Study on extraction desulfurization of road-paving asphalt by deep eutectic solvents
During the hot mixing process of road-paving asphalt, odorous substances are released, primarily consisting of sulfur-containing compounds that are regarded as atmospheric pollutants, negatively impacting both human quality of life and the eco-environment. In the paper, a kind of simulated asphalt solution was designed with two sulfur-containing compounds, dibenzothiophene (DBT) and benzothiophene (BT), as well as n-eicosane dissolved in cyclohexane. DBT and BT were extracted with deep eutectic solvent (DES) of tetrabutylammonium bromide and polyethylene glycol (TBAB/PEG). The effects of different molecular weight of PEG as donor on desulfurization efficiency were investigated. The effects of DES donor/receptor ratio, extraction temperature and time, solvent oil ratio, mixing speed, recycling performance of DES on desulfurization efficiency were also studied and optimized. The results indicated that the maximum desulfurization efficiency of BT reached 89.40 % at room temperature with a ratio of agent to oil of 2:1, reaction time of 30 min, and mixing speed of 600 rpm. Similarly, the desulfurization efficiency of DBT achieved 95.54 % when the ratio of agent to oil was 3.5:1, with reaction time of 30 min and mixing speed of 600 rpm. After being recycled eight times, the extraction efficiencies of DBT and BT remained at 85.3 % and 65.2 %, respectively. Under optimized conditions, the extraction efficiency of petroleum asphalt exceeded 23 %. Fourier Transform Infrared (FTIR) analysis indicated that the sulfur-containing compounds found in the saturates and aromatics of road-paving asphalt were extracted by DESs, which are generally more volatile than those found in asphaltenes during hot-mixing. Additionally, minimal changes were observed in the structural composition of the four fractions of desulfurized asphalt.
危险品化学品经营许可证（带存储）