INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES
·
2023
·Vol. 24
·期 8
·7649
·
IF 5.6
Yanjing Liu,Xiyue Li,Yuezhou Liu,Yaping Huang,Fuming Wang,Yongfang Qian,Ying Wang
Due to their high porosity, large specific surface area, and structural similarity with the extracellular matrix (ECM), electrospun nanofiber membranes are often endowed with the antibacterial properties for biomedical applications. The purpose of this study was to synthesize nano-structured Sc2O3-MgO by doping Sc3+, calcining at 600 °C, and then loading it onto the PCL/PVP substrates with electrospinning technology with the aim of developing new efficient antibacterial nanofiber membranes for tissue engineering. A scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDS) were used to study the morphology of all formulations and analyze the types and contents of the elements, and an X-ray diffraction (XRD), thermogravimetric analysis (TGA), and Fourier transform attenuated total reflection infrared spectroscopy (ATR-FTIR) were used for further analysis. The experimental results showed that the PCL/PVP (SMCV-2.0) nanofibers loaded with 2.0 wt% Sc2O3-MgO were smooth and homogeneous with an average diameter of 252.6 nm; the antibacterial test indicated that a low load concentration of 2.0 wt% Sc2O3-MgO in PCL/PVP (SMCV-2.0) showed a 100% antibacterial rate againstEscherichia coli(E. coli).Keywords:nano-textured;Sc2O3-MgO;antibacterial;electrospinning
研究领域:
生物医学工程
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of the American Chemical Society
·
2014
·
IF 11.444
Huilin Hou,Lin Wang,Fengmei Gao,Guodong Wei,Bin Tang,Weiyou Yang,Tom Wu
Recently, preparation of mesoporous fibers has attracted extensive attentions because of their unique and broad applications in photocatalysis, optoelectronics, and biomaterials. However, it remains a great challenge to fabricate thoroughly mesoporous nanofibers with high purity and uniformity. Here, we report a general, simple and cost-effective strategy, namely, foaming-assisted electrospinning, for producing mesoporous nanofibers with high purity and enhanced specific surface areas. As a proof of concept, the as-fabricated mesoporous TiO2 fibers exhibit much higher photocatalytic activity and stability than both the conventional solid counterparts and the commercially available P25. The abundant vapors released from the introduced foaming agents are responsible for the creation of pores with uniform spatial distribution in the spun precursor fibers. The present work represents a critically important step in advancing the electrospinning technique for generating mesoporous fibers in a facile and universal manner.
研究领域:
材料科学
·
纳米技术
·
电化学
·
催化
·
高分子科学
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Cen Zhang,Sicheng Li,Di Chen,Wenjing Lu,Chaogeng Xiao
Multicore-shell nanofibers were fabricated by integrating emulsion electrospinning and coaxial electrospinning technologies, in which the multicore section of the nanofibers was prepared by electrospinning of gelatin-stabilized emulsions, and the shell layer was coaxially electrospun from zein solution. Coaxial electrospinning of zein helped form emulsion-based electrospun fibers with bead-in-string, spindle-like, and straight morphologies. The hydrogen bonding between gelatin and zein contributed to the enhanced thermal properties of coaxially electrospun nanofibers. The coating of zein as shell greatly improved fiber surface wettability and mechanical strength. The release behavior of curcumin from the nanofibers was dominated by Fickian diffusion, and the zein shell as a physical barrier favored the prolonged release of curcumin and then the long-lasting antibacterial activity towards Escherichia coli . This work thus gives an insight into the development of the nanofibers by emulsion-coaxial electrospinning as encapsulation matrices for the application in food products.
