文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

346,364+ SCI 论文 与阿拉丁产品引用相关
2,295,288.15 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

热门产品

视图 列表 网格

显示第1至12个,产品总数45个

设置提升方向
3-氯酚
JOURNAL OF CHEMICAL AND ENGINEERING DATA · 2011 · IF 2.089

Selective Removal of 3-Chlorophenol from Aqueous Solution Using Surface Molecularly Imprinted Microspheres

Xue Wang,Jianming Pan,Wei Guan,Jiangdong Dai,Xiaohua Zou,Yongsheng Yan,Chunxiang Li,Wei Hu

A simple method for selective recognition of 3-chlorophenol (3-CP) from aqueous solution has been developed using a surface molecularly imprinted polymer (MIP) as sorbent. Characterization of the obtained MIP was achieved by Fourier transform infrared spectroscopy (FTIR). Kinetic, thermodynamic, dynamic adsorption, and selectivity experiments were investigated in this study. Kinetic experimental data were well-described by the pseudosecond-order kinetic model. The obtained Arrhenius activation energy Ea from the kinetic data indicated a physisorption mechanism, and the negative values of ΔHo demonstrated that the adsorption of 3-CP onto MIP was exothermic. Equilibrium experimental data of MIP fitted the Langmuir isotherm well. The MIP showed outstanding affinity toward 3-CP in aqueous solution, and the optimum pH value for binding has been found around the neutral range. When methanol was used as eluent, the adsorbed 3-CP eluted easily from MIP. The total dynamic capacity of the imprinted sorbent was calculated to be 1137.58 mg·g–1. The breakthrough of 3-CP started after 60 mL, and the breakthrough capacity was 756.8 mg·g–1. Meanwhile, selectivity experiments demonstrated that MIP showed high affinity to target molecules over competitive CPs (2,6-dichlorophenol and 2,4,6-trichlorophenol).

CAS / MDL: 97-90-5
研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2012 · IF 3.461

Pd/Al bimetallic nanoparticles for complete hydrodechlorination of 3-chlorophenol in aqueous solution

Bo Yang,Shubo Deng,Gang Yu,Yonghong Lu,Hong Zhang,Jianzhong Xiao,Gang Chen,Xiaobing Cheng,Lili Shi

Nanoscale Al particles with average diameter of about 100   nm were employed to prepare Pd/Al nanoparticles (NPs) by chemical displacement deposition. It was proved that Pd 2+ acidic deposition solution was superior to its alkaline deposition solution in terms of Pd loading rate on Al NPs. The Pd/Al NPs were characterized by ICP–OES, SEM, TEM, XRD, BET and then used to explore hydrodechlorination (HDC) performance of 3-chlorophenol (3-CP) in aqueous solution. Major factors affecting HDC efficiency were investigated including Al substrate sizes, pH, Pd loadings in Pd/Al NPs, dosage of Pd/Al NPs, and temperature. The optimal results indicated that nanoscale Pd/Al bimetallic particles were highly effective for 3-CP HDC. HDC efficiency was only about 30% in 50   min reaction with micron sizes of Pd/Al particles (100–400 mesh), whereas it increased to 99.7% within 30   min using Pd/Al NPs at 25   °C. Aqueous pH presented remarkable effect on HDC and pH 3–4 was the optimum range for HDC as pH varied from 2 to 11. Pd loadings and Pd/Al dosages were optimized for highly effective HDC as 1.16   wt.% and 2   g/L, respectively. In addition, higher HDC performance was obtained while reaction temperature arrived at 45   °C and 0.389   mM of 3-CP could be completely dechlorinated into phenol only within 10   min reaction.

CAS / MDL: 7429-90-5
研究领域: 环境科学 · 纳米技术 · 化学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
WATER RESEARCH · 2024 · IF 11.4

The critical role of electron donating rate of pyrogenic carbon in mediating the degradation of phenols in the aquatic environment

Liang Zeng,Sizhe Yang,Quan Chen,Wang Fu,Min Wu,Patryk Oleszczuk,Bo Pan,Baoshan Xing

