MOLECULES
·
2023
·Vol. 28
·期 23
·7894
·
IF 4.6
Jia-Bin Xiong,Yong-Juan Zhou,Shi-Hui Wang,Zhang-Qi Xiong,Zi-Kun Zhang,Shan-Shan Zhang,Chen-Kunlun Zhang,Chao-Fan Xu,Guo-Qun Liu
MOF (metal organic framework) materials have been used as functional materials in a number of fields due to their diverse spatial tunability, which produces rich porous structures with stable and continuous pores and a high specific surface area. A triboelectric nanogenerator can convert trace mechanical energy into electrical energy, and the application of MOF materials to triboelectric nanogenerators has been intensively studied. In this work, we report on two MOFs with similar spatial structures, and the modulation of the end microstructures was achieved using the difference in F content. The output performance of friction power generation increases with the increase in F content, and the obtained polyacidic ligand materials can be used to construct self-powered corrosion protection systems, which can effectively protect metallic materials from corrosion.Keywords:TENG;MOF;corrosion protection;cathodic protection
研究领域:
材料科学
·
能量转换
·
腐蚀工程
✓ 已验证
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2023
·
IF 6.6
Yuhua Dong,Xueyan Du,Yutong Xie,Kexin Wu,Qiong Zhou
A quaternary composite of Ti 3 C 2 /TiO 2 /TiN/polyaniline was synthesized by doping TiN nanoparticles on the calcined Ti 3 C 2 MXene nanosheets , and then polyaniline was deposited through chemical oxidation . The bandgap and flat band potential of composite were determined by X-ray diffraction and ultraviolet–visible spectroscopy. In order to prepare photoanode and photocathodic protective coating, the quaternary composite was added to the polyvinyl alcohol solution and epoxy resin to. Photoelectrochemical results indicated that photoanode and relevant photocathodic protective coating had similar photocurrent with about 5 μA cm −2 , but open circuit potential of the photocathodic protective coating was more negative than that of photoanode. The R ct of photoanode with illumination was 5.5 kΩ, while that of photocathodic coating was 136 kΩ. The 304 stainless steel could be well protected by the photoanode and photocathodic protective coating whether illumination or not, due to synergistic effect of local surface plasmonic resonance of TiN, “electron pool” of polyaniline and non-interfacial contact of TiO 2 and MXene. Moreover, the epoxy resin in the photocathodic coating could act as a kind of physical barrier in the dark environment. Additionally, results of long-term protection test indicated that the photocathodic protective coating under intermittent illumination had better protection property than that of the coating without illumination.
研究领域:
材料科学
·
电化学
·
防腐蚀工程
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2019
·Vol. 9
·期 12
·1067
·
IF 3.444
Zheng Ma,Xiumin Ma,Xiutong Wang,Nazhen Liu,Xuehui Liu,Baorong Hou
In this work, the photo-catalytic activity of TiO2is considerably enhanced via sensitization with CdIn2S4, and its application for protecting Q235 from corrosion in splash zones is examined. TiO2nanotube arrays (NTAs) are prepared on a flat Ti substrate via two-step anodization. CdIn2S4 is deposited on the surface of TiO2NTAs by hydrothermal reaction. TiO2NTAs with enormous specific surface areas and large-diameter hollow nanostructures are found to benefit the immobilization of CdIn2S4. As a narrow band gap semiconductor, CdIn2S4is able to extend the light absorption range of TiO2, and the construction of an n–n type hetero-junction accelerates the separation of carriers. Strong solar light, which accelerates the corrosion of Q235 in the splash zone area, is converted into the necessary condition for protecting Q235 from corrosion. In this work, TiO2is sensitized with MoS2microspheres (MoS2/TiO2nanocomposites), which were prepared on a flat Ti substrate via a two-step anodization and hydrothermal method, sequentially.Keywords:corrosion;photocathodic protection;visible light;narrow bandgap semiconductor;TiO2
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2019
·Vol. 30
·期 16
·15267-15276
·
IF 2.195
Zhang Qingji,Jing Jiangping,Chen Zhuoyuan,Sun Mengmeng,Li Jiarun,Li Yan,Xu Likun
g-C 3 N 4 is a promising material for the application in the area of photoelectrochemical cathodic protection. However, it suffers from limited light absorption and lower charge separation efficiency. In this work, a N defects and C deposition co-modified g-C 3 N 4 , C–g-C 3 N x , was prepared by NaOH-assisted sintering and ethanol-assisted hydrothermal treatment. The presence of N defects and C deposition was verified by the XRD, SEM and XPS tests. The N defects changed the band structure of g-C 3 N 4 by lowering down the conduction band position, therefore widening the light absorption range of g-C 3 N 4 . In addition, the N defects and C deposition co-modification promotes the charge transfer process of g-C 3 N 4 , leading to increased separation efficiency of the photogenerated charge carriers. Therefore, C–g-C 3 N x shows enhanced photoelectrochemical cathodic protection performance for the coupled 316L stainless steel. It can provide a photoinduced potential drop of 120 mV and a photoinduced current density of 9.1 μA cm −2 , which is three times that of pristine g-C 3 N 4 .
