文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第1至12个,产品总数201个

设置提升方向
苯并噻唑
ChemistrySelect · 2024 ·Vol. 9 ·期 39 ·e202402554 · IF 1.9

The Performance of Amino- and Hydroxy-Substituted Benzothiazoles in Inhibiting the Corrosion of Carbon Steel in HCl and the Molecular-Level Mechanisms

Yu-chen Zhang,Xuan Liang,Rui Ding,An-lan Ji,Yu-han Wang,Ming-di Lei,Jie Fu,Jie Liu

Graphical The corrosion inhibition of NH 2 and OH substituted benzothiazoles on carbon steel in 0.5 mol/L HCl was investigated. 0.0010 mol/L 2-amino-6-hydroxybenzothiazole demonstrated efficient and persistent performance. The adsorption followed Freundlich-Langmuir isotherm. The OH at 6th position extended negative potential region and enhanced coordination activity, resulting in favorable orbital distribution for flat adsorption and feedback bonds. In the pickling process and acidizing program for oil wells, the acidic corrosion of metals is a problem that needs to be addressed. Various acid corrosion inhibitors have been studied and used to mitigate the acidic corrosion of carbon steel. In this paper, the corrosion inhibition of 2-aminobenzothiazole (2 N-BT), 2-amino-4-hydroxybenzothiazole (2 N4O-BT), and 2-amino-6-hydroxybenzothiazole (2 N6O-BT) on carbon steel in 0.5 mol/L HCl was investigated using electrochemical and quantum chemical methods. All three molecules exhibited corrosion inhibition effects. Compared to 2 N-BT, 2 N4O-BT and 2 N6O-BT showed less sensitivity to the environmental conditions and the surface state of the metal. Among them, 0.0010 mol/L 2 N6O-BT demonstrated the highest and most persistent corrosion inhibition, exhibiting a mixed inhibition mechanism with cathodic inhibition dominance. The adsorption of 2 N6O-BT on the carbon steel surface was found to be non-uniform, preferentially adsorbing at certain active sites on the surface, following Freundlich-Langmuir thermodynamic characteristics. It showed initial strongly adsorbed points and weakly adsorbed regions. With continued adsorption of 2 N6O-BT, the differences between strongly adsorbed points and weakly adsorbed regions decreased. The introduction of hydroxyl groups, especially in 2 N6O-BT, extended the negative potential region and enhanced the coordination activity of the molecule, generating the orbital distribution that was advantageous to flat adsorption and the formation of feedback bonds. This provided a molecular structural basis for the excellent corrosion inhibition properties of 2 N6O-BT.

研究领域: 材料科学 · 电化学 · 量子化学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY · 2019 · IF 2.931

A benzothiazole-rhodol based luminophor: ESIPT-induced AIE and an application for detecting Fe2+ ion

Jianping Guan,Qin Tu,Long Chen,Mao-Sen Yuan,Jinyi Wang

Herein, we designed and synthesized a luminophor, Rh-F , which is an intergrant of rhodol and 2-hydroxy benzothiazole by introducing a benzothiazole unit onto the ortho-position of the phenolic hydroxy of rhodol. Rh-F exhibited excellent fluorescence properties such as a large Stokes shift (>180 nm) and the synergistic effect of aggregation-induced emission (AIE) and an excited state intramolecular proton transfer (ESIPT) feature. The AIE/ESIPT mechanism was thoroughly explored using X-ray single-crystal structures and photophysical determinations. Furthermore, Rh-F showed a sensitive fluorescence response to Fe 2+ with low detection limits of 115.2 nM and high selectivity. Studies of its sensing mechanism indicated that the Fe 2+ -induced blue-green fluorescence-quenched at 525 nm originates from an irreversible Fe 2 + chelate with the oxygen atom of the hydroxyl group and the N atom of the benzothiazole moiety. This blocked the ESIPT process of Rh-F which resulted in the quenching of the fluorescence sensor for Rh-F .

研究领域: 化学 · 材料科学 · 分析化学
✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MOLECULAR STRUCTURE · 2024 · IF 4

A novel benzothiazole-based fluorescent probe for continuous detection of Cu2+/S2− and its application in cell imaging

Yue Zhao,Mingya Wang,Junli Shi,Mingfeng Han,Yuqi Wu,Shengling Li,Linxiu Zhao,Duanlin Cao

