INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Liping Mei,Jiao Wei,Ruirui Yang,Wei Guo,Yuexin Liu,Fei Ke,Chuanyi Peng,Ruyan Hou,Guijie Chen,Junsheng Liu,Daxiang Li,Xiaochun Wan,Huimei Cai
To mitigate the risk associated with water-soluble fluoride in tea and to have less influence on the contents of tea infusion, a highly selective lanthanum modified silk fibroin (SF) and polyvinyl alcohol (PVA) composite film (SF/PVA-La) was prepared to remove fluoride from brick tea infusion. Notably, SF/PVA-La could remove about 48 % of the fluoride from in brick tea infusion within 30 min. Importantly, the reduction in total tea polyphenols in brick tea did not exceed 10 %, and the reduction in caffeine was only 0.4 %. In addition, the Langmuir model revealed a maximum fluoride adsorption capacity of 9.15 mg/g for SF/PVA-La in brick tea infusion. Both FTIR and XPS analyses confirmed that SF/PVA-La engages in electrostatic adsorption of fluoride ions, with ion exchange occurring between the hydroxyl groups on its surface and the fluoride ions. These findings underscore the potential of SF/PVA-La as an effective material for selective fluoride removal from brick tea infusions.
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2023
·
IF 4.2
Lin Mei,Chao Feng,Yuzhong Wang,Qiang Yu,Wenjie Xin,Weifeng Chu,Yanan Wang,Xiangxue Zhu,Shenglin Liu,Hongxia Wang,Longya Xu
Synthesis of acetonitrile (ACN) by way of ethanol dehydroamination process was performed over copper-, zinc-, nickel-, and cobalt-based catalysts in a fixed-bed reactor, by which 20Co/Al2O3 was found to be the best one and ready for subsequent La, Ce, and Pr doping. Then, catalytic tests and a series of characterizations such as XRD, XRF, XPS, TEM, TG-DTA, IGA, NH3-TPD, and N2 adsorption–desorption were carried out. The results demonstrate that rare-earth-modified 20Co/Al2O3 catalysts have improved the catalytic performance for ethanol dehydroamination remarkably; the addition of La leads to better dispersion of cobalt species, the higher surface area of 20Co/Al2O3 catalyst, and fast adsorption for ACN, as well as better resistance to carbon deposition. In the meantime, the La-doped catalyst seems to prefer the route of acetaldehyde imine to ACN rather than to ethylamine, and consequently, a highly selective synthesis of ACN with excellent catalytic stability was obtained with the formation of ethylamine being suppressed..
研究领域:
催化化学
·
材料科学
✓ 已验证
DOI
高影响因子
RSC Advances
·
2025
·Vol. 15
·期 1
·48-57
·
IF 4.6
Boxuan Li,Shaoxin Wen,Jiacheng Li,Dedong He,Yongming Luo,Xiangqian Zheng,Dingkai Chen
Polysilicate-ferric-calcium-lanthanum (PSFCL) was synthesized through a co-polymerization method in order to treat the yellow phosphorus wastewater. Its morphology, composition and functional group were analyzed by X-ray Diffraction (XRD), Fourier Transform-Infrared Spectroscopy (FTIR), Scanning Electron Microscopic (SEM) and X-ray Photoelectron Spectroscopy (XPS), respectively. The optimization of the flocculant was also investigated, including La/Si molar ratio, pH, agitation time, dosage and sedimentation time. Results showed that PSFCL has reached an excellent removal efficiency of 95% and 97% towards phosphorus and fluoride, respectively. It could be inferred that charge neutralization, bridging effect and ligand exchange were the main coagulation mechanisms. As a whole, after the introduction of lanthanum, PSFCL was found to be a promising flocculant in yellow phosphorus wastewater treatment owing to its high removal efficiency and simple synthesis route.
