BIORESOURCE TECHNOLOGY
·
2024
·
IF 9.7
Zichao Hu,Longfei Tang,Peipei Gao,Bin Wang,Chang Zhang,Yue Sheng,Weitong Pan,Lu Ding,Xueli Chen,Fuchen Wang
Plastics and paper are common components of municipal solid waste (MSW), making an in-depth understanding of their interactions essential for MSW thermal conversion. In this study, the co-pyrolysis behavior of plastic and paper was investigated. Firstly, the thermal decomposition characteristics were analyzed. Secondly, the pyrolytic behavior was elucidated in a fixed-bed reactor. Thirdly, the impact of plastic melting on co-pyrolysis was clarified. Results indicated that the thermal decomposition was accelerated between 250 °C and 283 °C, while temperatures above 400 °C resulted in inhibition. During fixed-bed pyrolysis, char yields (70.7–16.9 %) were increased by 4.0 %–12.7 %. This increase was mainly due to plastic melting, which contributed 8.6 % and increased aliphatic carbon content. Besides, PVC and PET exhibited a broader melting range > 500 °C. Bio-oil yields (25.5–70.6 %) were reduced by 3.4 %–12.4 %, primarily affecting aliphatic compositions. Gas yields (3.8–6.5 %) were reduced < 400 °C but increased with temperature, involving primarily H 2 , CH 4 , C 2 H 4 , and C 2 H 6 .
研究领域:
环境科学
·
能源工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2024
·Vol. 29
·期 8
·1834
·
IF 4.2
Mengruo Wu,Le Mu,Zhiyue Zhang,Xiangna Han,Hong Guo,Liuyang Han
Tetraethoxysilane (TEOS) is the most commonly used silicon-based reinforcement agent for conserving art relics due to its cost-effectiveness and commercial maturity. However, the resulting silica gel phase is prone to developing cracks as the gel shrinks during the sol–gel process, potentially causing severe damage to the objects being treated. In this study, dodecyltrimethoxysilane (DTMS) was introduced into TEOS to minimize this shrinkage by adding elastic long chains to weaken the capillary forces. The gel formed from the DTMS/TEOS hybrid material was transparent and crack-free, featuring a dense microstructure without mesopores or micropores. It exhibited excellent thermal stability, with a glass transition temperature of up to 109.64 °C. Evaluation experiments were conducted on artificially aged, handmade bamboo paper. The TEOS-based hybrid material effectively combined with the paper fibers through the sol–gel process, polymerizing into a network structure that enveloped the paper surface or penetrated between the fibers. The surface of the treated paper displayed excellent hydrophobic properties, with no significant changes in appearance, color, or air permeability. The mechanical properties of the treated bamboo paper improved significantly, with longitudinal and transverse tensile strengths increasing by up to 36.63% and 44.25%, respectively. These research findings demonstrate the promising potential for the application of DTMS/TEOS hybrid materials in reinforcing paper relics.
