INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2020
·
IF 5.162
Wei Liu,Xiaoyu Li,Si Wang,Fengjun Fang,Xiao Wang,Qingxi Hou
Research on nanocomposite film from natural polymers such as cellulose and chitosan is of great importance to promote the development and highly efficient utilization of green and renewable bioresources. In this study, enzymatic pretreatment cellulose nanofibril (ETCNF) derived from licorice residues was prepared, and further processed into nanocomposite film with addition of chitosan nanofibril (CHN). This study focused on the effects of CHN dosage on the main properties of resultant nanocomposite film in terms of crystallinity, thermal stability , light transmittance, hydrophobicity , mechanical properties, and antibacterial activity . The results showed that ETCNF/CHN nanocomposite film exhibited good hydrophobicity especially at higher dosage of CHN, good light transmittance and mechanical properties (tensile strain can reach 39.6 MPa for ETCNF/CHN-10.0%). The as-prepared ETCNF/CHN nanocomposite film also showed good antibacterial activity against Escherichia coli . It was expected that the ETCNF/CHN nanocomposite film would help to realize transformation and high value-added utilization of these biomass residues.
研究领域:
材料科学
·
生物技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Si Wang,Xiao Wang,Wei Liu,Liguo Zhang,Hao Ouyang,Qingxi Hou,Kejing Fan,Jinsong Li,Pengtao Liu,Xinliang Liu
It is important to make full utilization of industrial biomass residues. Pulp was prepared from licorice residues by soda-anthraquinone pulping followed by peroxyacetic acid bleaching. Cellulose nanofibril was obtained by enzymatic pretreatment followed by homogenization of the pulp (ETCNF). The effects of enzymatic pretreatment on ETCNF were investigated. Chitosan nanofibril (CHN) and lignin nanoparticles (LNPs) were prepared and used for ETCNF composites, respectively. The results showed that ETCNF exhibited clear nanofibrillar structure and a highly relative colloidal stability, and a much higher crystallinity index and thermal stability compared to TEMPO-medicated oxidized one; the cellulose composite films incorporated with CHN or LNPs exhibited good thermal stability and hydrophobicity. Compared with ETCNF film, ETCNF@LNPs-5.0% film showed higher UV-blocking ability and thermal stability, but reduced light transmittance, while ETCNF@CHN-5.0% film showed improved mechanical properties and similar light transmittance. This study would expend licorice residues as potential materials for CNF and its applications.
研究领域:
材料科学
·
生物技术
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2022
·
IF 6.449
Yachong Zhu,Yehong Chen,Chaojun Wu,Dongmei Yu,Qijun Ding,Ronggang Li
In this study, cellulose nanofibrils (CNFs) were directly prepared after autohydrolysis of eucalyptus raw materials. The effect of different autohydrolysis times on the hydrogen bond structure, micro-structure and properties of CNFs were analyzed by FTIR peak fitting, two-dimensional infrared, TGA, TEM and X-ray diffractometer. The results showed that the autohydrolysis treatments could obviously lead to the sequence of hydrogen bond changes in CNFs as follows: v (weak hydrogen bond) > v (free hydroxyl) > v (O(3)H.O(5)) > v (O(2)H.O(6)) > v (O(6)H.O(3′)), and further impact in crystallite size of CNFs. With the increase of the autohydrolysis strength, the crystallite size of CNFs on the 1 1 ¯ 0 crystal plane could be reduced by up to 26%, but the crystallite size on the 110 crystal plane and the 200 crystal plane increased by 24.5% and 22.6%, respectively. These microstructure changes finally increased the crystallinity index of CNFs, and then resulted in their high thermal stability.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2024
·
IF 5.6
Jierui Ye,Qingtian Xu,Yuebing Gao,Yipeng Liang,Qiang Wu,Guomin Wu,Siqun Wang,Pan Chen,Qian Li
Naturally occurring cellulose nanofibril (CNF) is a major component of plant cell walls and possesses numerous advantages, including a high specific surface area, exceptional strength, abundant availability, renewability, and biodegradability. However, the inherent ignitability of CNF hinders its practical application in advanced functional materials. Herein, we report a novel ternary deep eutectic solvent, designed under mild mechanical grinding, capable of converting cheap bamboo cellulose into phosphorylated cellulose nanofibrils (PCNFs) uniform fibril diameters in the range of 3 − 10 nm. The pure PCNF-fabricated film exhibited excellent flame-retardant and self-extinguishing performances (with a high limiting oxygen index of 70.2%) without adding flame-retardants. Compared with unmodified CNF, the peak heat release rate and total heat release of the PCNF films decreased by 96.7% and 96.9%, respectively. Furthermore, defibrillation significantly improved the mechanical and optical properties of the PCNF films, suggesting considerable potential for applying PCNFs in flame-retardant packaging materials.
