COMBUSTION AND FLAME
·
2023
·
IF 4.4
Yuxiang Li,Kaili Zhang
Metastable intermolecular composites (MICs) comprising solid fuels and oxidizers at nano-scale exhibit high energy densities and fast reaction speeds. As most metal and metalloid fuels are passivated by the natural oxide layer on the surface which acts as a reaction barrier, fluorine-containing oxidizers are of particular interest to promote the reactivity through interfacial fluoridation. In this work, cobalt hydroxy fluoride (Co(OH)F) was introduced as a functional fluorine-containing oxidizer, and core-shell structured Co(OH)F@Al nanoarray was fabricated onto a glass substrate . The thermal behavior and reaction mechanism of pure Co(OH)F and Co(OH)F@Al composites were thoroughly investigated, and Co(OH)F@Al was compared with CoO@Al and Co 3 O 4 @Al with identical morphology. In the Co(OH)F@Al composite, a pre-ignition reaction was observed which was attributed to the etching of Al 2 O 3 shell by HF and the fluoridation of Al core by HF and CoF 2 . With the assistance of pre-ignition reaction, Co(OH)F@Al can complete main exothermal reaction before Al melting in a solid-state mechanism, and its peak temperature is around 200 ℃ lower than those of MICs employing CoO and Co 3 O 4 as oxidizers.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2025
·
IF 6.3
Minghan Zhou,Tongtong Gao,Shuanglong Chen,Xuejiao Wang,Qiushi Wang,Cailong Liu
Due to its unique advantages including non-contact operation, high sensitivity, and exceptional spatial resolution, nanoscale optical thermometry has become an indispensable technique with widespread applications in micro/nanoelectronics, integrated photonic systems, and biomedical engineering. Here, Yb 3+ /Tm 3+ co-doped AlN nanowires were successfully synthesized via an arc-discharge method. The nanowires, characterized by X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and transmission electron microscopy, exhibit lengths of several micrometers and uniform diameters ranging from 10 to 20 nm, yielding a high aspect ratio. Under 980 nm excitation, the nanowires display distinct up-conversion (UC) luminescence, with emission bands at 544 nm (green), 654 nm and 691 nm (red), and 795 nm (near-infrared), corresponding to Tm 3+ ion transitions. The AlN:Yb 3+ /Tm 3+ nanowires show excellent optical thermometry performance, achieving a maximum relative sensitivity ( S r ) of 3.32 % K −1 at 298 K and a temperature resolution ( δT ) of 0.009 K. These results underscore the potential of AlN:Yb 3+ /Tm 3+ nanowires for advanced optical temperature sensing in nanotechnology, biomedical applications, and high-resolution thermal imaging.
研究领域:
材料科学
·
纳米技术
·
光学工程
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2022
·Vol. 12
·期 9
·1390
·
IF 5.719
Heng Wang,Guo-Min Li,Bing Li,Jing-Lin You
Aluminum nanowires with irregular morphologies were prepared by template-free electrodeposition from a room-temperature chloroaluminate ionic liquid. The effects of the diffusion condition and deposition potential on the morphologies of Al nanowires were investigated. The decrease of diffusion flux leads to the formation of particular segmented morphologies of Al nanowires. A dynamic equilibrium between the electrochemical reaction and the diffusion of Al2Cl7−results in the current fluctuation and the periodical variation of diameters in the Al nanowires growth period. Al nanowires with several kinds of morphologies can be controllably electrodeposited under a restricted diffusion condition, without using a template. Increasing the overpotential shows the similar influence on the morphology of Al nanowires as the decrease in diffusion flux under the restricted diffusion condition. Most of the segmented Al nanowires have a single crystalline structure and grow in the [100] orientation. This work also provides a new strategy for the fabrication of nanowires with highly controllable irregular morphologies.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2013