研究领域:
文物保护
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NORDIC PULP & PAPER RESEARCH JOURNAL
·
2021
·Vol. 36
·期 3
·503-511
·
IF 1.04
Yazhou Xu,Songlin Dai,Liangwu Bi,Yuxiang Chen
A series of tung oil-rosin-based polyester (TRP) used as internal sizing agents were prepared using rosin, tung oil, maleic anhydride, and glycerol. TRP structure and properties were examined using Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC) and gel permeation chromatography (GPC). The TRP latexes were subsequently used as internal sizing agents, and the sizing properties were evaluated using a scanning electron microscope (SEM), a video-based dynamic contact angle measuring device and a Cobb absorbency tester. The optimal conditions for preparing the TRP sizing agent were as follows: the hydroxy-carboxyl ratio of the material was 0.25; the maleic anhydride dosage was 20 % of rosin; and the tung oil dosage was 40 % of rosin. Under the best conditions, the sized paper Cobb-60 was 15.6
g
/
m
2
, the tensile index was 45.1 N·m/g, the burst index was 3.1 kPa·
m
2
/g, and the tear index was 15.6 mN·
m
2
/g.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
NORDIC PULP & PAPER RESEARCH JOURNAL
·
2022
·Vol. 38
·期 1
·87-98
·
IF 1.595
Huijuan Shi,Zhenzhen Chen,Yingping Qi,Hua Li
A novel paper multifunctional protective solution was prepared by mixing berberine modified trimethoprimed carboxymethyl cellulose (TMP-DCMC-BBR), KH-791 modified nano-SiO 2 (KH791-SiO 2 ) and hydroxypropyl starch phosphate (HPDSP), and the mechanical properties, optical properties, antibacterial properties, aging resistance, acid and alkali resistance of the paper coated with the protective solution were investigated. It is shown that the paper coated with the multifunctional protective liquid showed good mechanical properties, and has little influence on optical properties of the paper. At the same time, it had good antibacterial properties, aging resistance and acid and alkali corrosion resistance, and there is no obvious change in paper appearance, no decolorization and ink diffusion, which is in line with the principle of “repairing the old as the old and keeping the original appearance”. Moreover, the compound solution has certain reversibility and can absorb a certain degree of ultraviolet rays, so as to weaken the damage of ultraviolet rays to the paper. It is an ideal multifunctional protective liquid for paper and has broad application prospects in paper protection.
研究领域:
材料科学
·
文物保护
✓ 已验证
DOI
高影响因子
MACROMOLECULAR MATERIALS AND ENGINEERING
·
2020
·Vol. 305
·期 6
·2000063
·
IF 3.853
Yang Mo,Lijun Yang,Wei Hou,Tiantian Zou,Youyu Huang,Ruijin Liao
This study aims to decrease the dielectric constant of kraft paper by 1,2,3,4-butanetetracarboxylic acid (BTCA) esterification crosslinking. Kraft paper samples are treated with various concentrations of BTCA to prepare modified paper with different reaction degrees. Morphology and surface chemical composition are characterized. The dielectric constant and loss of the plain and modified paper are also investigated. Results show that esterification occurs successfully between cellulose molecular chain and BTCA. The intrinsic dielectric constant and loss of 6 g L −1 BTCA-treated paper decrease by 23.5% and 36.3%, respectively, at 50 Hz. The esterification can reduce the hydroxyl amounts on cellulose. The formed crosslinking network between the cellulose chains restricts the cellulose orientation polarization, thereby reducing cellulose polarizability. The electrical strength, mechanical properties, and thermal behavior of the samples are explored to evaluate comprehensively the modifying effect. BTCA esterification crosslinking proves to be a promising method for decreasing the dielectric constant of kraft paper.
研究领域:
材料科学
·
电气工程
✓ 已验证
产品关联
DOI
高影响因子
STARCH-STARKE
·
2024
·
IF 2.6
Shaomin Kang,Jiaqi Guo,Igor S. Makarov,Mohammad Rizwan Khan,Huining Xiao,Junlong Song
Cationic starch serves as a prevalent wet-end additive in the papermaking industry. Yet, the definitive effects of the ratio between the two principal components—amylose (AM) and amylopectin (AP)—and the degree of substitution (DS) on the mechanical strength enhancement of paper sheets remain incompletely understood. This study synthesizes a series of quaternized amylose (QAM) and quaternized amylopectin (QAP) with varying DS levels and blended these derivatives in diverse ratios. Subsequently, these mixtures are integrated into pulp suspensions to ascertain the DS and the AM-to-AP ratio that optimize paper strength. These results indicate that a QAM-to-QAP blend with a DS of 0.08 at a ratio of 2:8 yielded the most pronounced improvement in paper mechanical properties. This precise formulation significantly enhances tensile, burst, and tear strength indices, increasing by approximately 55.0%, 44.4%, and 78.4%, respectively, under the most favorable conditions and with an additive dosage of 1 wt.%. This investigation provides substantive and actionable knowledge for selecting starch additives in the wet-end of papermaking, which can significantly augment the efficiency and efficacy of paper manufacturing processes.