研究领域:
环境科学
·
化学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Materials
·
2025
·Vol. 18
·期 7
·1421
·
IF 3.2
Wei Li,Yi Wu,Ruiqing Huang,Chen Yang,Mei Zhang,Pengchen Xie,Jian Xiong,Xuebin Lu
Municipal sludge was pyrolyzed to produce sludge-derived biochar (SBC), which was subsequently modified with lanthanum nitrate. Through orthogonal experiments, the optimal preparation conditions for La-SBC-700 were determined. The morphological and textural properties of the biochar material, such as specific surface area, were characterized and batch adsorption experiments simulating fluoride-containing wastewater were conducted to investigate the effects of pH, fluoride concentration, biochar dosage, and coexisting ions on the fluoride removal performance of La-SBC-700. The application potential of the biochar material in real geothermal water was also assessed. The results indicated that La-SBC-700 prepared under optimal conditions exhibited an adsorption capacity approximately 10 times higher than that of the pristine biochar (SBC). The adsorption process was stable within the pH range of 5.0 to 8.0 and conformed to the Quasi-secondary-order kinetic and Langmuir isotherm models, with a maximum theoretical adsorption capacity of 40.338 mg/g. The adsorption process was spontaneous and endothermic.NO3−and Cl−had negligible effects on fluoride removal, whereasCO32−,SO42−, andHCO3−exerted varying degrees of influence on the adsorption process. La-SBC-700 demonstrated excellent performance in removing fluoride from geothermal water, providing a reference method for the resourceful utilization of sludge and the removal of fluoride from geothermal water.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yunyun Wang,Yonglan Huang,Jun Chu,Jian Ye,Yinhua Jiang,Jiangdong Dai
This study presents the synthesis of a novel lanthanum-modified cellulose-based carbon aerogel (La-CCA) from waste printing paper, aimed at addressing the issue of phosphate pollution in aquatic environments. The objective was to develop an effective and sustainable adsorbent to mitigate eutrophication caused by excess phosphates in water bodies. La-CCA exhibited a remarkable phosphate adsorption capacity, peaking at 44.32 mg/g under optimal conditions, demonstrating its efficiency as an adsorbent. The novelty of this work lies in the use of waste paper as a raw material, coupled with lanthanum modification, which enhanced adsorption performance through multiple mechanisms, including electrostatic interactions, ligand exchange, and inner-sphere complexation. The study also discussed the retention of the microfibrous structure of cellulose, contributing to the material’s stability and functionality. Comprehensive analyses including zeta potential, FTIR, and XPS elucidate the underlying adsorption mechanisms. La-CCA was demonstrated to be easily separable from solutions with minimal lanthanum leaching, particularly under conditions above pH 3.0, underscoring its potential for practical applications in phosphate removal from nutrient-enriched waters.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
WATER SCIENCE AND TECHNOLOGY
·
2022
·Vol. 86
·期 5
·1017-1033
·
IF 2.43
Fu Chengbin,Li Ye,Zuo Yangyang,Li Bolin,Liu Chang,Liu Dongxue,Fu Yan,Yin Yixin
It is essential to solve the problem of phosphorus pollution in urban landscape water and reduce the degree of eutrophication. In this paper, lanthanum-modified bentonite (La-B) was prepared by high-temperature calcination and liquid-phase precipitation. Then La-B was modified with chitosan to prepare a low-cost environment-friendly functional material: lanthanum/chitosan co-modified bentonite (La-BC). It can reach the adsorption equilibrium within 30 min, and the maximum adsorption capacity is 15.5 mg/g (initial phosphate concentration 50 mg/L); when the target concentration is 2 mg/L, the removal rate can reach 98.5%. La-BC has a stronger anti-interference ability to common coexisting anions SO 4 2− , HCO 3 − , NO 3 − and Cl − in the urban landscape water body. La-BC has excellent performance in weakly acidic to neutral water, and its pH applicable range has been improved, making it possible to apply in practical water. The fitting results show that the adsorption behavior conforms to the pseudo-second-order kinetic model and the Freundlich model. After 5 regenerations, the removal efficiency remained around 80%. In the actual water test results, the phosphate concentration can be controlled below 0.1 mg/L and the removal rate is above 75%. Due to its low cost and reusability, it has great potential in the practical application of phosphate removal from landscape water. La-BC high-efficiency phosphorus removal agent was prepared by high temperature calcination and liquid phase precipitation. La-BC has shown excellent competitiveness in actual landscape water application and regeneration experiments. A possible mechanism of La-BC adsorption of phosphate has been studied and analyzed.