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2022
·
IF 4.865
Jiajia Cai,Lingna Kong,Xiangxuan Tang,Jianmin Wang,Zhihong Xie,Xianxuan Wang,Qian Xie,Qiyan Xu
Hematite (α-Fe 2 O 3 ) is one of the most promising candidates as a photoanode for photocathodic protection (PCP) of 304SS. However, serious charge recombination has hindered the application. In this work, we verified the feasibility of constructing heterojunction for enhancing the PCP performance. α-Fe 2 O 3 @Bi 2 S 3 can not only broaden the solar light absorption region but also provide a built-in electric field to improve charge separation and close junctions for charge transport. When α-Fe 2 O 3 @Bi 2 S 3 was coupled with 304SS, the OCP under illumination negatively shifted to −0.788 V Ag/AgCl , which was ca . 600 mV negative than the corrosion potential of 304SS. The photoinduced current density reached 32 μA cm −2 , outperforming the bare Bi 2 S 3 and α-Fe 2 O 3 . The formation of a type II heterojunction between Bi 2 S 3 and α-Fe 2 O 3 was proposed and verified by the electrochemical impedance measurements.
研究领域:
材料科学
·
电化学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Yuying Yang,Mengmeng Sun,Zhuoyuan Chen,Hengyue Xu,Xiaohui Wang,Jizhou Duan,Baorong Hou
Solar energy-driven photoinduced cathodic protection (PICP) technology utilizes solar energy to protect marine metallic structures against severe marine corrosion. To enhance the solar energy utilization and strengthen dark-state application for realizing long-term protection, herein, a 3D nanothorn cluster-like WO 3 /ZnO/Zn-Bi 2 S 3 multijunction with electron-storage characteristic and adjustable energy band was constructed. It exhibited an enhanced continuous release of photogenerated electron and sustained cathodic protection in dark conditions. Exposed to only 100 s of simulated sunlight irradiation, the WO 3 /ZnO/Zn-Bi 2 S 3 could store 5.27×10 −2 C electrons and provide up to 5460 s of sustained CP for the coupled metal after light stops, which was 10.8 and 3.5 times higher than those of WO 3 /ZnO (4.89×10 −3 C) and WO 3 /Zn-Bi 2 S 3 (1.51×10 −2 C), respectively. The WO 3 nanothorn cluster-like substrate with reversible valence transformation of W 6+ /W 5+ together with the large surface area and one-dimensional transmission path can store photogenerated electrons under illumination and release photogenerated electrons after light stops efficiently. Notably, the tri-phase heterojunction with introduction of intermediate “Carrier Springboard” ZnO between WO 3 and Zn-Bi 2 S 3 contributed to the building of well-matched energy band gradient to strengthen the directional backward transfer of photogenerated electrons and holes. The energy band of Bi 2 S 3 sensitizer was adjusted towards negative direction by doping with zinc element to boost PICP application performance. The reversible valence transformation of Bi 3+ /Bi 5+ could promote the consumption of photogenerated holes. These synergistically enhanced the sustained PICP performance of the WO 3 /ZnO/Zn-Bi 2 S 3 photoelectrode both in dark and light conditions. This design shed light on energy-storage photoelectrodes for long-term PICP of metallic materials.
