The corrosion inhibition effect of 3-amino-5-mercapto-1,2,4-triazole (AMT) on AA2024 aluminium alloy in 3.5 wt.% NaCl solution was investigated, and the corrosion inhibition mechanism was revealed. The influence of AMT concentration on the corrosion inhibition performance was evaluated by potentiodynamic polarization curve and electrochemical impedance spectroscopy (EIS). Surface analysis and surface-enhanced Raman scattering (SERS) spectra were used to study the adsorption process and corrosion inhibition mechanism of AMT on the alloy surface. Polarization curve and EIS results showed that when the AMT concentration was 1.5 g/L, the corrosion current density (icorr) was the lowest and the resistance of adsorption film (Rf) was the largest, illustrating the highest corrosion inhibition efficiency. Moreover, the adsorption kinetics process of AMT was revealed by SERS measurement, and a positive correlation between the SERS intensity and Rf values of AMT after different immersion time was achieved. It indicated that the efficient adsorption of corrosion inhibitors significantly enhanced the corrosion inhibition performance. Density functional theory (DFT) and molecular dynamics simulations were used to give further insight into the adsorption and inhibition mechanism of AMT on the aluminium alloy surface.
A novel adsorbent was synthesized via modifying silica nanoparticles with 3-Amino-5-mercapto-1,2,4-triazole and was used to selectively adsorb silver ions from aqueous solutions. The adsorbent was confirmed by Fourier transform infrared spectroscopy , X-ray photoelectron spectroscopy, transmission electron microscope and Brunauer-Emmett-Teller (BET) surface area analysis. Batch adsorption experiments were carried out to evaluate the adsorption conditions, reusability and selectivity . The results showed that the optimum pH is 5 and the maximum adsorbability was 124.52 mg/g. The adsorption rate was very high and equilibrium was achieved within 20 min. The total adsorption process preferably followed the pseudo-second order kinetics and the Langmuir isotherm model. The sorbent was stable and efficient. After used five times, the adsorbability was 98.72% of the initial adsorbability. Moreover, the adsorbent adsorb selectively Ag + from coexisting ions in aqueous solution.
危险品化学品经营许可证（带存储）