Enhanced molybdenum extraction and purification from acidic lixivium using organophosphorus extractants
Solvent extraction with organophosphorus extractants has potential as a low-cost method for efficient Mo recovery for acidic leaching solutions. However, improved selectivity is required to obtain high-purity Mo products. In this study, various acidic organophosphorus extractants were compared, and 2-ethylhexylphosphonic acid mono-(2-ethylhexyl) ester (P507) was found to be optimal for efficient Mo extraction and Fe separation from acidic leaching solutions. Under the optimized conditions (40 vol% P507, 3:1 organic/aqueous, 20 °C, 5 min), the Mo and Fe extraction efficiencies reached 98.1 % and 35.2 %, respectively, with a separation factor of 90.1. The Mo/Fe separation efficiency was further improved using a two-stage countercurrent extraction method. The Mo extraction efficiency was attributed to coordination bonds (P = O → Mo) formed between Mo(VI) oxycations and P507 dimers, as well as covalent bonds (P O Mo) formed by substituting the hydrogen ions in P507. Increasing the H 2 SO 4 concentration in the leaching solution gradually transformed MoO 2 2+ into Mo 2 O 5 2+ dimers, which formed MoO 2 (HA 2 ) 2 and Mo 2 O 5 (HA 2 ) 2 metal complexes during the extraction process. HCl scrubbing of the loaded organic phase effectively removed Fe. For subsequent ammonia stripping of the HCl-scrubbed organic phase, the optimal ammonia concentration was 1.25 mol/L. Further increasing the ammonia concentration promoted the saponification reaction of ammonia with P507, thereby reducing the Mo stripping efficiency. In summary, using multistage countercurrent extraction, increasing the H 2 SO 4 concentration in the leaching solution, and scrubbing the loaded organic phase with HCl facilitate efficient Mo/Fe separation, providing a feasible approach for the preparation of high-purity ammonium molybdate with broad application prospects.
危险品化学品经营许可证（带存储）