IONICS
·
2020
·Vol. 26
·期 8
·3901-3909
·
IF 2.394
Li Mei,Sun Zhongxuan,Guo Dan,Han Wei,Sun Yang,Yang Xiaoguang,Zhang Milin
The electrode reaction of Pr(III) and coreduction of Pb(II) and Pr(III) were studied on an inert W electrode in eutectic LiCl-KCl to extract Pr from molten salt. The electrode process kinetic of Pr(III) on W electrode was firstly explored employing cyclic voltammetry (CV) and Tafel technique, such as the diffusion coefficient of Pr(III) in eutectic LiCl-KCl and the exchange current density ( j 0 ) for Pr(III)/Pr(0) couple and the electrode reaction activation energy. Then, various electrochemical techniques were used to investigate the coreduction of Pb(II) and Pr(III). Four cathode current peaks ascribed to the formation of Pr x Pb y intermetallic compounds were detected, which indicated that the Pr could deposit on pre-deposited Pb film, react with Pb, and form Pr x Pb y intermetallic compounds. Furthermore, the electrolytic products formed by galvanostatic electrolysis were characterized by scanning electron microscopy coupled with energy dispersive X-ray diffraction, which illustrated the formation of PrPb 3 intermetallic compound in LiCl-KCl-PbCl 2 -PrCl 3 melt.
研究领域:
化学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2020
·Vol. 167
·期 14
·142505
·
IF 3.721
Wei Han,Wenjuan Wang,Mei Li,Yangyang Meng,Wenjing Ji,Yang Sun
To recover Gd from LiCl-KCl eutectic, the coreduction mechanism of Gd(III) with Pb(II) was investigated using electrochemical methods. The formation potentials related to the formation of three Gd-Pb intermetallics were detected by cyclic voltammetry, square wave voltammetry and chronopotentiometry, and the formation mechanism of Gd-Pb compounds could be described as xPb(II) + 2xe− = xPb. Meanwhile, the electroreduction of Gd on liquid Pb electrode was explored. The diffusion coefficient of Gd metal in liquid metallic Pb was determined by anodic chronopotentiometry. The kinetic parameters of Gd(III)/Gd(in Pb) couple in the temperature range from 723 K to 873 K were determined employing linear polarization (LP) method. Based on the relationship of exchange current density and temperature, the reaction activation energy was estimated to be 23.17 kJ mol−1. In addition, the recovery of Gd from molten salts was performed assisted by liquid Pb electrode by constant potential electrolysis (CPE) and constant current electrolysis (CCE). The products characterized using XRD, SEM with EDS are comprised of GdPb3 and Pb phases. The concentration change of Gd during CCE process was monitored by ICP-AES, and the recovery rate was estimated. The results showed that Gd concentration decreased and recovery rate increased with the duration.
研究领域:
材料科学
·
电化学工程
✓ 已验证
DOI
高影响因子
Journal of Magnesium and Alloys
·
2020
·
IF 7.115
Shaolong Li,Yusi Che,Chenyao Li,Yongchun Shu,Jilin He,Bin Yang,Jianxun Song
The electrochemical behavior of Mg 2+ and Al 3+ in LiCl-KCl (mass 4: 1) melt at 973 K was studied on a Mo electrode systematically by cyclic voltammetry, square wave voltammetry and chronopotentiometry. The results showed that the reductions of Mg 2+ and Al 3+ were reversible processes controlled by the rate of the mass transfer. When Mg 2+ and Al 3+ coexisted in LiCl-KCl melt, they had no significant effect on the reduction potential of each other. The equilibrium potentials of Mg 2+ /Mg and Al 3+ /Al were obtained by open circuit potential method. Their apparent standard potentials were also calculated in this system and the values were −2.52 V vs Cl 2 /Cl − , −1.66 V vs Cl 2 /Cl − , respectively. Correspondingly, the apparent Gibbs free energies of Mg 2+ /Mg and Al 3+ /Al were −485.71 kJ/mol, −480.78 kJ/mol. Finally, potentiostatic electrolysis was performed on a Mo electrode in LiCl-KCl-MgCl 2 -AlCl 3 (the mass ratio of MgCl 2 to AlCl 3 was 10:1) melt at different potentials. The components of the deposits were characterized by scanning electron microscope and energy dispersive spectroscopy. The study revealed that the content of Al in the deposit decreased as the overpotential increased and Al tended to segregate at the grain boundaries.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
International Journal of Minerals Metallurgy and Materials
·
2025
·Vol. 32
·期 4
·892-901
·
IF 7.2
Zhang Yongcheng,Yin Taiqi,Zhang Lei,Zhang Xiaochen,Bo Tao,Tan Xiaoli,Li Mei,Han Wei
Herein, the electrochemical behaviors of Sr on inert W electrode and reactive Zn/Al electrodes were systematically investigated in LiCl-KCl-SrCl 2 molten salts at 773 K using various electrochemical methods. The chemical reaction potentials of Li and Sr on reactive Zn/Al electrodes were determined. We observed that Sr could be extracted by decreasing the activity of the deposited metal Sr on the reactive electrode, although the standard reduction potential of Sr(II)/Sr was more negative than that of Li(I)/Li. The electrochemical extraction products of Sr on reactive Zn and Al electrodes were Zn 13 Sr and Al 4 Sr, respectively, with no codeposition of Li observed. Based on the density functional theory calculations, both Zn 13 Sr and Al 4 Sr were identified as stable intermetallic compounds with Zn-/Al-rich phases. In LiCl-KCl molten salt containing 3wt% SrCl 2 , the coulombic efficiency of Sr in the Zn electrode was ∼54%. The depolarization values for Sr on Zn and Al electrodes were 0.864 and 0.485 V, respectively, exhibiting a stronger chemical interaction between Zn and Sr than between Al and Sr. This study suggests that using reactive electrodes can facilitate extraction of Sr accumulated while electrorefining molten salts, thereby enabling the purification and reuse of the salt and decreasing the volume of the nuclear waste.