研究领域:
材料科学
·
化学工程
·
生物质能
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MEMBRANE SCIENCE
·
2018
·
IF 6.578
Xiong-Fei Zhang,Yi Feng,Zhongguo Wang,Mingmin Jia,Jianfeng Yao
Incorporating metal-organic frameworks into cellulose matrix to prepare composite membranes is promising in gas-separation applications. In this study, UiO-66-NH 2 (Zr-based MOF) nanoparticles are wrapped into the densely packed cellulose nanofibrils (CNF-COOH) via a facile vacuum filtration process. The existence of acid-base interactions and electrostatic forces between UiO-66-NH 2 and CNF-COOH renders ideal interfacial morphology. Results show that UiO-66-NH 2 is cross-linked by -COOH groups and well-dispersed in the CNF matrix. The porous UiO-66-NH 2 strengthens the diffusion process of CO 2 molecules, thus elevating the permeation flux and separation factor simultaneously. The optimum separation performance is achieved over CM-1 membrane with a CO 2 permeability of 139 Barrer and a CO 2 /N 2 selectivity ratio of 46.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2019
·
IF 6.044
Xu Liu,Yang Wang,Zheng Cheng,Jie Sheng,Rendang Yang
Bacterial cellulose is an attractive material due to its outstanding biocompatibility, nanometer size and high purity, but the difficulty of dispersing has restricted its wide applications. In this study, chitosan was grafted onto bacterial cellulose by Schiff base reaction, and then obtained the nano-sized fibrils by ultrasonic dispersion process. Different concentrations of NaIO 4 with various time and temperature were applied, and the maximum grafting amount of chitosan was 12.38%. The obtained products were characterized by FTIR, XRD, SEM and TEM. From the dispersibility and stability behavior research, the suspension containing chitosan was more uniform and showed better acid and temperature stability. It can also be observed in SEM and TEM images that the bacterial cellulose were dispersed into single ones and the diameter of the isolated fibril was 30–80 nm.
研究领域:
材料科学
·
生物医学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanoscale
·
2022
·Vol. 14
·期 40
·14902-14912
·
IF 8.307
Kun Liu,Haishun Du,Wei Liu,Meng Zhang,Yaxuan Wang,Huayu Liu,Xinyu Zhang,Ting Xu,Chuanling Si
Flexible and light weight electromagnetic interference (EMI) shielding materials with high electromagnetic shielding efficiency (SE) and excellent mechanical strength are highly demanded for wearable and portable electronics. In this work, for the first time, a freestanding and flexible cellulose nanofibril (CNF)/PEDOT:PSS/MXene (Ti3C2Tx) nanocomposite film with a ternary heterostructure was manufactured using a vacuum-assisted filtration process. The results show that compared with pure MXene films, the tensile strength of the optimized nanocomposite film increases from 8.88 MPa to 59.99 MPa, and the corresponding fracture strain increases from 0.87% to 4.60%. Intriguingly, the optimized nanocomposite film exhibited an impressive conductivity of 1903.2 S cm−1, which is among the highest values reported for MXene and cellulose-based nanocomposites. Owing to the superior conductivity and unique heterostructure, the nanocomposite film exhibits a high EMI SE value of 76.99 dB at a thickness of only 58.0 μm. Taking into account the robust mechanical properties and remarkable EMI shielding performance, the CNF/PEDOT:PSS/MXene nanocomposite film could be a prospective EMI shielding material for a variety of high-end applications.