In this paper, a fluorescent probe methyl( E )-2-(3-(benzo[ d ]thiazol-2-yl)-2‑hydroxy -5-methylbenzylidene) hydrazine-1-carboxylate ( DYH ) based on benzothiazole was designed and synthesized. The characterization involved NMR, HRMS, and crystal structure analysis. In case of the existence of other competing cations, the probe DYH showed high-affinity for Cu 2+ , and the resultant DYH Cu 2+ showed exceptional capacity to recognize S 2− in CH 3 CN/HEPES (7/3, v/v, HEPES 0.1 M, pH = 7.3). The detection limits of DYH for Cu 2+ and DYH Cu 2+ for S 2− were 0.56 μM and 0.67 μM, respectively. It was determined that the binding stoichiometry between the DYH and Cu 2+ , as well as DYH Cu 2+ and S 2− , was 1:1 according to the job's curve. The pH of the probe and complex was stable between 4 and 10. Colorimetric experiments of the probe DYH were conducted using test paper as a carrier. Additionally, DYH was used for fluorescence imaging of Cu 2+ and S 2− in Hela cells with poor cellular toxicity and good cell permeability.

研究领域: 分析化学 · 生物医学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2024 · IF 5.7

Novel benzothiazole-based fluorescent probe for efficient detection of Cu2+/S2− and Zn2+ and its applicability in cell imaging

Linxiu Zhao,Junli Shi,Yongzheng Liu,Mingfeng Han,Shengling Li,Duanlin Cao

Background In recent years, environmental pollution has been increasing due to the excessive emission of toxic ions, which has caused serious harm to human health and ecological environment. There are various methods for detecting Cu 2+ , S 2− and Zn 2+ , but the traditional ion detection methods have obvious disadvantages, such as poor selectivity and long detection time. Therefore, it is still crucial to develop simple, efficient and rapid detection methods. Results A fluorescent probe based on benzothiazole, ( E )- N '-(3-(benzo[ d ]thiazol-2-yl)-2-hydroxy-5-methylbenzylidene)-3,4,5-tris(benzyloxy)benzohydrazide ( BT ), was designed and synthesized. It was characterized using ESI-MS, 1 H NMR, and 13 C NMR. BT can be used as a chemosensor to detect Cu 2+ , S 2− and Zn 2+ in CH 3 CN/H 2 O (7:3, v/v, pH = 7.4, HEPES buffer: 0.1 M), with detection limits of 0.301 μM, 0.017 μM, and 0.535 μM, respectively. At an excitation wavelength of 320 nm, BT exhibits an “on-off-on” response to Cu 2+ /S 2− and enhanced fluorescence response to Zn 2+ , with a change in fluorescence color from orange to green. The coordination ratio of ions to the probe was determined to be 1:1 through Job's plot and hydrogen spectral titration. The recognition mechanism was discussed in conjunction with theoretical calculations. Furthermore, the probe has been successfully used in test strips and medical swabs colorimetry, as well as live cell imaging. Significance The probe BT lays the foundation for the design and synthesis of multifunctional fluorescent probes. As a portable detection method, probe BT was used to detect Cu 2+ , S 2− and Zn 2+ on strips. Furthermore, the probe was applied to biological cells to detect target ions with low cytotoxicity and excellent cell permeability. This indicating that it can be used as a potential candidate for tracking Cu 2+ and S 2− in clinical diagnostics and biological systems.

研究领域: 分析化学 · 生物医学 · 环境科学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2020 · IF 9.038

Piezo-activation of peroxymonosulfate for benzothiazole removal in water

Shenyu Lan,Yanxi Chen,Lixi Zeng,Haodong Ji,Wen Liu,Mingshan Zhu

Piezoelectricity, as a kind of physical phenomenon, is a coupling between a material’s mechanical and electrical behavior. Herein, the local accumulated charges on the surface of piezoelectric material were used to break O O bond of peroxymonosulfate (PMS) to induce its activation for the benzothiazole (BTH) removal. Taking BaTiO 3 as a model piezocatalyst, up to 97 % of BTH was degraded within 30 min in BaTiO 3 /PMS/force system, which was respective 40 %, 79 %, 83 % higher than that in BaTiO 3 /force piezocatalysis, force/PMS oxidation, and BaTiO 3 /PMS adsorption. A significant synergistic effect was observed since the reaction rate constant of BaTiO 3 /PMS/force was 3 times higher than the sum of those later three processes. The possible activated mechanism was proposed based on reactive species analysis, DFT calculation and LCMS determination. The stability of the piezocatalyst and the treatment performance for real wastewater were studied to investigate the potential in practical applicability. All the results demonstrated that the BaTiO 3 piezoelectricity can efficiently activate PMS to enhance BTH removal, which is a promising strategy for PMS activation, as well as a valuable insight for the piezoelectrical application in wastewater remediation.