研究领域:
食品科学
·
材料科学
·
生物医学工程
✓ 已验证
DOI
PubMed
高影响因子
Nanomaterials
·
2018
·Vol. 8
·期 11
·918
·
IF 3.504
Dan Tian,Chun-Hui He,Ji-Huan He
Electrospinning is now commercially used for the fabrication of nano/micro fibers. Compared with spider dragline silk, artificial fibers have poor mechanical properties. Unlike natural silk, which has a hierarchical structure with an approximate 3-fold symmetry, the molecular structure of spun fiber has neither folding nor orientation. To date, it is almost impossible to control molecule orientation during the spinning process. Here, we show that macromolecule orientation can be easily controlled using the laminar flow of fluid mechanics. A lasting laminar flow in a long needle can order macromolecules. We find that the orientation of macromolecules can greatly affect the morphology and mechanical properties of fibers. We expect our technology to be helpful for more sophisticated fabrication of fibers with ordered macromolecules and DNA-like twists.Keywords:macromolecule;laminar flow;electrospinning;hierarchical structure
研究领域:
材料科学
·
生物物理学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MOLECULES
·
2022
·Vol. 27
·期 2
·520
·
IF 4.927
Le Xu,Xi Liu,Jiao Jia,Hao Wu,Juan Xie,Yongtang Jia
Accurately and sensitively sensing and monitoring the pH in the environment is a key fundamental issue for human health. Nanomaterial and nanotechnology combined with fluorescent materials can be emerged as excellent possible methods to develop high-performance sensing membranes and help monitor pH. Herein, a series of fluorescent nanofiber membranes (NFMs) containing poly-1,8-naphthimide derivative-3-[dimethyl-[2-(2-methylprop-2-enoyloxy)ethyl]azaniumyl]propane-1-sulfonate (PNI-SBMA) are fabricated by electrospinning the solution of PNI-SBMA blended with poly(vinyl alcohol) (PVA). The surfactant-like functionalities in side chains of PNI-SBMA endow the NFMs with outstanding hydrophilicity, and the naphthimide derivatives are sensitive to pH by photoinduced electron transfer effect, which contribute to highly efficient pH fluorescence sensing applications of NFMs. Specifically, the PNI-SBMA/PVA NFM with a ratio of 1:9 (NFM2) shows high sensitivity and good cyclability to pH. This work demonstrates an effective strategy to realize a fluorescent sensor NFM that has a fast and sensitive response to pH, which will benefit its application of pH sensor monitoring in the water treatment process.Keywords:electrospinning;nanofibers;fluorescence;sensors;pH
研究领域:
材料科学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Xiao-Fei Liu,Jun Zhang,Jiang-Jun Liu,Qi-Hui Zhou,Zhongqiang Liu,Peng-Yue Hu,Zhe Yuan,Seeram Ramakrishna,Da-Peng Yang,Yun-Ze Long
Outdoor sports or combat missions, such as jungle adventures or counter-piracy operations, often involve bleeding and infected wounds. Due to the poor and limited medical conditions in these outdoor situations, patients prefer an easy way to simultaneously treat blood loss and wound infection by using the same outdoor device and the same material. In this study, a portable electrospinning device (150 g in weight) for outdoor use was developed, and CuS composite nanofibers could be green-synthesized by this portable electrospinning device. These CuS composite nanofibers can be deposited in situ onto the wound to simultaneously achieve rapid hemostasis outdoors and ablate superbacteria without requiring the use of other materials or devices. These in situ electrospun nanofibers possess better compactness on the rough wound surface than conventional nanofiber mats pressed onto the wound site. Thus, the nanofiber not only accelerates the hemostasis (<6 s) but also shortens the healing time of the wound with superbacterial infection (18 days). These bifunctional nanofibers combined with a portable electrospinning device for outdoor rapid hemostasis and simultaneous superbug ablation could notably benefit the outdoor first aid.
