MATERIALS RESEARCH BULLETIN
·
2023
·
IF 5.4
Huimin Li,Shan Wang,Ran Pang,Lihong Jiang,Da Li,Su Zhang,Chengyu Li,Hongjie Zhang
Contactless thermometer based on fluorescence intensity ratio shows unparalleled characteristics compared with traditional contact thermometers. However, few materials are suitable for high temperature (above 573 K) measurement. In this work, Pr 3+ was selected as the emitter and Y 3 GaO 6 :xPr 3+ luminescent thermometers were designed. The phase, crystal structure and morphology were identified using X-ray diffraction, Rietveld refinement and scanning electron microscope. The spectra with multiple ranges were temperature sensitive due to the cross-relaxion mechanism that occurs in the luminescence process. The parameters for temperature measurement were determined based on the peak intensity ratio of 506 and 610 nm at different temperatures (from 293 to 823 K). Y 3 GaO 6 :0.01Pr 3+ displays excellent temperature sensitive performance, in which the relative sensitivity values increase along with the temperature in a wide temperature range and reach 4.09 % K −1 . The thermometric visualization in Y 3 GaO 6 :xPr 3+ can be achieved due to the widely varying luminescence colors at different temperatures.
研究领域:
材料科学
·
光学工程
·
无机化学
·
传感器技术
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2021
·
IF 3.599
Yanting Zhu,Chenxia Li,Degang Deng,Hua Yu,Hao Li,Le Wang,Changyu Shen,Xufeng Jing,Shiqing Xu
A series of Eu 2+ /Cr 3+ co-doped BaAl 12 O 19 phosphor was synthesized by traditional high temperature solid stated method, and the temperature-sensitive characteristic of the phosphor was researched. Due to the temperature sensitivity of the fluorescence lifetime of Cr 3+ , the thermometry based on fluorescence lifetime can be realized. Furthermore, the emissions of Eu 2+ ion and Cr 3+ ion can be well separated, which shows the excellent signal recognition ability of this phosphor. The Eu 2+ /Cr 3+ co-doped BaAl 12 O 19 phosphor can be used for the thermometry based on fluorescence intensity ratio. A dual-mode optical thermometry is proposed and researched in the temperature range of 293–563 K by using the decay lifetime of Cr 3+ emission and in the temperature range of 295–476 K by using the fluorescence intensity ratio of Eu 2+ to Cr 3+ as temperature readout. The maximum values of relative sensitivity are 0.466% K −1 at 363 K and 0.259% K −1 at 476 K. The Eu 2+ /Cr 3+ co-doped BaAl 12 O 19 phosphor has excellent optical temperature characteristic , and its dual-mode thermometry characteristics provide convenience for the application of this material. This phosphor has potential application prospects in the field of optical thermometry.
研究领域:
材料科学
·
光学工程
·
无机化学
·
传感器技术
·
功能材料
✓ 已验证
DOI
高影响因子
ZEITSCHRIFT FUR ANORGANISCHE UND ALLGEMEINE CHEMIE
·
2019
·
IF 1.337
Zhen Xiao,Jiawei Zhang,Jing Zhu,Hui Xu,Huanping Wang,Shiqing Xu,Yang Xia
Ho 3+ /Yb 3+ co-doped PbTiO 3 nanocrystals with different content of dopant were successfully prepared via a facile hydrothermal method. The purity, morphology, element distribution, chemical state and up-conversion (UC) photoluminescence (PL) of PbTiO 3 nanocrystals affected by Ho 3+ dopant are investigated systematically. X-ray diffraction (XRD) results illustrate that PbTiO 3 samples with the doping Ho 3+ concentration ranging from 0 to 5 mol-% are perovskite structure. The doping Ho 3+ ions have no change on the crystal structure of perovskite PbTiO 3 . Owing to the non-equivalent substitution of Ho 3+ to Ti 4+ in PbTiO 3 , the particle size of Ho 3+ /Yb 3+ co-doped PbTiO 3 samples is decreased as well as the particle agglomeration is detected. Moreover, Ho and Yb ions have uniform distributions in the PbTiO 3 nanoparticles as the presence of Ho 3+ and Yb 3+ cations. The up-conversion spectra demonstrate that Ho/Yb co-doped PbTiO 3 samples have up-conversion emissions centered at 550 nm, 660 nm and 755 nm, corresponding to the transitions of 5 F 4 ( 5 S 2 )→ 5 I 8 , 5 F 5 → 5 I 8 and 5 S 2 ( 5 F 4 )→ 5 I 7 of Ho 3+ ions. Additionally, the effect of temperature on the UC PL property of Ho 3+ /Yb 3+ co-doped PbTiO 3 system is further investigated. The sensitivity and the trend of Ho 3+ /Yb 3+ co-doped PbTiO 3 samples in temperature from 298 k to 493K are calculated on the basis of fluorescence intensity ratio (FIR) method. Ho 3+ /Yb 3+ co-doped PbTiO 3 nanocrystals are verified the high potential in the optical temperature sensing.