研究领域:
造纸科学
·
材料科学
·
生物化学
✓ 已验证
产品关联
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2022
·
IF 11.889
Shanta Dutta,Qiaozhi Zhang,Yang Cao,Chunfei Wu,Konstantinos Moustakas,Shicheng Zhang,Ka-Hing Wong,Daniel C.W. Tsang
Lignocellulosic paper waste constitutes a major waste stream globally, which should be valorised for chemical production. However, paper properties ( e.g. , feedstock composition, cellulosic crystallinity, and thermal stability/degradability) vary with raw materials and pulping processes. This study investigated levulinic acid (LA), hydroxymethylfurfural (HMF), and furfural production by H 2 SO 4 and FeCl 3 catalysed conversion of nine types of paper wastes in a green solvent system (1:1 γ‐valerolactone/water). At 160–180 °C for 1–20 min, ∼23–27 wt% LA yield was achieved from sanitary papers, tracing/parchment paper, and paper food box mainly containing crystalline cellulose, while a lower LA yield (∼10–20 wt%) was obtained from other paper wastes with high contents of ash and lignin. A higher selectivity towards HMF (∼12 mol%) was achieved in the presence of FeCl 3 . A furfural yield of ∼ 4–7.5 wt% was also obtained from the hemicellulose content. This study elucidates crucial factors and desirable characteristics of paper waste for catalytic valorisation.
研究领域:
化学工程
·
环境科学
·
生物质能
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2014
·
IF 3.916
Kai Liu,Yaoguang Xu,Xinxing Lin,Lihui Chen,Liulian Huang,Shilin Cao,Jian Li
In order to improve the strength property and antimicrobial activity of paper simultaneously, we prepared a novel multifunctional agent based on carboxymethyl cellulose (CMC) by a simple two-stage method. The first stage was the oxidation of CMC to obtain the dialdehyde CMC (DCMC), and the second stage was the graft of guanidine hydrochloride (GH) onto DCMC to obtain DCMC-GH polymer. The strength property and antimicrobial activity of DCMC-GH-coated copy paper have been studied by the tensile test and inhibition zone method, respectively. The results showed that the dry strength index could increase about 20% after the paper was coated with DCMC-GH. The coating of DCMC-GH on paper also resulted in excellent antimicrobial activities against Escherichia coli and Staphylococcus aureus , and the inhibition zone became larger as the GH content grafted on DCMC increased. The novel DCMC-GH polymer would be a multifunctional coating agent for food packaging paper.
研究领域:
材料科学
·
微生物学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CULTURAL HERITAGE
·
2022
·
IF 3.229
Minghao Jia,Xiaoxia Huang,Xiaogang Zhang,Gang Hu
Improving the strength decrease caused by fungal metabolites is still an arduous task in the field of paper materials protection. A set of damaged Kangxi Dictionary from Qing Dynasty was chosen as samples in this work. The main goal of this work is to develop high-efficiency and eco-friendly media with the characteristics of antifungal and reinforcement, to preserve paper materials and continue the historical and scientific research value of cultural heritage. PHMG as an efficient antifungal was used in this work. For better behavior, the epoxy group of KH560 can be induced by the amino group in PHMG by ring opening reaction to form PHMG-KH560 colloidal complex. Spraying PHMG-KH560 on paper could establish Si-O-C bonding and increased the hydrogen bond between polymeric material and paper fibers, which simultaneously inhibited fungi and improved mechanical strength of the original paper, even after the artificial aging. PHMG-KH560 had certain antifungal activity against five fungi, such as Aspergillus versicolor, and Aspergillus Niger , and had better inhibitory effect on Cladosporium herbarum, Trichoderma viride , and Penicillium expansum . The ancient writing ink on the paper sprayed with PHMG-KH560 did not affect its visual beauty, which also indicated that the complex reagent was expected to be applied to the antifungal and reinforcement of paper materials.