研究领域:
材料科学
·
核能工程
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
Crystals
·
2023
·Vol. 13
·期 5
·817
·
IF 2.7
Yanhong Jia,Shuangshuang Chang,Xin Du,Shaoqiang Guo
Molten LiCl-KCl salt and liquid cadmium are proposed as the electrolyte and the reactive cathode for the electrorefining of spent nuclear fuels, but they can be corrosive to the structural alloys. The down-selection of existing materials through corrosion testing is necessary to ensure the longevity of the electrorefiner vessel and electrode assemblies. Haynes C276, Inconel 600, AISI 316L stainless steel, and 42CrMo low-alloy steel were exposed to a LiCl-KCl melt at 500 °C for 500 h in an argon atmosphere. All alloys suffered from dissolution attacks with the presence of oxide islands or a porous oxide layer on the surface. AISI 316L, T91 steel, and tungsten specimens were submitted to corrosion tests in liquid cadmium at 500 °C for 120 h. The corrosion of AISI 316L and T91 stainless steel was predominated by chemical oxidation, with the additional occurrence of severe Ni dealloying and Cd penetration on AISI 316L. Destabilization of the Cr oxide layer by cadmium was discovered, resulting in the formation of CdCrO4. Tungsten only suffered from a dissolution attack at a rate of 0.50 mm/a.Keywords:corrosion;molten salts;liquid cadmium;SEM
研究领域:
材料科学
·
核能工程
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL THERMODYNAMICS
·
2020
·
IF 2.888
Minghui Xu,Valeri Smolenski,Qi Liu,Alena Novoselova,Kewei Jiang,Jing Yu,Jingyuan Liu,Rongrong Chen,Hongsen Zhang,Milin Zhang,Jun Wang
The interaction of oxygen and cerium-free ions in molten 3LiCl-2KCl eutectic in the temperature range of (723–823) K was studied by the method of potentiometric titration using YZME electrodes. Stable states of cerium compounds in the Ce–O system and the mechanism of interaction of Ce 3+ with O 2− ions have been established. The solubility constants of cerium oxychloride and oxide compounds at different temperatures were determined. Principal thermodynamic data of CeOCl and Ce 2 O 3 were calculated. The Pourbaix (potential-pO 2− ) diagram was drawn and summarizes the properties of stable cerium species in the melt.
研究领域:
化学
·
材料科学
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Hong Zhang,Qian Du,Xin Du,Zhanglian Xu,Shaoqiang Guo,Wentao Zhou
The electrorefining of spent nuclear fuels in a molten LiCl-KCl salt electrolyte recovers the valuable actinides but also releases radioactive fission products in the salt. To minimize the nuclear waste volume, dissolved fission products such as rare earths (REs) must be removed from the electrorefining salt and immobilized into proper wasteforms. Here we propose a two-step approach for treating the electrorefining waste salt by (i) the electrolytic recovery of REs from the salt using a liquid metal cathode; and subsequent (ii) oxidative extraction of REs from the liquid metal into durable wasteforms. Experimental demonstration using rare earth element samarium (Sm) and liquid metal (Bi) was successful. The Sm ions dissolved in the salt can be selectively recovered as dendrite Sm-Bi intermetallic products on the top of liquid bismuth cathode through electrolysis at appropriate applied currents or potentials. Then the Sm in the Sm-Bi alloy was efficiently extracted into both zinc-in-titania (ZIT) glass ceramic and lanthanide aluminoborosilicate (LABS) glass wasteforms through selective oxidation at Sm 2 O 3 loadings of 18–25 wt% and 50 wt%, respectively. Recycling of the electrorefining salt with minimum nuclear waste generation is foreseeable with the use of this simple, efficient, and highly compatible process.