研究领域:
材料科学
·
生物医学工程
·
纳米技术
·
伤口护理
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 29
·16754-16766
·
IF 3.049
Jinhao Xu,Binjie Xin,Zhuoming Chen,Yan Liu,Yuansheng Zheng,Fuli Zhang
Directional water transport in garment materials plays a pivotal role in maintaining human thermal and wet comfort. In the present work, a new type of multilayer fibrous mat with the specific function of directional water transport was prepared via the combination of melt-electrospinning and solution-electrospinning. The polypropylene (PP) fibrous layer prepared by melt-electrospinning technology was located in the inner layer (next to the skin), while the polyacrylonitrile-containing hydrophilic nano-silica particles (PAN-SiO2) layer with remarkable hydrophilicity was located in the outer layer, which could effectively transport water to the outer surface of the composites. Treatment of the as-prepared PAN-SiO2/PP with an alkaline aqueous solution of dopamine not only increased the wettability of the PP layer, but also further improved the hydrophilicity of PAN-SiO2. A layer of cotton woven mesh was added between the TPP layer and TPAN-SiO2 to form a sandwich structure in order to accelerate water transport in the bilayered fibrous mats. The directional water transport, mechanical flexibility, and permeability of the prepared multilayered superfine fibrous mat were characterized systematically. The experimental results exhibited that TPAN-SiO2/cotton mesh/TPP exhibited an excellent accumulative one-way transport index (AOTI, 1071%), remarkable overall moisture management capacity (OMMC, 0.88), and reasonably high water vapor transport rate (WVT, 11.6 kg d−1 m−2), indicating it is a promising candidate for the development of novel textile materials for use in the field of sportswear for fast sweat release applications.
研究领域:
纺织材料科学
·
生物医学工程
·
功能材料
·
高分子材料
·
表面改性
·
湿传递性能
·
柔性电子器件基材
✓ 已验证
DOI
高影响因子
Advanced Sensor Research
·
2024
·
IF 0
Wei Ye,Yaxin Li,Xinyu Zhao,Yaocheng Yang,Xin Wang,Dongqing He,Lu Li,Dongyan Tang,Tengling Ye
This study introduces a novel fluorescent light-up electrospun membrane, integrating PbBr 2 , which serves as an exceptionally selective probe for the detection of cesium ions (Cs + ). Leveraging the superior optical properties of CsPbBr 3 perovskite nanocrystals (PNCs), the researchers employ electrospinning technology to fabricate a test strip, namely PbBr 2 @polyacrylonitrile (PbBr 2 @PAN) nanofiber membranes, capable of swiftly detecting Cs + in water merely by observing changes in the nanocrystals' luminescence with the naked eye. By the introduction of NH 4 + -modified montmorillonite (NH 4 + -MMT), PbBr 2 -MT@PAN nanofiber membranes is obtained. The selectivity and sensitivity to Cs + can be further improved because NH 4 + -MMT endows PbBr 2 -MT@PAN nanofiber membranes with the hydrophilic property and selective adsorption toward Cs + ions. The membrane's fabrication is simple, scalable, and cost-effective, with high cesium selectivity and sensitivity down to 44 ppb. This innovation enables efficient, on-site cesium monitoring critical for environmental safety and nuclear waste management.
研究领域:
分析化学
·
材料科学
·
环境监测
✓ 已验证
DOI
Polymers
·
2024
·Vol. 16
·期 5
·630
·
IF 4.7
Xiang Li,Qiao Xu
In this work, the EVOH/Ti3C2composite fibers were prepared via electrospinning and the effect of added Ti3C2on the structure and properties of electrospun EVOH fibrous membranes was further investigated. The morphology, crystal structure, thermal properties, wettability, tensile properties, as well as air permeability and water vapor permeability of as-prepared EVOH/Ti3C2composite fibers were studied. The Ti3C2is uniformly loaded onto the surface and inside the composite fiber and affects the fiber diameters. Furthermore, The Ti3C2self-orients along the fiber axis and does not change the crystal structure of the electrospun EVOH fibers, improving the crystallinity and thermal stability of the electrospun EVOH/Ti3C2fibrous membranes. With the increase in the Ti3C2concentration in the electrospinning polymer solution, the addition of Ti3C2not only rapidly improves the wettability of the fibrous membranes, but also enhances their air permeability, compared with the pristine electrospun EVOH fibrous membranes. The experimental results provide theoretical guidance for the preparation of Ti3C2composite fibers, and also expand the application of electrospun EVOH and EVOH/Ti3C2fibrous membranes.