研究领域:
材料科学
·
电子工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2024
·
IF 10.7
Dejian Zhang,Zhiqiang Fang,Shuiqing Hu,Xueqing Qiu
Cellulose nanofibril (CNF) films with both high strength and high toughness are attractive for applications in energy, packaging, and flexible electronics. However, simultaneously achieving these mechanical properties remains a significant challenge. Herein, a multiscale structural optimization strategy is proposed to prepare high aspect ratio CNFs with reduced crystallinity for strong and tough films. Carboxymethylation coupled with mild mechanical disintegration is employed to modulate the multiscale structure of CNFs. The as-prepared CNFs feature an aspect ratio of >800 and a crystallinity of <60 %. The film prepared using CNFs with a high aspect ratio (~1100) and reduced crystallinity (~54 %) exhibits a tensile strength of 229.9 ± 9.9 MPa and toughness of 22.2 ± 1.4 MJ/m 3 . The underlying mechanism for balancing these mechanical properties is unveiled. The high aspect ratio of the CNFs facilitates the transfer and distribution of local stress, thus endowing the corresponding film with high strength and toughness. Moreover, the low crystallinity of the CNFs permits the movement of the cellulose chains in the amorphous regions, thereby dissipating energy and finally increasing the film toughness. This work introduces an innovative and straightforward method for producing strong and tough CNF films, paving the way for their broader applications.
研究领域:
材料科学
·
生物材料
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2020
·Vol. 27
·期 7
·3789-3804
·
IF 4.21
Xu Wenlong,Xin Binjie,Yang Xue
Polyacrylonitrile (PAN)/cellulose nanofibril (CNF) based carbon nanofiber membranes were produced by electrospinning and carbonization method, in which the CNF amount was 1 wt%. In order to control the spinning process, the rheological properties of the PAN/CNF suspensions were measured before electrospinning. In addition, the effects of CNF particle size on the structure and properties of carbon nanofiber membranes were investigated systematically by SEM, FTIR and mechanical test. Meanwhile, the reaction mechanism of PAN and PAN/CNF nanofiber membranes in the process of stabilization and carbonization was also fully discussed. The results show that the addition of CNFs can improve the breaking strength and conductivity of PAN carbon nanofiber membrane. Moreover, CNFs also can accelerate the carbonization rate and reduce the reaction conditions of PAN nanofiber membranes. Therefore, CNFs are effective enhancers for PAN based carbon nanofiber membranes.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2021
·
IF 9.381
Jie Zhou,Zhiqiang Fang,Jinyi Cui,Xiao Zhang,Yong Qian,Weifeng Liu,Dongjie Yang,Xueqing Qiu
The simultaneous attainment of high strength and high toughness of transparent cellulose nanofibril (CNF) film can expedite its uses in advanced applications. In this work, a wood-inspired strategy is proposed to address the conflict between strength and toughness by using natural derived lignosulfonic acid (LA) as a reinforcing additive. Only 1 wt% LA addition can double the toughness (11.0±1.3 MJ/m 3 ) of pure CNF film. Consequently, the as-prepared CNF/LA-1 nanocomposite film not only exhibits superior mechanical properties (23.6±1.3 MJ/m 3 toughness, 249±6 MPa strength, and 15.4±1.4 % strain), but also maintains an excellent optical transparency of 91.2 % (550 nm). Furthermore, the mechanism for simultaneously enhancing strength and toughness is essentially attributed to the improved hydrogen bonding between CNF-OH and LA-SO 3 H and effective energy dissipation system. This work provides a green and effective approach to prepare strong yet tough and transparent biodegradable CNF film for high-end applications.
