文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

7 项

设置提升方向
钒基正极
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Cathode-electrolyte interface modification by electrolyte engineering for vanadium-based zinc-ion batteries

Zhiqiang Dai,Chengwu Yang,Jin Cao,Xueqing Zhang,Yinghao Zhao,Dongdong Zhang,Xinyu Zhang,Jiaqian Qin

The vanadium (V)-based cathode of aqueous zinc-ion batteries (ZIBs) faces the problem of rapid capacity decay due to material dissolution and structural collapse during the continuous cycling process. Here, we present a strategy to convert the irreversible cathode-electrolyte interphase (CEI) layer of the NH 4 V 4 O 10 (NVO) cathode into a protective layer by incorporating alkali metal sulfate as an additive. After the introduction of Na + , the dynamic consumption and replenishment of OH – during the conversion of Zn 3 (OH) 2 V 2 O 7 ·2H 2 O and Na 2 ZnV 2 O 7 regulates the pH value on the surface of the NVO cathode and inhibits the occurrence of side reactions. The NVO cathode exhibits a higher specific capacity (from 371.8 to 407.8mAh g −1 at 0.1 A g −1 ), better capacity retention (from 30.5 % to 65.9 % after 150 cycles), and superior rate capability after Na + introduction. Additionally, the Na + additives could be also applied for other V-based materials (e.g., V 2 O 5 and VO 2 ) to significantly improve the capacity retention rate. This strategy of incorporating alkali metal sulfate electrolyte additives to fortify cathode cycling stability serves to expedite the transition of aqueous ZIBs from the realm of academia to the industrial sector.

研究领域: 材料科学 · 电化学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Energy Storage Materials · 2022 · IF 20.831

Ultralow-water-activity electrolyte endows vanadium-based zinc-ion batteries with durable lifespan exceeding 30 000 cycles

Wenkang Wang,Cheng Yang,Xiaowei Chi,Jiahe Liu,Bo Wen,Yu Liu

Vanadium-based cathodes with high specific capacity have attracted wide attention in aqueous zinc ion batteries . The main barriers of the development of vanadium-based cathodes are vanadium dissolution, structure degradation, instability of cathode electrolyte interlayer (CEI) and parasitic reactions in aqueous electrolyte. In this work, for the first time, we propose a new type of ultralow-water-activity electrolyte that tackles all these problems. Our design is realized by the introduction of pioneering inert electrolyte filler (trimethyl phosphate). It is discovered that highly concentrated ZnCl 2 H 2 O clusters are surrounded by this electrolyte filler, reaching the lowest free solvation water composition (2.5%) reported so far. The ultralow water activity significantly inhibits parasitic reactions and vanadium dissolution, boosting the achievement of the highest columbic efficiency (99.98%). The biggest bottleneck of vanadium-based cathodes dissolution and water shuttle has been broken through by stable CEI. As a proof of concept , the V 6 O 13 cathode demonstrates exceptional stability of 99.43% capacity retention after 3 000 cycles at 1 A g −1 , and sets a new record for cycle life of 30 000 cycles (capacity retention of 90.34% at 10 A g −1 ) in zinc ion batteries , even reaching the level of supercapacitors (∼100 000 cycles).

研究领域: 材料科学 · 电化学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY COMMUNICATIONS · 2025 · IF 5.4

Cobalt-ion-doped vanadium-based cathodes with multiphase coexistence for high-performance aqueous zinc-ion batteries

Xuezhen Zhai,Ruihan Li,Zihao Zhang,Xuzhe Wang,Lamei Zhang,Cui Shang,Huawei Zhang,Chengzhou Zhao,Dewei Liu

