CARBOHYDRATE POLYMERS
·
2022
·
IF 10.723
Yadong Wang,Jun Yuan,Li Ma,Xianze Yin,Zongmin Zhu,Pingan Song
As a very promising biodegradable polymer, polylactic acid (PLA) has been applied in various fields. Unfortunately, the disadvantages of flammability and large amounts of molten droplets limit its application. In this work, we constructed a novel flame-retardant system by combining the as-prepared bio-based chitosan derivative (CS-TE) and aluminum hypophosphite (AP), and used it to improve the flame retardancy and anti-dripping property. When 3.75 wt% CS-TE and 11.25 wt% AP were incorporated into PLA, the PLA composite had a limiting oxygen index of 28.5 % and achieved a UL-94 V-0 rating as well as showed excellent anti-dripping behavior. Meanwhile, the peak heat release rate and total smoke production decreased by 52.3 % and 73.4 % respectively.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
PubMed
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2019
·
IF 3.42
Yinchun Fang,Xinhua Liu,Xuchen Tao
High flammability and dripping restrict the widely applications of PET fiber, a lot of efforts have been made to overcome these problems. In this paper, chitosan (CH) and ammonium polyphosphate (APP) were used as the intumescent flame retardant system which was constructed on PET fabrics surface via the Layer-by-layer (LBL) assembly technique. The flame retardancy and anti-dripping performance of the coated PET fabrics were determined by LOI values and vertical burning test. The results revealed that both the flame retardancy and anti-dripping performance of the LBL assembly coated PET fabrics were improved, particularly when the CH/APP bilayer was over 10 BL, the dripping phenomenon was eliminated. Alkali treatment of PET fabrics before LBL assembly effect on the flame retardancy and anti-dripping performance was investigated. The results indicated that alkali treatment of the PET fabrics would promote the combination of PET fabrics and the charged flame retardants. Thermogravimetric analysis (TGA) was used to investigate the thermal stability of uncoated and LBL assembly coated PET fabrics. The results of TGA revealed that LBL assembly coated PET fabrics would promote the char formation indicating the obviously condensed phase flame retardant action. The SEM images of the char residues revealed that LBL assembly coated PET fabrics would promote the formation of intumescent char residues with lots of microporous indicating the better anti-dripping performance.
研究领域:
材料科学
·
纺织工程
✓ 已验证
产品关联
DOI
高影响因子
Frontiers of Chemical Science and Engineering
·
2020
·Vol. 15
·期 2
·340-350
·
IF 3.552
Zhang Wei,Xu Boren,Gong Caihong,Yi Chunwang,Zhang Shen
In this study, a facile and environmentally friendly method with low energy consumption for preparing nanoscale AgCl and BaSO 4 co-precipitates (AgCl@BaSO 4 co-precipitates) was developed based on the metathetical reaction. Then, the dried co-precipitates were melt-compounded with polyamide 6 (PA6) resins at a specified mass ratio in a twin-screw extruder. The results demonstrated that in the absence of any coating agent or carrier, the nanoparticles of AgCl@BaSO 4 co-precipitates were homogeneously dispersed in the PA6 matrix. Further analysis showed that after the addition of AgCl@BaSO 4 co-precipitates, the antibacterial performance, along with the flame-retardance and anti-dripping characteristics of PA6, was enhanced significantly. In addition, the PA6 composites possessed high spinnability in producing preoriented yarn.
研究领域:
材料科学
·
纳米技术
·
高分子化学
✓ 已验证
DOI
高影响因子
Journal of Engineered Fibers and Fabrics
·
2019
·
IF 0.474
Yinchun Fang,Xinhua Liu,Cuie Wang
Layer-by-layer assembly is a simple and effective method which has been widely studied to improve the flame retardancy of textiles in recent years. In this article, flame-retardant and anti-dripping polyethylene terephthalate fabrics were successfully prepared by layer-by-layer assembly branched polyethylenimine and ammonium polyphosphate on their surface. The results of limiting oxygen index values and vertical burning test revealed that the flame retardancy and anti-dripping performance of polyethylene terephthalate fabrics were improved after the layer-by-layer assembly treatment; especially, the dripping phenomenon was eliminated when the number of branched polyethylenimine/ammonium polyphosphate bilayers was over 10. The influence of alkali treatment of polyethylene terephthalate fabrics before layer-by-layer assembly was also investigated. The results showed that alkali treatment of the polyethylene terephthalate fabrics would promote the combination of polyethylene terephthalate fabrics and the charged flame retardants indicating better flame retardancy. The results of thermogravimetric analysis revealed that layer-by-layer assembly treatment of polyethylene terephthalate fabrics would promote char formation both under the nitrogen atmosphere and under the air atmosphere which may act through condensed phase action. The scanning electron microscopy images of the char residues revealed that the layer-by-layer assembly treatment of polyethylene terephthalate fabrics would promote the formation of a compact and intact char residue, which was beneficial for the improvement of flame retardancy and anti-dripping performance. This research would provide the experimental basis for the effective flame retardancy and anti-dripping performance of polyethylene terephthalate fabric.
研究领域:
材料科学
·
纺织工程
·
高分子化学
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2019
·
IF 3.42
Zhengmao Ding,Jie Li,Wei Xin,Guangpu Zhang,Yunjun Luo
A series of low gloss organic montmorillonite/waterborne polyurethane nanocomposite (OWPU) coatings with polycaprolactone (PCL) and hydroxyl terminated polybutadiene (HTPB) were prepared, characterized and then applied to polyvinyl chloride leather. Small-angle XRD and TEM examinations indicated that montmorillonite was exfoliated into individual single-layer nanosheets in HTPB, and retained separate shapes in subsequent synthesis and preparation. The OWPU dispersions with higher nanosheets contents exhibited a larger average particle size and a less negative zeta potential obtained through DLS. A rougher coating surface topography of OWPU compared with pristine WPU was observed by SEM, which reduced the 60° gloss to 4.6 GU within the matt range. Moreover, TGA results indicated that the nanosheets effectively increased thermal stability of hard segments and soft segments derived from PCL, but had little effect on that of soft segments derived from HTPB. Furthermore, rheological analysis confirmed the nanosheets promoted cross-linking and cyclization of HTPB at high temperature, thereby imparting anti-dripping properties to OWPU coatings. Cone calorimeter test and SEM results showed that flame retardancy of OWPU was improved by forming a charred layer with sheet-cluster structure. In addition, incorporation of the nanosheets was also capable of changing the surface touch feeling of OWPU coatings from sticky to some dry alike.
研究领域:
材料科学
·
化学工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）