研究领域: 环境科学 · 化学工程
✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Royal Society Open Science · 2018 ·Vol. 5 ·期 6 · IF 2.504

Benzothiazole heterogeneous photodegradation in nano α-Fe2O3/oxalate system under UV light irradiation

Xiangyun Han,Xi Zhang,Lei Zhang,Mei Pan,Jinlong Yan

The photodegradation of benzothiazole (BTH) in wastewater with the coexistence of iron oxides and oxalic acid under UV light irradiation was investigated. Results revealed that an effective heterogeneous photo-Fenton-like system could be set up for BTH abatement in wastewater under UV irradiation without additional H2O2, and 88.1% BTH was removed with the addition of 2.0 mmol l−1 oxalic acid and 0.2 g l−1 α-Fe2O3 using a 500 W high-pressure mercury lamp (365 nm). The degradation of BTH in the photo-Fenton-like system followed the first-order kinetic model. The photoproduction of hydroxyl radicals (·OH) in different systems was determined by high-performance liquid chromatography. Identification of transformation products by using liquid chromatography coupled with high resolution tandem mass spectrometry provided information about six transformation products formed during the photodegradation of BTH. Further insight was obtained by monitoring concentrations of the sulfate ion (SO42−) and nitrate ion (NO3−), which demonstrated that the intermediate products of BTH could be decomposed ultimately. Based on the results, the potential photodegradation pathway of BTH was also proposed.

CAS / MDL: 144-62-7
研究领域: 环境科学 · 化学工程
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
TETRAHEDRON · 2015 · IF 2.641

Novel synthesis of benzothiazole by self-redox tandem reaction of disulfide with aldehyde

Bo Liu,Ning Zhu,Hailong Hong,Limin Han

A novel methodology for the preparation of benzothiazole derivatives via the reaction of ortho -anilino disulfides with aryl and heteroaryl aldehydes catalyzed by Na 2 S·9H 2 O has been developed. The reaction mechanism was investigated by LC–MS and 1 H NMR. The disulfide was cleaved firstly by the interchange reaction of the disulfide and metal sulfide , and the resulting thiol reacted in situ with the aldehyde to form the corresponding benzothiazoline. Subsequently, the intermediate benzothiazoline reduced the disulfide to thiol and it was oxidized to benzothiazole. The excess benzothiazoline was oxidized by air and both halves of the disulfide were ultimately converted to the desired benzothiazole.

研究领域: 有机化学 · 药物化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2019 · IF 8.355

Enhanced removal of benzothiazole in persulfate promoted wet air oxidation via degradation and synchronous polymerization

Linbi Zhou,Yongbing Xie,Hongbin Cao,Zhuang Guo,Jiawei Wen,Yanchun Shi

Wet air oxidation (WAO) has an obvious advantage in treating wastewater with high concentration of organics, but harsh reaction conditions are required and the treatment efficiency has not reached a satisfactory level. Herein, we developed a low dosage of persulfate promoted WAO process (PWAO) to remove a model heterocyclic pollutant benzothiazole (BTH). The addition of persulfate remarkably enhanced the elimination of benzothiazole (BTH) and COD from water via degradation and polymerization. Under optimized operation condition (with 11.1 mM K 2 S 2 O 8 addition into WAO), about 65.0% of BTH converted into microsphere polymers and more than 94.6% COD was eliminated from water after polymers separation. Electron paramagnetic resonance (EPR) analysis and quenching experiments revealed that OH was effectively generated in a wide range of reaction temperature and it played the key role in BTH degradation and polymerization, while SO 4 − was detected at low temperature for its fast decomposition at high temperature. Quantum chemical calculation together with ultra-performance liquid chromatography with electrospray ionization tandem mass spectrometry (UPLC-ESI-MS) analysis confirmed that the degradation and polymerization of BTH mainly started from the heterocyclic ring, followed by further oxidation or polymerization. Comparing with normal WAO process, the PWAO technology had an advantage in lower operating cost in removing per unit COD and carbon resource recycle, which indicates a promising prospect in treating wastewater with high concentration of heterocyclic compounds.

CAS / MDL: 7727-21-1 70693-62-8
研究领域: 环境科学 · 化学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Applied Sciences-Basel · 2020 ·Vol. 10 ·期 3 ·894 · IF 2.474

