HMF) was obtained through hydrolyzing sugarcane molasses, and was separated from the hydrolysate by a designed hyper-cross-linked adsorption resin (HCLR). The optimal conditions for adsorption/desorption of HMF by HCLR were obtained. On this basis, the adsorption kinetics, equilibrium and thermodynamic behavior of HMF onto HCLR were studied, and the adsorption mechanism of HMF onto HCLR was clarified. At last, HMF with a highest purity of 96.0% and an average purity of 93.2% were obtained through fixed bed dynamic adsorption/desorption study. Overall, this work provides a complete process route from sugarcane molasses to high-value product of HMF, and provides theoretical and technical references for the efficient and comprehensive utilization of sugarcane molasses resources.
研究领域:
化学工程
·
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2025
·
IF 9
Xin Jin,Sumeng Wang,Yaping Gao,Qingsheng Qi,Quanfeng Liang
Background The industrial production of L-threonine faces challenges because of high production costs, especially those of substrates, meaning new production methods are needed. Methods Fur, a new global transcription factor related to L-threonine biosynthesis, was discovered in this study. Multidimensional regulation combined with global transcriptional machinery engineering was used to modify an Escherichia coli strain. Results: The most efficient mutant showed high titer (154.2 g/L), productivity (2.14 g/L/h), and yield (0.76 g/g) of L-threonine production. These three parameters indicated that these engineering strategies were economically feasible for developing high L-threonine-producing strains. We integrated the sucrose utilization gene cluster into the genome to further reduce the production cost of L-threonine. Using untreated cane molasses as the substrate, L-threonine was successfully produced with a titer of 92.46 g/L and a cost reduction of 48 %. Conclusion This research offers advantages for industrial scalability, and the resulting engineered bacterium holds significant industrial application potential.
研究领域:
生物工程
·
微生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2019
·
IF 7.015
Qiangjian Yang,Jianquan Luo,Shiwei Guo,Xiaofeng Hang,Xiangrong Chen,Yinhua Wan
Clarification operations are vital to extract high-quality products from cane molasses. Ultrafiltration (UF) is very efficient for this purpose, although membrane fouling limits its large-scale application. In this work, five commercially available polyethersulfone UF membranes were evaluated for the clarification of molasses, whereby 30–100 kDa membranes were found to be the most suitable for this purpose. In order to minimise fouling formation during molasses clarification, the threshold flux concept was for the first time applied to dilution–concentration membrane processes. The threshold flux in concentration mode could be determined by correlating the average transmembrane pressure, average fouling rate, and specific energy consumption with the permeate flux at the same feed. An optimal dilution factor of eight was found based on such threshold flux concept and, only above the threshold flux, higher retentate concentrations and longer concentration times resulted in obvious fouling aggravation. Moreover, polydopamine coating and subsequent polymer (polyethyleneimine, chitosan oligosaccharide , alginate dialdehyde) grafting were used to tune the membrane surface properties to further control the membrane fouling. It was found that membranes modified with positive charges were more prone to molasses fouling, where the effect of the membrane surface properties on fouling was significant only above the threshold flux. However, pore narrowing after surface modification may increase the foulant retention and accumulation on the membrane, thus exerting certain influence on the threshold flux. The threshold flux value for the clarification of molasses with 50 and 100 kDa UF membranes was found to be 27–32 L m −2 h −1 . The outcome of this work not only provides a guide to study threshold fluxes for industrial fluids at high concentrations, but also clarifies the effect of surface modification on the concentration polarisation/fouling formation during the clarification of cane molasses.
研究领域:
化学工程
·
环境工程
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2017
·
IF 4.529
Lingtian Wu,Shanshan Wu,Juanjuan Qiu,Chuanxue Xu,Sha Li,Hong Xu
A green process and environmentally benign process is highly desirable in the development of enzymatic catalysis. In this work, the shuttle plasmid pHA01 was constructed and the sucrose isomerase (SIase) was expressed in Bacillus subtilis WB800. The optimal nitrogen and carbon sources for SIase expression were yeast extract (15 g/L) and un-pretreated cane molasses (UCM, 20 g/L), respectively. After the UCM fed, the whole cell activity reached 5.2 U/mL in a 7.5 L fermentor. Optimum catalytic temperature and pH of whole cell were 35 °C and 5.5, respectively. Although the biologic membrane reactor (BMR) system consecutively worked for 12 batches, the sucrose conversion remained higher than 90%, indicating the BMR system had a greater operational stability. Furthermore, isomaltulose production using the BMR system with low-cost cane molasses as its substrate not only reduces the production cost and mediates environmental pollution, but also solves the genetic background problem of the non-food-grade strains.
研究领域:
生物技术
·
酶工程
·
可持续化学
·
微生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Lulu Liu,Xiangrong Chen,Shichao Feng,Yinhua Wan,Jianquan Luo
Application of nanofiltration membranes in industries still has to contend with membrane fouling that causes a significant loss of separation performance. Herein, an innovative approach to design antifouling membranes with a narrowed pore size distribution by interfacial polymerization (IP) assisted by silane coupling agents is reported. An aqueous solution of piperazine anhydrous (PIP) and γ-(2,3-epoxypropoxy) propytrimethoxysilane (KH560) is employed to perform IP with an organic solution of trimesoyl chloride and tetraethyl orthosilicate (TEOS) on a porous support. In accordance with the results of molecular dynamics and dissipative particle dynamics simulations, the reactive additive KH560 accelerates the diffusion rate of PIP to enrich at the reaction boundary. Moreover, the hydrolysis/condensation of KH560 and TEOS at the aqueous/organic interface forms an interpenetrating network with the polyamide network, which regulates the separation layer structure. The characterization results indicate that the polyamide–silica membrane has a denser, thicker, and uniform separation layer. The mean pore size of the polyamide–silica membrane and the traditional polyamide membrane is 0.62 and 0.74 nm, respectively, and these correspond to the geometric standard deviation (namely, pore size distribution) of 1.39 and 1.97, respectively. It is proved that the narrower pore size distribution endows the polyamide–silica membrane with stronger antifouling performance (flux decay ratio decreases from 18.4 to 3.8%). Such a membrane also has impressive long-term antifouling stability during cane molasses decolorization at a high temperature (50 °C). The outcomes of this study not only provide a novel one-step multiple IP strategy to prepare antifouling nanofiltration membranes but also emphasize the importance of pore size distribution in fouling control for various industrial liquid separations.
研究领域:
材料科学
·
化学工程
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FOOD SCIENCE AND BIOTECHNOLOGY
·
2025
·
IF 3.1
Nho Soo Bin,Do Sang-Hun,Oh Seongjin,Park Yong-Cheol,Kim Sun-Ki
This study aimed to develop a non-genetically modified organism (non-GMO) Saccharomyces cerevisiae strain with enhanced glutathione production using UV-induced random mutagenesis. Among 30 wild-type strains, S. cerevisiae KACC 48331 was selected for its high glutathione production. A #14 mutant with significantly higher glutathione content was isolated via acrolein resistance screening. Optimal batch fermentation was established at 20 °C and pH 4.5 using a cost-effective medium of molasses and corn steep liquor (CSL). In fed-batch fermentation, the #14 mutant achieved 1.98 g/L of glutathione using molasses and CSL as carbon and nitrogen sources, comparable to yields from expensive complex media containing peptone and yeast extract. Notably, over 99% of the glutathione produced was in the reduced, biologically active form. These results demonstrate the feasibility of using non-GMO yeast and industrial by-products for sustainable and economical glutathione production.
研究领域:
生物技术
·
微生物发酵
·
工业微生物学
·
代谢工程
·
应用微生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）