研究领域:
核化学与技术
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RADIOANALYTICAL AND NUCLEAR CHEMISTRY
·
2022
·Vol. 331
·期 12
·5641-5648
·
IF 1.754
Smolenski Valeri,Novoselova Alena,Yan Yongde,Xue Yun,Ma Fuqiu
The equilibrium potentials of Me(III)/Me (Me = Dy, U) couples and the double Me–Ga, Me–Cd alloys vs. Cl − /Cl 2 reference electrode were measured at the temperature range 673–973 K in molten LiCl–KCl–CsCl eutectic by open-circuit potentiometry. The apparent standard potential and the base thermodynamic properties of alloys were determined. Separation factor for Dy/U couple was calculated on gallium and cadmium electrodes. In addition, it was found that the application of gallium electrodes has a significant advantage over cadmium electrodes in the process of electrochemical separation of uranium and dysprosium.
研究领域:
材料科学
·
核能工程
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2020
·
IF 3.104
Mei Li,Yongcheng Zhang,Haiming Li,Hailing Jiang,Wei Han,Yang Sun
In the present work, cyclic voltammetry (CV), square wave voltammetry (SWV) and chronopotentiometry (CP) were used to investigate the electrochemical coreduction behaviors of La(III) and Mg(II) as well as La(III), Mg(II) and Mn(II) on Mo electrode in LiCl + KCl molten salts. CV and SWV results exhibit that the coreduction mechanism of La (III) and Mg(II) on Mo electrode is that La(III) is reduced and Mg–La intermetallic compound is formed, leading to the deposition potential of La(III) shifting to more positive one. The electrochemical signals pertaining to the formation of metallic La, Mg and Mn as well as Mg–La intermetallic compound are also observed by coreduction of La(III), Mg(II), and Mn(II) in LiCl + KCl molten salt on the inert Mo electrode. However, the electrochemical signals associated with the formation of La–Mn and Mg–Mn alloys are not observed, which means that the depolarization effect of La(III) and Mg(II) does not occur on pre-deposited Mn electrode. The Mg–La–Mn alloys were formed by co-deposition of La(III), Mg(II), and Mn(II) on Mo electrode at various concentration ratios of La(III) and Mg(II). The results of scanning electron microscopy equipped with energy dispersive spectroscopy and X-ray diffraction displays that the Mg–La–Mn alloys are comprised of La–Mg compound Mg 17 La 2 , Mg and Mn phases. The concentration ratio of La(III) and Mn(II) has few effects on the alloy composition .
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2021
·Vol. 168
·期 6
·062511
·
IF 4.316
Da-Wei Yang,Shi-Lin Jiang,Ya-Lan Liu,Tai-Qi Yin,Mei Li,Lin Wang,Wan Luo,Zhi-Fang Chai,Wei-Qun Shi
Studying the electrodeposition mechanism of La3+ in LiCl-KCl salt is extremely important for understanding the main characteristics of the deposition of An/Ln in the pyrochemical reprocessing of spent nuclear fuels. In this work, cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and Tafel methods were employed to investigate the electrodeposition mechanism and kinetic processes of La3+ on Al, Ga and Al-Ga alloy cathodes in LiCl-KCl eutectic salt at the temperature range of 723−873 K. The EIS spectra were measured by applying a minimum overpotential near the equilibrium potential, and the suitable equivalent circuits were fitted. The values of exchange current density (i0) calculated by EIS ranged from 0.078 to 0.42 A cm−2. Finally, Al2Ga2La ternary and Al3La, Ga6La binary alloys were obtained by the potentiostatic electrolysis, which were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS).
研究领域:
材料科学
·
电化学工程
·
核能技术
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Wei Li,Zeng Chen,Chaochao Wei,Wenping Kong,Binghua Xu,Xiyang Jia,Chunli Diao,Shengjun Li
An electrochemical method was developed for the formation of Al-Cu alloys. The electrodeposition of aluminum on Mo and Cu substrates was studied using cyclic voltammetry in molten LiCl-KCl-AlCl 3 (2 wt.%). During the cathodic scan of the cyclic voltammograms, three different Al-Cu alloys were observed before pure Al formed on the Cu substrate. The electrochemical formation processes were studied using square wave voltammetry and open circuit chronopotentiometry. The products of the different reduction processes were identified using XRD. The XRD results indicated that three different Al-Cu intermetallic compounds, Al 4 Cu 9 , AlCu, and Al 2 Cu, were obtained using electrochemical deposition in the molten salt system.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）