This paper proposes a strategy of oxalic acid-regulated cobalt ion doping to construct a multi-phase coexisting vanadium-based cathode material (CoVO) through a one-step hydrothermal method, and systematically studies its influence on the electrochemical performance of aqueous zinc-ion batteries. The study systematically investigates the effects of oxalic acid concentration on the phase composition, valence state distribution of vanadium, and oxygen defect concentration of CoVO, revealing the enhancement mechanism of electrochemical performance by the synergistic effect of multiphase, oxygen deficiency and Co ions. The experimental results show that the optimized CoVO-3 sample achieves a high specific capacity of 317 mAh g −1 at a current density of 0.1 A g −1 and maintains a capacity retention rate of 89.71 % after 2000 cycles at 5 A g −1 . The rational design in multi-phase interface, enhancement of electronic conductivity due to Co 2+ doping and pseudocapacitive energy storage dominating mechanism are responsible for the superior activity of CoVO-3 sample. Besides, the kinetic results prove that multi - phase interface and oxygen defects will enhance rapidly insertion/extraction kinetics of Zn 2+ from the synergistic effect. In this paper, we present an alternative design strategy to create high-performance and long-cycle-stable cathode materials for aqueous zinc ion batteries.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Crystals · 2023 ·Vol. 13 ·期 4 ·565 · IF 2.7

Preparation and Performance of Highly Stable Cathode Material Ag2V4O11 for Aqueous Zinc-Ion Battery

Xiangling Tong,Junyuan Zhong,Xinxin Hu,Fan Zhang

One of the hottest research topics at present is the construction of environmentally friendly and secure aqueous zinc-ion batteries (AZIBs) using an aqueous electrolyte instead of an organic electrolyte. As a result of their diverse structure, valence state, high theoretical specific capacity, and other benefits, vanadium-based materials, which are frequently employed as the cathode of AZIBs, have drawn the attention of many researchers. The low cycle stability of zinc ion batteries (ZIBs) is mostly caused by the disintegration of the vanadium-based cathode materials during continuous charge and discharge. In this work, using 3M Zn(CF3SO3)2as the electrolyte and hydrothermally synthesized Ag2V4O11as the cathode material, the high-rate performance and extended cycle life of ZIBs were evaluated. The effects of different hydrothermal temperatures on the microstructure, capacity, and cycle stability of the Ag2V4O11cathode material were examined. The experimental results show that Ag2V4O11exhibits a typical intercalation-displacement process when used as the cathode material. The multiplicative performance and cycle stability of the cathode material were significantly enhanced at a hydrothermal temperature of 180 °C. Ag2V4O11-180 has a high discharge specific capacity of 251.5 mAh·g−1at a current density of 0.5 A·g−1and a long cycle life (117.6 mAh·g−1after 1000 cycles at a current density of 3 A·g−1). According to the electrochemical kinetic investigation, the cathode material has a high pseudocapacitive charge storage and Zn2+diffusion coefficient. This is attributed to the large layer spacing and the Ag+anchored interlayer structure.

研究领域: 电化学 · 能源材料 · 无机化学 · 储能技术 · 材料科学
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Multiple redox Centers and defect engineering in Fe/Mo dual-doped Na3V2(PO4)3 cathodes for high-performance sodium-ion batteries

Min Xie,Xiaoying Li,Yufan Chen,Xiangyue Liao,Qiaoji Zheng,Heng Zhang,Kwok-Ho Lam,Dunmin Lin

Sodium superionic conductor (NASICON)-type phosphates cathodes have attracted considerable attention due to their high operational voltage and robust three-dimensional (3D) framework; however, the poor intrinsic electronic conductivity and low energy density hinder their broader application. Herein, a novel NASICON-type Na 3 V 1.44 Fe 0.5 Mo 0.06 (PO 4 ) 3 cathode was designed through Fe/Mo dual-doping at the V sites of Na 3 V 2 (PO 4 ) 3 and synthesized via a conventional high-temperature solid-state method. The introduction of Fe 3+ activates the V 4+ /V 5+ redox couple at a high voltage plateau (∼ 4.0 V), while also generates additional Fe 2+ /Fe 3+ and V 4+ /V 5+ redox pairs. Meanwhile, the doing of Mo 6+ creates cation vacancies, effectively modulating the electronic structure of vanadium and promoting ionic transport kinetics. Benefiting from this dual-doping strategy, the Na 3 V 1.44 Fe 0.5 Mo 0.06 (PO 4 ) 3 cathode delivers a high capacity of 123.4 mAh g −1 at 0.2C and an impressive energy density of 406 Wh kg −1 within 2.2–4.2 V. Moreover, it exhibits outstanding cycling stability, presenting a capacity retention of 92 % after 2500 cycles at 30C. This work highlights a viable strategy for advancing high-performance NASICON-type cathodes through complex metal ion doping.