研究领域:
文物保护
·
材料科学
·
微生物学
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2023
·Vol. 30
·期 12
·7939-7953
·
IF 5.7
Ren Hui,Mo Wenxuan,Li Bo
As a kind of chemical additives, surfactants are widely used in the processes of papermaking, which played roles of wetting, dispersing, emulsifying etc. to adjust and maintain the product performance. However, there are few reports about the effect of surfactants on fiber properties, especially during paper recycling. This work investigated the effects of three types of surfactants on the cellulosic fibers and paper properties during five-time recycling. Properties of recycled paper with five times were presented as the index of papermaking potential. The results showed that cetyl trimethyl ammonium bromide (CTAB), a cationic surfactant, had an obvious negative effect on paper properties. For continuous surfactant supplements, the burst, tearing, and tensile index decreased by 50.2%, 41.6%, and 43.6%, respectively. Sodium dodecyl benzene sulfonate (SDBS), an anionic surfactant, had a significant positive effect on fibers’ WRV and inhibited the fibers’ hornification to some extent. However, it had a negative effect on paper properties by affecting the bonding between the fibers. Triton X-100 (TX-100), a nonionic surfactant, improved paper properties according to the papermaking potential. For adding surfactant only once, the burst, tearing, and tensile index increased by 15.0%, 8.59%, and 7.2%, respectively. For these three types of surfactants, TX-100 was generally more beneficial for fiber and paper. This paper revealed the effects of surfactants on the fiber and paper properties and perfected the theory of surfactants applied for fiber and paper in papermaking.
研究领域:
制浆造纸工程
·
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Yali Gao,Weisheng Yang,Wenbo Yi,Shuzhen Ni,Yingjuan Fu,Menghua Qin,Fengshan Zhang
In recent years, researchers have put much attention on the improvements and upgrades of novel wet strength agent in the papermaking fields, especially in the usage of household paper. Herein, PEI M -KH560 by polyethyleneimine (PEI) and γ-glycidyl ether propyl trimethoxysilane (KH560) was synthesized with five molecular weights (Mw) of PEI at 600, 1800, 10,000, 70,000 and 750,000. Results showed that the molecular weight greatly influenced the physicochemical properties of PEI-KH560, such as the size and thermal stability. The intrinsic cationic charge of PEI-KH560 provided the bonding sites with the paper fibers, forming strengthened fiber-fiber joints. It was shown that the dry, wet strength and hydrophobicity of cellulosic paper sheets were obviously improved. When the m (PEI):m(KH560) is 1:2, the strength of papers after sizing by Mw of PEI at 600 and 1800 is the most obvious, with the dry strength increased by 227.9 % and 187.5 %, and the wet strength increased by 183.8 % and 207.8 %, respectively. The maximum hydrophobicity was found at the PEI 1800 -KH560 with the contact angle value of 130.6°. The resultant environmental-friendly agent (PEI-KH560) obtained in this work provides valuable significance for the preparation of household and food packaging paper.
研究领域:
制浆造纸工程
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
NORDIC PULP & PAPER RESEARCH JOURNAL
·
2023
·Vol. 38
·期 3
·413-423
·
IF 1.2
Jie Li,Haitang Liu,Qian Wang,Yefan Wang,Lin Chen,Xin Jin,Zhihua Guo,Ting Wang,Xinyu Zhang
The hemicellulose was extracted from the Stachys floridana Shuttlew. ex Benth by ultrasonic-assisted, fractional alcohol precipitation method, mixed with chitosan solution, and coated on the surface of the paper with three layers, to explore the effect of its morphology, thermal stability, barrier, mechanical properties of coated paper. The results showed that the gas barrier property of the paper coated with hemicellulose – chitosan mixed solution decreased from 180 mL/min to 0.265 mL/min, the water barrier property increased from 0 to 84.8°, and the oil barrier property increased from 0 to Kit nº11. The tearing degree of paper increased by 9.2 %, the folding resistance increased by 1296.6 %, dry and wet tensile strength and dry and wet rupture resistance were also significantly improved. The thermal stability mixed solution coated paper is slightly lower than the base paper, but higher than the pure chitosan coated paper. The prepared S. floridana Shuttlew. ex Benth hemicellulose – chitosan blend coating has good barrier property and mechanical properties, and has a wide application prospect.
研究领域:
材料科学
·
生物化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）