研究领域:
材料科学
·
腐蚀与防护
·
太阳能技术
✓ 已验证
产品关联
DOI
高影响因子
Materials Today Communications
·
2024
·
IF 3.7
Zemin Zhou,Ming Li,Yu Hu,Zhipeng Chen
Employing a photoanode with energy self-storage capability is crucial to provide continuous photocathodic protection (PCP) for metal under intermittent irradiation. In this work, NiO, a hole collector, was coupled with WO 3 /BiVO 4 to improve photoelectrochemical properties and photocathodic protection ability for stainless steel (316 SS). The optimal WO 3 /BiVO 4 /NiO photoanode (WB2N2) exhibited 35.1% and 26.6% increase in energy storage capacity compared with WO 3 and WO 3 /BiVO 4 under illumination, respectively. The open-circuit potential (OCP) of 316SS coupled with irradiated WB2N2 was reduced from −143 mV (uncoupled OCP) to −726 mV, and the electrode potential can maintain at −540 mV after light was turned off. It was calculated that electrons of about 1.286×10 −2 C was transferred from WB2N2 to 316 SS after 50 s illumination, which was 11.7 and 5.1 times of that WO 3 and WB2 passed to 316SS, respectively, confirming the best persistent PCP performance of WB2N2 in the absence of light. The positive role of NiO on the PCP and persistent PCP performance was analyzed. The long-term OCP test and XRD analysis proved the stability of WO 3 /BiVO 4 /NiO in PCP performance and chemical composition .
研究领域:
材料科学
·
电化学
·
腐蚀科学
✓ 已验证
DOI
高影响因子
Materials
·
2021
·Vol. 14
·期 10
·2629
·
IF 3.623
Shimin Chen,Bo Li,Rengui Xiao,Huanhu Luo,Siwu Yu,Jinghang He,Xia Liao
In this work, a ternary TiO2/Graphene oxide/Polyaniline (TiO2/GO/PANI) nanocomposite was synthesized by in situ oxidation and use as a filler on epoxy resin (TiO2/GO/PANI/EP), a bifunctional in situ protective coating has been developed and reinforced the Q235 carbon steel protection against corrosion. The structure and optical properties of the obtained composites are characterized by XRD, FTIR, and UV–vis. Compared to bare TiO2and bare Q235, the TiO2/GO/PANI/EP coating exhibited prominent photoelectrochemical properties, such as the photocurrent density increased 0.06 A/cm2and the corrosion potential shifted from −651 mV to −851 mV, respectively. The results show that the TiO2/GO/PANI nanocomposite has an extended light absorption range and the effective separation of electron-hole pairs improves the photoelectrochemical performance, and also provides cathodic protection to Q235 steel under dark conditions. The TiO2/GO/PANI/EP coating can isolate the Q235 steel from the external corrosive environment, and may generally be regarded a useful protective barrier coating to metallic materials. When the TiO2/GO/PANI composite is dispersed in the EP, the compactness of the coating is improved and the protective barrier effect is enhanced.Keywords:TiO2/GO/PANI nanocomposite;epoxy resin;barrier protection;photocathode protection
研究领域:
材料科学
·
腐蚀工程
·
纳米技术
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 24
·13237-13247
·
IF 2.936
Feng Yang,Tong Liu,Jingyu Li,Shihui Qiu,Haichao Zhao
An epoxy zinc-rich composite coating containing self-doped conducting sulfonated polyaniline (SPANi) nanofiber was prepared and the corrosion resistance of as-prepared coatings on Q235 substrate studied by open circuit potential (OCP), electrochemical impedance spectroscopy (EIS) and scanning vibrating electrode technique (SVET). Results suggested that a zinc-rich coating with addition of 1.0 wt% SPANi could enhance the cathodic protection time and barrier performance. To study corrosion diffusion, artificial scratch and adhesion strength were investigated via the salt spray test and pull-off test, respectively. Finally, the passivating action of coatings was demonstrated by analyses of corrosion products via X-ray diffraction spectroscopy.