研究领域:
材料科学
·
生物质工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2023
·Vol. 13
·期 15
·10204-10214
·
IF 3.9
Meilin Li,Bei Jiang,Shuoang Cao,Xinyi Song,Yuanqiao Zhang,Lijun Huang,Quanping Yuan
High-performance flexible barium titanate (BaTiO3)-based piezoelectric devices have gained much attention. However, it is still a challenge to prepare flexible polymer/BaTiO3-based composite materials with uniform distribution and high performance due to the high viscosity of polymers. In this study, novel hybrid BaTiO3 particles were synthesized with assistance of TEMPO-oxidized cellulose nanofibrils (CNFs) via a low-temperature hydrothermal method and explored for their application in piezoelectric composites. Specifically, Ba2+ was adsorbed on uniformly dispersed CNFs with a large amount of negative charge on their surface, which nucleated, resulting in the synthesis of evenly dispersed CNF-BaTiO3. The obtained CNF-BaTiO3 possessed a uniform particle size, few impurities, high crystallinity and dispersity, high compatibility with the polymer substrate and surface activity due to the existence of CNFs. Subsequently, both polyvinylidene fluoride (PVDF) and TEMPO-oxidized CNFs were employed as piezoelectric substrates for the fabrication of a CNF/PVDF/CNF-BaTiO3 composite membrane with a compact structure, displaying the tensile strength of 18.61 ± 3.75 MPa and elongation at break of 3.06 ± 1.33%. Finally, a thin piezoelectric generator (PEG) was assembled, which output a considerable open-circuit voltage (4.4 V) and short-circuit current (200 nA), and could also power a light-emitting diode and charge a 1 μF capacitor to 3.66 V in 500 s. Its longitudinal piezoelectric constant (d33) was 5.25 ± 1.04 pC N−1 even with a small thickness. It also exhibited high sensitivity to human movement, outputting a voltage of about 9 V and current of 739 nA for only a footstep. Thus, it exhibited good sensing property and energy harvesting property, presenting practical application prospects. This work provides a new idea for the preparation of hybrid BaTiO3 and cellulose-based piezoelectric composite materials.
研究领域:
材料科学
·
能源工程
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2020
·Vol. 28
·期 1
·273-288
·
IF 4.21
Lu Beili,Lin Qiang,Yin Zhu,Lin Fengcai,Chen Xuerong,Huang Biao
Robust and ultralight biofoams had been successfully prepared using readily available and biocompatible cellulose nanofibrils (CNFs) as the matrix. The γ-glycidoxypropyltrimethoxysilane (GPTMS) was first added into the CNFs suspension to act as a crosslinker to form covalent linkages between cellulose chains. Then the gelatin was incorporated into the networks via reacting with the epoxy groups on GPTMS and forming hydrogen bonding with CNFs. The content of gelatin had a significant influence on the properties of the obtained foams. With the introduction of a small amount of gelatin, the foams exhibited significantly enhanced mechanical properties and stability in water in comparison with the CNF foams without GPTMS and/or gelatin. The foams containing the appropriate ratio of gelatin to CNFs possessed the high porosity (99.16%), ultralow density (0.0077 g/cm 3 ), good mechanical properties, and abundant functional groups (hydroxyl and carboxylate groups). These features made it an ideal adsorbent toward methylene blue (MB) and the maximum adsorption capacity could reach up to 430.33 mg/g. Additionally, the cationic MB could be removed from the mixed cationic/anionic dye solutions with high selectivity, possibly due to the strong electrostatic interactions between MB and the adsorbent. Furthermore, the recycling test demonstrated the good reusability of this biofoam. Therefore, this work provides an environmentally benign method to fabricate robust CNF-based foams, which can be considered as green adsorbents for the treatment of water pollutants.
研究领域:
材料科学
·
环境科学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）