研究领域:
环境科学
·
材料科学
·
水污染控制
✓ 已验证
DOI
高影响因子
Materials
·
2024
·Vol. 17
·期 3
·766
·
IF 3.1
Wei Li,Pengcheng Xie,Haiyang Zhou,Huiying Zhao,Bo Yang,Jian Xiong
In this study, tea waste was used as a raw material, and TBC (tea waste biochar) was prepared by pyrolysis at 700 °C. La(NO3)3·6H2O was used as the modifier to optimize one-way modification; the orthogonal experiment was undertaken to determine the optimal preparation conditions; and La-TBC (lanthanum-modified biochar) was obtained. The key factors for the adsorption of fluoride by La-TBC were investigated by means of batch adsorption experiments, and kinetics and isothermal adsorption experiments were carried out on the adsorption of fluoride in geothermal hot spring water. The adsorption mechanism of fluoride by La-TBC was analyzed via characterization methods such as SEM-EDS (Scanning Electron Microscope and Energy Dispersive Spectrometer), BET (Brunauer–Emmett–Teller), FTIR (Fourier transform infrared), XRD (X-ray diffraction), and so on. The results show that La-TBC had the best adsorption effect on fluoride at pH 7. The process of adsorption of fluoride follows the pseudo-second-order kinetics and Langmuir isothermal model, and the maximum theoretical adsorption quantity was 47.47 mg/g at 80 °C, while the removal rate of fluoride from the actual geothermal hot spring water reached more than 95%. The adsorption process was dominated by the monolayer adsorption of chemicals, and the mechanisms mainly include pore filling, ion exchange, and electrostatic interaction.
研究领域:
环境科学
·
材料科学
✓ 已验证
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2015
·
IF 4.504
Fengying Ye,Chenqi Feng,Jibo Jiang,Sheng Han
A bare glassy carbon electrode (GCE) was reformed by carboxylated graphene oxide/lanthanum, and the modified electrode, called GO-COOLa/GCE, was fabricated for simultaneously detecting dopamine (DA), uric acid (UA) and nitrite (NO 2 − ) by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and amperometry. Several factors which affected the electrocatalytic activity of the GO-COOLa/GCE electrode, such as the effect of pH, scan rate and concentration were studied. Due to the combination of carboxylated graphene oxide and lanthanum ions, the GO-COOLa/GCE sensor showed rapid response, excellent selectivity and high catalytic performance toward the electrooxidation of DA, UA and NO 2 − . In optimized conditions, two linear response ranges for determining DA were obtained over ranges of 0.01-1.96×10 2 μM and 1.96×10 2 -1.23×10 3 μM with detection limit of 0.018 μM (S/N = 3). And the responses of the GO-COOLa/GCE electrode for UA and NO 2 − were linear in the region of 1-1.53×10 3 μM and 1-2.75×10 3 μM with detection limits of 0.058 μM and 0.070 μM, respectively. Furthermore, this reformed electrode was successfully used to the detection of DA, UA and NO 2 − in real urine and serum samples, showing its promising application in the electroanalysis of real samples.
研究领域:
分析化学
·
生物医学工程
✓ 已验证
DOI
高影响因子
ACS ES&T Engineering
·
2021
·
IF 0
Yanyang Zhang,Bo Kong,Zhaoyang Shen,Jieshu Qian,Bingcai Pan
In situ immobilization of phosphorus (P) by using P binding agents is a facile and effective strategy for eutrophication control. Currently, the most successful commercial agent (Phoslock, a lanthanum modified bentonite, LMB) still suffers low P removal efficiency from natural waters of complex chemistry, largely due to the competitive complexation of the active La species by humic substances (HAs) and bicarbonate. Herein, we describe an attempt to address these issues by intercalating La into Mg/Fe layered double hydroxides, a pyroaurite-like anionic clay, to obtain a hybrid agent (denoted L-CMF-1.0) of phosphate capacity five times higher than that of LMB. More attractively, the binding stability and capacity of L-CMF-1.0 toward P were significantly enhanced in the presence of HAs and bicarbonate, resulting in a high La usage (P/La ratio at ∼1.30). A continuous P immobilization test in the simulated natural waters validates that the addition of L-CMF-1.0 at 0.12 g/L could result in an efficient P removal from 580 μg/L to <100 μg/L within 38 days, outperforming LMB within 10 days only under otherwise identical conditions. Such improvement results from the rational design of the agent structure, i.e., the host, not only contributes to the direct P uptake but also provides a flexible nanoshelter microenvironment to favor the specific La–P interaction under complex solution chemistry. This work is believed to shed new light on the rational design of P binding agent for enhanced eutrophication control.