·
IF 4.612
Zhuomin Zhang,Yunjian Ma,Qingtang Wang,An Chen,Zhuoyan Pan,Gongke Li
A novel alumina nanowire (ANW) solid-phase microextraction (SPME) fiber coating was prepared by a simple and rapid anodization-chemical etching method for ultra-selective determination of volatile esters and alcohols from complicated food samples. Preparation conditions for ANW SPME fiber coating including corrosion solution concentration and corrosion time were optimized in detail for better surface morphology and higher surface area based on scanning electron microscope (SEM). Under the optimum conditions, homogeneous alumina nanowire structure of ANW SPME fiber coating was achieved with the average thickness of 20 μm around. Compared with most of commercial SPME fiber coatings, ANW SPME fiber coatings achieved the higher extraction capacity and special selectivity for volatile esters and alcohols. Finally, an efficient gas sampling technique based on ANW SPME fiber coating as the core was established and successfully applied for the ultra-selective determination of trace volatile esters and alcohols from complicated banana and fermented glutinous rice samples coupled with gas chromatography/mass spectrometry (GC/MS) detection. It was interesting that 25 esters and 2 alcohols among 30 banana volatile organic compounds (VOCs) identified and 4 esters and 7 alcohols among 13 identified VOCs of fermented glutinous rice were selectively sampled by ANW SPME fiber coatings. Furthermore, new analytical methods for the determination of some typical volatile esters and alcohols from banana and fermented glutinous rice samples at specific storage or brewing phases were developed and validated. Good recoveries for banana and fermented glutinous rice samples were achieved in range of 108–115% with relative standard deviations (RSDs) of 2.6–6.7% and 80.0–91.8% with RSDs of 0.3–1.3% ( n = 3), respectively. This work proposed a novel and efficient gas sampling technique of ANW SPME which was quite suitable for ultra-selectively sampling trace volatile esters and alcohols from complicated food samples.
研究领域:
分析化学
·
食品科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Energy Storage Materials
·
2024
·
IF 18.9
Chuan Ou,Siyang Ye,Zhaojie Li,Xueying Zheng,Fei Tian,Danni Lei,Chengxin Wang
Composite gel polymer electrolytes (CGPEs) have received wide attention due to their great potential to improve the safety and cycling stability of lithium (Li) metal batteries. However, the poor interface compatibility between the filler and polymer in CGPEs severely hinders lithium-ion (Li + ) pathways and limits cell performance. Herein, we propose an Al(EtO) 3 nanowires framework that can trigger poly (ethylene glycol) diglycidyl ether (PEGDE) to undergo ring opening polymerization, thus inducing polymer tight combination on the surface of Al(EtO) 3 nanowires framework and dividing the polymer matrix into mesh units, contributing to ordered Li + transport and dendrite-free deposition on the metallic anode. Such a CGPE with highly conductive and interface compatibility facilitates a high-performance quasi-solid-state Li||Li cell with an excellent long-term cycling stability for over 3000 h without a short circuit and registers a high capacity of 146.9 mAh g −1 after 46 cycles at a mass loading of 6 mg cm −2 . Solid-state nuclear magnetic technology clearly clarifies the transport path of lithium ions in Al(EtO) 3 -based gel polymer electrolyte (AGPE). The results open up a new way to improve the electrochemical performances of composite electrolyte and promote its commercial application process.