研究领域:
材料科学
·
无机化学
·
纳米材料
·
光子学
·
功能材料
✓ 已验证
DOI
高影响因子
Materials Today Communications
·
2022
·
IF 3.662
Yuhong Zhang,Nan Zhang,Pengcheng Wang,Xingke Zheng,Yibin Guo,Hang Liu
In this work, tungstate BaWO 4 phosphors doped Ho 3+ -Yb 3+ -Gd 3+ ions are successfully synthesized through solid-state reaction method. Under the excitation of a 980 nm laser, the up-conversion (UC) luminescence properties are investigated simultaneously. The blue (465 nm, 489 nm), green (541 nm) and red (665 nm) emission intensities of BaWO 4 : Ho 3+ /Yb 3+ /Gd 3+ samples are dramatically enhanced by 20.59, 9.83, 7.37, and 27.59 times more than those without Gd 3+ ions. The possible reason is discussed, which attributes to the energy transfer efficiency enhancement from Yb 3+ to Ho 3+ due to the lattice expansion induced by Gd 3+ ions. The temperature-sensing properties of BaWO 4 : Ho 3+ /Yb 3+ /Gd 3+ samples are also discussed based on the fluorescence intensity ratio (FIR) technology. The sensitivity of temperature measurement for BaWO 4 : Ho 3+ /Yb 3+ /Gd 3+ sample is higher than that of BaWO 4 : Ho 3+ /Yb 3+ . It proves that the codoped Gd 3+ ions can also increase the temperature sensitivity because the higher UC emission efficiency will lead to a high signal-to-noise ratio. The result provides an effective way to design UC luminescence materials with high temperature sensing properties.
研究领域:
材料科学
·
光学材料
·
发光学
·
传感器技术
·
无机功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2022
·
IF 4.171
Yunkang Bu,Yu Chen,Xingyue Chen,Yichun Zhang,Degang Deng,Yuyu Shen,Liuyan Zhou,Chenwei Xu
Up conversion luminescent materials Sr 2 YTaO 6 : Er 3+ , Yb 3+ phosphors were prepared by high temperature calcination . In view of the formation, temperature characteristics , and photoluminescence features of the sample, X-ray diffraction and photoluminescence were used. Under the excitation at 980 nm, the series of samples is significantly stimulated by Er 3+ up-conversion luminescence and Yb 3+ sensitization at 524, 550 and 659 nm. According to the diversity of temperature sensing performance from these three highest peaks, a dual-mode temperature sensor on account of fluorescence intensity ratio (thermally coupled level between 2 H 11/2 and 4 S 3/2 , and nonthermally coupled energy levels between 2 H 11/2 and 4 F 9/2 ) is achieved by using a single luminescent center. Moreover, the phosphor has strong thermal stability, which is helpful to improve the accuracy of temperature measurement. Under the temperature measurement of a dual-mode temperature sensor, it is calculated that the optimal absolute sensitivity S a of thermally coupled energy level is 0.78 × 10 −3 K −1 (473 K) and relative sensitivity S r is 1.32 %K −1 (293 K), and the maximum optimal absolute sensitivity S a of non-thermally coupled energy level is 1.02 × 10 −4 K −1 (473 K) and relative sensitivity S r is 0.58 %K −1 (293 K). All results imply that Sr 2 YTaO 6 : Er 3+ , Yb 3+ phosphors are promising materials for self-referenced optical temperature measurement.
研究领域:
材料科学
·
光学工程
·
无机化学
·
功能材料
·
生物医学传感
✓ 已验证
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2022
·
IF 4.171
Yuzhen Wang,Yanbin Li,Chaoyang Ma,Zicheng Wen,Xuanyi Yuan,Yongge Cao
In this study, NaYTiO 4 : Yb/Tm phosphors with different concentrations of Yb 3+ and Tm 3+ ions were synthesized by conventional solid-state reaction. Upon a 980 nm laser excitation, the up-conversion luminescence properties in a wide temperature range (303–823 K) were investigated. By employing the fluorescence intensity ratio (FIR) techniques based on the robust near-infrared emissions of thermally coupled 3 F 2,3 / 3 H 4 energy levels and 3 H 4(1) / 3 H 4(2) Stark energy levels, the calculated absolute sensitivity (S a ), relative sensitivity (S r ), and temperature uncertainty (δT) values demonstrated good temperature sensing properties. For the 3 F 2,3 / 3 H 4 energy levels, the maximum S r and minimum δT values are 1.04% K −1 and 0.010 K at 463 K, respectively. Moreover, the maximum S a is 0.32 × 10 −3 K −1 at 823 K. In addition, the thermally coupled 3 H 4 Stark energy levels present the maximum S a , S r and the minimum δT are 0.88 × 10 −3 K −1 , 0.60% K −1 and 3.17 K at 303 K, respectively. Besides, due to the ratio of blue to red emission varying with elevated temperature, the NaYTiO 4 : Yb/Tm phosphors are expected to be applied as an intuitive high-temperature indicator.