Study on Degradation of Benzothiazolium-Based Ionic Liquids by UV-H2O2

Jianhui Gu,Huimin Zang,Shun Yao,Xuejiao Wang,Minghui Zhu,Hang Song

Ionic liquids (ILs) are considered to be a new type of solvent due to their low vapor pressure, some unique properties and are expected to be used widely in the following days. Given their water solubility, stable chemical structure, and biological toxicity, ILs probably reach aquatic environments and become long-term pollutants. We studied the fate of benzothiazolium-based ionic liquids catalyzed by UV-H2O2in water. Due to the synergistic effect of UV and H2O2, the degradation efficiency can be significantly improved compared to any of them alone. Fitting results showed that the degradation reaction follows pseudo-first-order kinetics and reaction rate constants with hydroxyl radicals ranging from 0.0005 s−1to 0.0529 s−1. The experimental data showed that satisfactory results can be obtained at a temperature of 45 ℃, an initial concentration of ionic liquid of 0.1 M, and a hydrogen peroxide concentration of 0.1 M. We also explored the effects of chloride ions and pH on degradation reactions. In an appropriate situation, the degradation yield of [C4Bth]PF6could achieve 97% in 60 min and 99% in 90 min. The UV-H2O2combination process could provide an effective technique for the treatment of benzothiazolium-based ionic liquids in wastewater.Keywords:photocatalysis;degradation;benzothiazole ionic liquid;H2O2

研究领域: 环境科学 · 化学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYST · 2021 ·Vol. 146 ·期 13 ·4348-4356 · IF 4.616

Ratiometric sensing of Zn2+ with a new benzothiazole-based fluorescent sensor and living cell imaging

Qi Wu,LiHeng Feng,Jian Bin Chao,Yu Wang,Shaomin Shuang

A new fluorescent probe, 3-(benzo[d]thiazol-2-yl)-5-bromosalicylaldehyde-4N-phenyl thiosemicarbazone (BTT), for ratiometric sensing of Zn2+ ions in methanol/HEPES buffer solution (3 : 2, pH = 7.4) is reported in this paper. The presence of Zn2+ ions yields a significant blue shift in the maximum emission of BTT from 570 nm to 488 nm, accompanied by a clear color change from orange to green. This emission change of BTT upon binding to Zn2+ in a 1 : 1 ratio may be due to the block of excited state intramolecular proton transfer (ESIPT) as well as chelation enhanced fluorescence (CHEF) on complex formation. The limit of detection (LOD) determined for Zn2+ quantitation was down to 37.7 nM. In addition, the probe BTT displays the ability to image both exogenous Zn2+ ions loaded into HeLa cells and endogenous Zn2+ distribution in living SH-SY5Y neuroblastoma cells.

CAS / MDL: 5351-69-9
研究领域: 分析化学 · 生物医学 · 材料科学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF CHEMICAL RESEARCH · 2022 · IF 1.097

A visible-light-responsive DiSCn(3)-type fluorescent probe for the rapid, sensitive, and specific detection of tin(II) ions in aqueous solution

Ruiji Li,Dong Wang,Xiaoyun Li,Zehui Zhang,Wei Li

Visible-light-excited fluorescent probes with excellent water solubility are of significant research importance in the biomedical field. In this work, a series of visible-light-responsive carbocyanine fluorescent compounds [DiSCn(3)] are synthesized from 2-methylbenzothiazole and are employed as fluorescent probes for detecting tin(II) ions. Upon addition of tin(II) ions to an aqueous solution of compounds DiSCn(3)-3 and 4, both exhibit considerable changes in their absorption and fluorescent intensity, respectively. These spectral changes may correspond to the binding between tin(II) ions and the sulfur atom in the benzothiazole unit to form a metal complex. This indicates that DiSCn(3)-3 and 4 can be used as promising fluorescent chemical sensors for detecting tin(II) ions in aqueous solution via visible-light excitation.

研究领域: 分析化学 · 生物医学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY · 2023 · IF 6.1

Identifying a New Target for BtOBP8: Discovery of a Small Amino Ketone Molecule Containing Benzothiazole Fragments

Danxia Wu,Li Wang,Wei Li,Xiangyang Li

Insects rely on odorant-binding proteins (OBPs) for chemical perception, making OBPs a promising target for studying attractants and repellents of pests, such as Bemisia tabaci. However, no reports have reported using B. tabaci OBPs (BtOBPs) as pesticide screening targets. To fill this gap, we obtained BtOBP8 through prokaryotic expression and purification. Then, we confirmed its identity using western blotting and mass spectrometry. Next, we used the sitting drop and hanging drop methods to screen its crystal conditions. Using microscale thermophoresis and isothermal titration calorimetry, we identified the highest affinity ligand, 3l, from 30 compounds. Furthermore, point mutation techniques identified Val119 as a key amino acid residue in binding 31 to BtOBP8. Finally, we tested the bioactivity of B. tabaci Mediterranean and found that 3l more effectively inhibits the bioactivity of B. tabaci MED than imidacloprid. This study presents a new approach for developing green insecticides specific to B. tabaci MED by targeting OBPs. Conclusively, identifying and targeting specific OBPs can create more targeted and effective pest control strategies without relying on toxic chemicals.

研究领域: 昆虫学 · 害虫防治 · 蛋白质工程
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。