研究领域:
材料科学
·
纳米技术
✓ 已验证
DOI
PubMed
高影响因子
MOLECULES
·
2022
·Vol. 27
·期 13
·4177
·
IF 4.927
Yujian Zhang,Kuanjun Fang,Wei Wang,Haitao Niu
With the ever-growing concern about environmental conservation, green production and water-based nanofibers have attracted more and more interest from both academic and industrial fields; nevertheless, the stabilization process of water-based nanofibers is primarily relying on the application of organic solvent-based crosslinking agents. In this work, we develop a green approach to fabricate water-resistant polyvinyl alcohol (PVA) nanofibers by using a water-based epoxy compound, N1, N6-bis(oxiran-2-ylmethyl) hexane-1,6-diamine (EH), as the crosslinker. This EH/sodium carbonate/sodium bicarbonate (CBS) solution system can break down large aggregates of PVA molecules into small ones and promote the uniform distribution of EH in the solution, resulting in the improved stability of crosslinked PVA nanofibers. We firstly report that the uniform dispersion of crosslinking agents in the electrospinning solution plays a vital role in improving the stability of spinning solutions and the water resistance of crosslinked PVA nanofibers by comparing crosslinking performances between water-based epoxy and conventional water-based blocked isocyanate (BI). This work could open up a novel strategy and green approach for the stabilization of water-based nanofibers.Keywords:crosslinking;electrospinning;epoxy;polyvinyl alcohol;water resistance
研究领域:
材料科学
·
环境科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Wanzheng Ren,Jian Pan,Wenqiang Gai,Xinyu Pan,Haimei Chen,Jiao Li,Lilan Huang
A crucial step in the purification and recycling of industrial waste oil is the separation and removal of trace water from emulsified oil. After optimizing the polymer content, solvent composition, and SiO 2 nanoparticle addition amount of the spinning precursor solution, a Polyvinylidene fluoride- co -trifluoroethylene chloride (PVDF-CTFE)/SiO 2 nanofibrous membrane with micro and nano-rough structure was prepared by electrospinning. Using scanning electron microscopy, a pore size analyzer, a contact angle tester, a single-fiber strength tester, and a gravity separation experiment, the influence of SiO 2 addition on the morphology, pore size distribution , wettability , mechanical, and separation properties of the modified membranes was characterized. The results demonstrated that the water contact angle of the nanofibrous membrane was increased to 151.3° of superhydrophobic when SiO 2 was added at a concentration of 2.5 wt%. The nanofibrous membranes exhibited outstanding separation performance (>99%) for water-in-oil mixtures and emulsions, as well as for various oil-water systems. Moreover, the PVDF-CTFE/SiO 2 nanofibrous membranes exhibited superior multi-cycle performance and consistent chemical resistance. This research yielded a novel material and a straightforward method for fabricating superhydrophobic nanofibrous membranes, which demonstrated greater application potential in oil-water separation.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2023
·Vol. 14
·期 1
·64
·
IF 5.3
Dongshuang Wu,Yidan Chen,Yuelei Bai,Chuncheng Zhu,Mingyi Zhang
Producing oxygen and hydrogen via the electrolysis of water has the advantages of a simple operation, high efficiency, and environmental friendliness, making it the most promising hydrogen production method. In this study, La0.2Sr0.8Cu0.4Co0.6O3−δ(LSCC) nanofibers were prepared by electrospinning to utilize non-noble perovskite oxides instead of noble metal catalysts for the oxygen evolution reaction, and the performance and electrochemical properties of LSCC nanofibers synthesized at different firing temperatures were evaluated. In an alkaline environment (pH = 14, 6 M KOH), the nanofibers calcined at 650 °C showed an overpotential of 209 mV at a current density of 10 mA cm−2as well as good long-term stability. Therefore, the prepared LSCC-650 NF catalyst shows excellent potential for electrocatalytic oxygen evolution.Keywords:perovskite;OER;nanofiber;electrospinning
研究领域:
材料科学
·
电化学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）