研究领域:
材料科学
·
光学材料
·
传感器技术
·
固体化学
·
功能材料
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·Vol. 49
·期 5
·8204-8211
·
IF 5.532
Qianchao Ma,Qiyun Liu,Meihua Wu,Yifei Liu,Rui Wang,Ruxian Zhou,Yanheng Xu,Haichao Wei,Ruiyu Mi,Xin Min,Lefu Mei,Zhaohui Huang,Bin Ma
In this study, La 2 (MoO 4 ) 3 doped with Eu 3+ was synthesized by the high-temperature solid-state method. The phase composition of the Eu 3+ -doped La 2 (MoO 4 ) 3 sample was confirmed by X-ray powder diffraction (XRD) analysis, and the microstructure was observed via the scanning electron microscopy (SEM). Under the excitation at 211 nm, the room temperature emission spectra of Eu 3+ in the samples with different doping levels were recorded. In addition, the prepared La 2 (MoO 4 ) 3 : x Eu 3+ ( x = 0–0.25) phosphors were color tunable. A non-contact optical thermometer with high sensitivity and high-temperature resolution was fabricated based on the different thermal quenching behaviors of the Mo–O group and Eu 3+ center. The fluorescence intensity ratio (FIR), temperature resolution (ΔT), maximum absolute and relative sensor sensitivity (Sa and Sr) of La 2 (MoO 4 ) 3 :Eu 3+ were calculated according to different thermal quenching effects between room temperature (298K) and 573K of Eu 3+ and Mo–O group. These results show that La 2 (MoO 4 ) 3 :Eu 3+ has excellent sensitivity and temperature resolution, good reversibility and reliability, as Sa = 0.0525 K -1 , Sr = 0.3724. % K −1 , ΔT = 0.0806 K and the FIR error was only 0.62%. Therefore, the Eu 3+ -doped La 2 (MoO 4 ) 3 is a promising candidate material for high performance non-contact optical thermometers.
研究领域:
材料科学
·
发光材料
·
光学传感
·
无机化学
·
功能材料
·
固体化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Haisheng Chen,Wenwen Chen,Jiaying Shen,Xiaona Du,Tianhong Zhou,Zhengang Dong,Taiyu Bian,Jiaxing Guo,Yiyang Wen,Yuanlin Liang,Zhenping Wu,Yang Zhang
Developing smart luminescent materials with desirable and tunable characteristics has always been an overriding priority of fluorescence technology. However, huge challenges encompass the single functionality of the luminescent materials and the traditional chemical synthetic techniques with rigorously controlling over the miscellaneous experimental conditions and variables. Herein, the lanthanide-doped bismuth-layered ferroelectric (Na 0.5 Bi 0.5 ) 0.96 Er 0.04 Bi 2 Nb 2 O 9.02 has been prepared to be utilized as a platform that not only serves the in-situ and reversible tailoring of the upconverted emission via physical methods, but also enable the versatile functionalities such as photomemory and multi-modal temperature sensing. High luminescent contrast that can reach up to 83.7 % before and after the 405 nm irradiation has been realized on the basis of the photochromic phenomenon of the as-prepared (Na 0.5 Bi 0.5 ) 0.96 Er 0.04 Bi 2 Nb 2 O 9.02 sample, and the fundamental application in the photomemory has been exhibited. Moreover, the performances of triple-mode thermometry built on the fluorescent intensity ratio techniques ( 2 H 11/2 / 4 S 3/2 and 4 S 3/2 / 4 F 9/2 ) as well as the lifetime of the 4 S 3/2 excited state of the Er 3+ ion have been investigated in carefulness, with the maximal relative sensitivities of 1.22 % K −1 at 300 K, 0.92 % K −1 at 510 K, and 0.18 % K −1 at 450 K, respectively. Our results provide significant insights into the methodology of physically modulating the upconversion luminescence, and offer a glamorous pathway for multifunctional high-end applications.
研究领域:
材料科学
·
光学工程
·
功能材料
·
纳米光子学
·
传感技术
·
固态物理
·
智能材料
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）