研究领域:
材料科学
·
电化学
·
能源存储
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2022
·
IF 10.319
Wenqiang Hu,Wenbin Fu,Samik Jhulki,Liang Chen,Aashray Narla,Zhijian Sun,Fujia Wang,Alexandre Magasinski,Gleb Yushin
Poor heat/flame-resistance of polyolefin (e.g., polyethylene and polypropylene) separators and high flammability of organic electrolytes used in today's lithium-ion batteries (LIBs) may trigger rare yet potentially catastrophic safety issues. Here, we mitigate this challenge by developing a heat-resistant and flame-retardant porous composite membrane composed of polyetherimide (PEI) and Al 2 O 3 nanowires (NWs). The membranes are fabricated based on an industrially scalable non-solvent-induced phase separation process, which results in an intimately interconnected porous network of Al 2 O 3 NWs and PEI . The produced composite membranes exhibit excellent flexibility, thermal stability, and flame-retardancy. Importantly, the composite membranes exhibit minimal thermal shrinkage and superior tensile strength (16 MPa) at temperatures as high as 200 °C, significantly exceeding the performance of conventional polyolefin separators. Compared with commercial separators, their superior wettability and higher ionic conductivity (by up to 2.4 times) when filled with the same electrolyte, larger electrolyte uptake (∼190 wt.%), as well as improved cycle and rate performance demonstrated in LiNiMnCoO 2 (NCM)-based LIBs make them attractive choices for a variety of electrochemical energy storage devices.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子科学
·
纳米技术
✓ 已验证
DOI
高影响因子
Polymers
·
2020
·Vol. 12
·期 9
·2126
·
IF 3.426
Liangsong Huang,Xitao Lv,Yongzhe Tang,Guanghui Ge,Peng Zhang,Yuxia Li
Alumina nanowires (Al2O3-NWs)/epoxy resin composites have been thoroughly studied due to their excellent insulating and dielectric performance. In particular, understanding the effect of nano-alumina with different morphologies on the dielectric performance of composites is of great significance. In this study, Al2O3-NWs with lengths of approximately 100 nm and diameters of approximately 5 nm were prepared and blended with anepoxy resin to form composites, and the effect of the mass fraction of fillers on the thermal conductivity of the composites was investigated. Specifically, the effect of alumina fillers with ananowire structure on the insulating and dielectric performance and breakdown strength of the epoxy composites were analyzed. The influence principle of the interfacial effect and heat accumulation on the dielectric and insulating properties of the composites were described. The results demonstrated that the thermal conductivity of Al2O3-NWs/epoxy resin composites was higher than that of the bare epoxy resin. The thermal conductivity of Al2O3-NWs/epoxy resin composites increased with increasing mass fraction of fillers. When the mass fraction of fillers was 10%, the thermal conductivity of the composite was 134% higher than that of the epoxy resin matrix. The volume resistivity of the composites first increased and then decreased as the mass fraction of fillers increased, while the dielectric constant of the composites increased with increasing mass fraction of fillers and decreasing frequency. The dielectric loss of the composites decreased and then increased as the mass fraction of fillers increased, and it increased with increasing frequency. Additionally, the alternating current breakdown strength of the composites first increased and then decreased withincreasingmass fraction of fillers.Keywords:Al2O3-NWs;composite;thermal conductivity;volume resistivity;dielectric performance;breakdown strength
研究领域:
材料科学
·
电气工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2019
·Vol. 10
·期 1
·1-11
·
IF 11.878
Lei Danni,He Yan-Bing,Huang Huijuan,Yuan Yifei,Zhong Guiming,Zhao Qiang,Hao Xiaoge,Zhang Danfeng,Lai Chen,Zhang Siwei,Ma Jiabin,Wei Yinping,Yu Qipeng,Lv Wei,Yu Yan,Li Baohua,Yang Quan-Hong,Yang Yong,Lu Jun,Kang Feiyu
Sodium metal batteries have potentially high energy densities, but severe sodium-dendrite growth and side reactions prevent their practical applications, especially at high temperatures. Herein, we design an inorganic ionic conductor/gel polymer electrolyte composite, where uniformly cross-linked beta alumina nanowires are compactly coated by a poly(vinylidene fluoride-co-hexafluoropropylene)-based gel polymer electrolyte through their strong molecular interactions. These beta alumina nanowires combined with the gel polymer layer create dense and homogeneous solid-liquid hybrid sodium-ion transportation channels through and along the nanowires, which promote uniform sodium deposition and formation of a stable and flat solid electrolyte interface on the sodium metal anode. Side reactions between the sodium metal and liquid electrolyte, as well as sodium dendrite formation, are successfully suppressed, especially at 60 °C. The sodium vanadium phosphate/sodium full cells with composite electrolyte exhibit 95.3% and 78.8% capacity retention after 1000 cycles at 1 C at 25 °C and 60 °C, respectively.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）