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Oceanology and Limnology
·
2020
·Vol. 38
·期 5
·1517-1531
·
IF 0.617
Tian Jing,Chen Zhuoyuan,Jing Jiangping,Feng Chang,Sun Mengmeng,Li Weibing
The Cu 2 O/TiO 2 p-n heterojunction composite photoelectrodes were prepared by depositing Cu 2 O nanoparticles on the surface of TiO 2 nanotubes via anodic oxidation and constant current deposition. Field emission scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) analyses showed that Cu 2 O nanoparticles not only deposited on the surface of TiO 2 nanotube array, but also on the wall of TiO 2 nanotubes. The Cu 2 O deposition amount could be adjusted by changing the deposition time. The photoelectrochemical cathodic protection (PECCP) performance of the prepared photoelectrodes for 316L stainless steel (SS) was tested under visible light. The constant current deposition time had a significant effect on the PECCP performance of Cu 2 O/TiO 2 -X photoelectrodes and Cu 2 O/TiO 2 -20 had the best PECCP performance for the coupled 316L SS. This was attributed to the appropriate amount and thickness of Cu 2 O to form p-n heterojunctions with TiO 2 , in which separation of the photogenerated carriers was accelerated and transfer of the photogenerated electrons to 316L SS for PECCP was facilitated.
研究领域:
材料科学
·
电化学
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
SURFACE & COATINGS TECHNOLOGY
·
2021
·
IF 4.158
Ming-Jie Zhou,Teng Xu,Ji-Ming Hu
Layered double hydroxide (LDH) films have been used to protect metal substrates because of their superior barrier performance and capability of capturing corrosive anions (such as Cl − ) by exchange with interlayer anions. In this preliminary work, we determined that some photoactive LDHs (such as NiAl-LDH) can also provide cathodic protection to metals under light illumination, stemming from the light-generated electrons of semiconducting LDHs, if the energy level of the conduction band of LDHs is higher than the Fermi level of the metal. The current experimental results prove that the corrosion resistance of stainless steel is enhanced by the attached NiAl-LDH films in the dark and is further increased under light illumination due to photogenerated cathodic protection.
研究领域:
材料科学
·
电化学
·
表面工程
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CLAY SCIENCE
·
2023
·
IF 5.6
Ao Jiang,Yuli Di,Shanhua Chen,Dafu Zhang,Xingyu Chen,Zhengdong Zhang,Xinyi Zhang,Qi Dong
The sol-gel method was used to prepare a series of muscovite/TiO 2 heterostructures for photocathodic protection of 304 stainless steels (304SS). The effects of different mass ratio of muscovite to TiO 2 (1:0.5, 1:1 and 1:1.5, denoted as MT-0.5, MT-1 and MT-1.5, respectively) on the crystal phase, grain size, light absorption properties and photoelectrochemical properties of TiO 2 and muscovite/TiO 2 heterostructures were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM) and UV–visible diffuse reflection spectroscopy (UV–vis DRS). The corrosion resistances and photoelectrochemical properties of the 304SS coated with muscovite/TiO 2 heterostructures (304SS/MT) were studied through corrosion immersion test and electrochemical workstation in 3.5 wt% NaCl solution, respectively. In addition, Tafel curves and the electrochemical impedance spectroscopy (EIS) measurements were carried out to evaluate the photogenerated electron separation and transfer efficiency, and the interfacial charge transfer resistance of the 304SS and 304SS/MT electrodes, respectively. The time-dependent photocurrent responses of the MT-1 heterostructures demonstrated an enhanced photo-generated cathodic protection performance for 304SS substrates under visible light irradiation compared to TiO 2 . A photoinduced potential drop value for 304SS coated with MT-1 in 3.5 wt% NaCl solution was −0.54 V (vs. SCE). After immersion test, the corrosion image analyses of the 304SS, 304SS-MT, and 304SS coated with physically mixed muscovite/TiO 2 samples showed that the 304SS/MT-1 exhibits the best corrosion resistances . After connecting with 304SS/MT-1 in 3.5 wt% NaCl solution, the corrosion current densities ( i corr ) of 304SS increased significantly under the white light illumination, indicating more photoinduced electrons were migrated from the muscovite/TiO 2 heterostructures to the 304SS compared with that from pure TiO 2 . Furthermore, the simulated charge transfer resistance ( R ct ) of 304SS/MT-1 electrode is smaller than that of the 304SS electrode coated with TiO 2 , indicating that there exists an effective separation of the photogenerated electrons and holes, and a fast interfacial charge transfer after coating muscovite/TiO 2 heterostructures.
研究领域:
材料科学
·
电化学
·
表面工程
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）