研究领域:
环境科学
·
水处理技术
✓ 已验证
DOI
MATERIALS CHEMISTRY AND PHYSICS
·
2020
·
IF 3.408
A.V. Pashchenko,N.A. Liedienov,Quanjun Li,I.I. Makoed,D.D. Tatarchuk,Y.V. Didenko,A.I. Gudimenko,V.P. Kladko,Lina Jiang,Liping Li,V.G. Pogrebnyak,G.G. Levchenko
Single-phase lanthanum-modified bismuth ferrite multiferroic ceramics have been synthesized by the rapid liquid-phase sintering (RLS) method. Phase composition, crystal structure, microstructure and dielectric properties of the Bi 0·9 La 0·1 FeO 3 multiferroic have been studied using TG/DTA, XRD , SEM, capacitive and composite dielectric resonator methods. It has been established that the optimal conditions for formation of a perovskite Bi 0·9 La 0·1 FeO 3 structure are 850 °C after 5 min in air. It has been found that the compacting pressure of the initial mixture of precursors from 90 to 1090 MPa can change the dielectric constant by ~25% in the low-frequency range and by ~80% in the microwave range up to complete elimination of the elastic polarization mechanism. The use of the RLS method under various compacting pressures opens additional possibilities for creating multifunctional multiferroics with controlled magnetoelectric coupling.
研究领域:
材料科学
·
物理学
✓ 已验证
产品关联
DOI
高影响因子
Environmental Technology & Innovation
·
2021
·
IF 5.263
Fei Yu,Zhengqu Yang,Xiaochen Zhang,Peiyu Yang,Jie Ma
Ciprofloxacin hydrochloride (CIP) is a kind of typical antibiotic, which would cause a potential hazard to natural water if discharged in a large amount. In this study, lanthanum-modified κ -carrageenan/sodium alginate aerogels (La/ κ -car/SA) were successfully synthesized for the first time by the sol–gel method. And the removal of CIP from aqueous solutions was investigated using La/ κ -car/SA aerogels. The results showed that the adsorption followed the pseudo-second-order kinetic model and the Langmuir–Freundlich isotherm model. The adsorption equilibrium time was about 16 h and the maximum adsorption capacity was 179.97 mg g −1 . Coexisting microplastics had a synergistic effect with La/ κ -car/SA, thereby promoting the adsorption capacity on CIP. Humic acid and heavy metal ions had no significant effect on the adsorption of La/ κ -car/SA aerogels, whereas the ionic strength and strong acid/alkaline environment would inhibit the adsorption of CIP. Using HCl solution (pH = 2) as eluent, the desorption rate of CIP could reach 98% within 80 min. The breakthrough time of dynamic adsorption was positively correlated with the mass of adsorbent, and the dynamic adsorption curve was in accordance with the Yoon–Nelson model. Ciprofloxacin hydrochloride be removed by La/ κ -car/SA aerogels successfully through a mixed mechanism of electrostatic interaction, π - π electron donor–acceptor interaction, hydrogen bonding, and hydrophobic interaction. As a result, La/ κ -car/SA aerogels can serve as a kind of novel adsorbent that effectively reduces CIP pollution due to its availability, efficiency, stability, and no secondary pollution.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Huangbo Chen,Xinqing Zhang,Yuxin Xiao,Shaogui Yang,Shiyin Li,Jijie Kong,Cheng Sun,Huan He
The problem of blue algae accumulation can be alleviated by utilizing blue algae as biomass for resource utilization, which can remove excess phosphates from water to alleviate eutrophication. Herein, Magnesium (Mg) and/or lanthanum (La) were used to modify biochar via high-temperature slow pyrolysis with blue algae as the raw biomass. These modified biochars exhibited abundant carbon (18.0 %-50.3 %), oxygen content (17.4 %-49.1 %), along with a high specific surface area (82.26–233.80 m 2 /g). The surface of metal-modified biochar was enriched with hydroxyl and carboxyl groups and metal elements were efficiently incorporated into biochars. Adsorption kinetic and isotherm experiments were conducted under the optimal pyrolysis temperature of 600 °C, pH of 6.0, and adsorbent dosage of 2.0 g/L. The adsorption kinetics studies by metal-modified biochars for phosphate fitted well pseudo-second-order model Redlich-Peterson isotherm model. Biochar modified by Mg and La exhibited the highest removal efficiency (97.8 %) for phosphate at adsorption equilibrium. The adsorption mechanism involved the electrostatic interaction between hydroxylated metal oxides and negatively charged phosphate ions and the precipitation of phosphate ions through chemical reactions with metal oxides in the solution. After phosphate adsorption, the pristine and metal-modified biochars derived from blue algae were applied as the soil amendment. Biochar adsorbed phosphate apparently improved the germination rate of seeds facilitated the height, width, weight, and chlorophyll content of vegetable seedlings, and induced oxidative stress, which proved that the biochar recovered after adsorption was a high-quality soil amendment. This study provides a new approach for the treatment of phosphate wastewater and the algae application.
研究领域:
环境科学
·
农业科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）