CAS / MDL: 1313-27-5 7803-55-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2025 · IF 5.6

Fast self-transformation of in-situ confined V2O3 nanodots by a scalable carbon nanosheet with outstanding rate capability and stability for advanced aqueous zinc batteries

Xue Wang,Jiaqi Yue,Jingyi Duan,Jianwei Liu,Peng Chang,Youyu Zhu,Yating Zhang,Guohui Yuan

Aqueous zinc-ion batteries (ZIBs) are desirable for safe and large scale energy storage. However, the lack of suitable cathodes that show excellent comprehensive performance is still key reason that hinders the development of ZIBs. Herein, a laminar hydrated vanadium oxide composites (VOH ND@C) with outstanding rate capability and stability are comprehensively designed and regulated by a fast in-situ electrochemical self-transformation process. The precursor materials (V 2 O 3 ND@C) are fabricated firstly by freeze-drying method in bulk and subsequent calcination process, after which small V 2 O 3 nanodots can be evenly distributed in carbon nanosheets. During electrochemical treatment process, the precursors are fast transformed into laminar hydrated vanadium oxide composites with better structure stability. It is because this strategy of integrating pre-inserted H 2 O molecules and constructing carbon encapsulation are proved to be effectively inhibit volume expansion of vanadium oxide and improve electron transfer. Meanwhile, laminar composite structure and highly exposed active surface from vanadium oxide nanodots contribute to the high-rate capability. Consequently, the VOH ND@C cathode delivers high specific capacity of 452.8 mA h g -1 at 0.2 A g -1 , and excellent rate performance of 176.5 mA h g -1 even at 50 A g -1 . Moreover, excellent cycling stability is acquired with capacity retention 86% over 10,000 cycles. This work is expected to provide a new scalable practical route to improve V-based cathode materials for advanced ZIBs.

研究领域: 储能 · 纳米材料 · 电化学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2024 · IF 9.4

Enhanced redox kinetics in hierarchical tubular FeSe2 by incorporating Se quantum dots towards high-performance sodium-ion batteries

Honghong Fan,Zhifang Yang,Zhiwen Cheng,Farzaneh Bahmani,Jingping Zhang,Xing-Long Wu

Metal selenides have emerged as promising Na-storage anode materials owing to their substantial theoretical capacity and high cost-effectiveness. However, the application of metal selenides is hindered by inferior electronic conductivity, huge volume variation, and sluggish kinetics of ionic migration. In response to these challenges, herein, a hierarchical hollow tube consisting of FeSe 2 nanosheets and Se quantum dots anchored within a carbon skeleton (HT-FeSe 2 /Se/C) is strategically engineered and synthesized. The most remarkable feature of HT-FeSe 2 /Se/C is the introduction of Se quantum dots, which could lead to high electron density near the Fermi level and significantly enhance the overall charge transfer capability of the electrode. Moreover, the distinctive hollow tubular structure enveloped by the carbon skeleton endows the HT-FeSe 2 /Se/C anode with robust structural stability and fast surface-controlled Na-storage kinetics. Consequently, the as-synthesized HT-FeSe 2 /Se/C demonstrates a reversible capacity of 253.5 mAh/g at a current density of 5 A/g and a high specific capacity of 343.9 mAh/g at 1 A/g after 100 cycles in sodium-ion batteries (SIBs). Furthermore, a full cell is assembled with HT-FeSe 2 /Se/C as the anode, and a vanadium-based cathode (Na 3 V 2 (PO 4 ) 2 O 2 F), showcasing a high specific capacity of 118.1 mAh/g at 2 A/g. The excellent performance of HT-FeSe 2 /Se/C may hint at future material design strategies and advance the development and application of SIBs.

CAS / MDL: 141-43-5 7782-49-2
研究领域: 材料科学 · 电化学 · 能源存储
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。