Phenols are the widely detected contaminants in the aquatic environment. Pyrogenic carbon (PyC) can mediate phenols degradation, but the specific properties of PyC or phenols influencing this reaction remain unknown. The present study investigated the kinetic process and mechanism of removal of various phenols by different PyC in aqueous phase system. To avoid the impact of the accumulated degradation byproducts on the overall reaction, we conducted a short-term experiment, quantified adsorption and degradation, and obtained reaction rate constants using a two-compartment first-order kinetics model. The adsorption rate constants ( k a ) of phenols by PyC were 10-220 times higher than degradation rate constants ( k d ), and they were positively correlated. Interestingly, no correlation was found between k d and common PyC properties, including functional groups, electron transfer capacities, and surface properties. Phenols were primarily attacked by •OH in the adsorbed phase. But neither the instantly trapped •OH, nor the accumulated •OH could explain phenol degradation. Chemical redox titration revealed that the electron transfer parameters, such as the electron donating rate constant ( k ED ) of PyC, correlated well with k d (r>0.87, P < 0.05) of phenols. Analysis of 13 phenols showed that E gap and E LUMO negatively correlated with their k d , confirming the importance of the electronic properties of phenols to their degradation kinetics. This study highlights the importance of PyC electron transfer kinetics parameters for phenols degradation and manipulation of PyC electron transfer rate may accelerate organic pollutant removal, which contributes to a deeper understanding of the environmental behavior and application of PyC systems.

研究领域: 环境科学 · 化学
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2025 · IF 3.9

Synthesis of Chlorinated Polyphosphazenes with Improved Interfacial Strength for Novel Flexible Heat Shielding Materials

Yang Zheng,Tongkui Yue,Guanghui Cui,Yi Sun,Wei Liu,Jun Liu,Zhanpeng Wu

The interfacial interaction between fibers and polyphosphazene is a crucial factor for efficient ablative resistance. Herein, a series of polyphosphazenes with aryloxy and substituted-aryloxy side groups were designed and synthesized, guided by molecular dynamics simulation. Effects of the type and position of the substitutions on properties of polyphosphazenes such as glass transition temperature (Tg) were investigated. The introduction of polar chlorine-substituted side groups increases the interfacial interaction of polyphosphazenes with fibers, as evidenced by the binding energy and the number of hydrogen bonds, and the composites exhibited enhanced mechanical and ablative properties. The linear ablation, mass ablation, and charring rate of the composite reach 0.0148, 0.041, and 0.088 mm/s, respectively, which is superior to the composites using conventional rubbers as the matrix. These results make the chlorinated polyphosphazene a competitive candidate for thermal protection under the high-temperature service environment of vehicles and rockets.

研究领域: 材料科学 · 航天工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

Enhanced catalytic performance induced by synergistic interaction between Pd species with NiAl2O4 spinel support for aqueous-phase hydrodechlorination of 4-chlorophenols

Zheng Li,Jiehao Xie,Zipin Peng,Zhuo Ma,Yihui Li,Xingkun Chen,Yuan Tan,Wenshao Yang,Yunjie Ding

4-Chlorophenol (4-CP) is a pervasive environmental pollutant commonly found in wastewater and groundwater, posing great risks to both human health and the ecosystem. Catalytic hydrodechlorination (HDC) of 4-CP by utilizing hydrogen (H 2 ) as a reductant has emerged to be an efficient and sustainable way to treat pollutant water. This study focuses on the development of an efficient and stable Pd-based catalyst for the catalytic HDC of 4-CP. By incorporating an appropriate amount of Ni into Al 2 O 3 support, a NiAl 2 O 4 (NA) spinel was synthesized, enhancing the interaction between Pd and the support, leading to precise control over Pd species and oxygen vacancies. The tailored properties of the Pd/NA-1 catalyst result from meticulous adjustment of the Pd 2+ /Pd 0 ratio and oxygen vacancies, which promotes electron transfer from Pd to Ni within the NiAl 2 O 4 spinel. In comparison to the Pd/Al 2 O 3 catalyst, the Pd/NA-1 catalyst exhibits exceptional stability, with continuous operation for over 120 h without deactivation. Comprehensive characterization analyses indicate that the Pd/NA-1 catalyst effectively prevented the aggregation of Pd nanoparticles, maintaining the Pd 2+ /Pd 0 ratio at 1, which is crucial for its superior stability. This work provides valuable insights into the development of Pd-based catalysts for HDC reactions, highlighting the potential use of Pd/NA-1 catalysts in treating hazardous pollutants like 4-CP in waste systems.

研究领域: 环境科学 · 催化化学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Growth of quinoline-linked covalent organic frameworks on electrospun nanofibers with enhanced adsorption on chlorinated phenols

Xiaowen Jiang,Junteng Zhao,Tong Yu,Yijun Li,Xiwen He,Langxing Chen,Yukui Zhang

Covalent organic frameworks (COFs) have attracted increasing interest as adsorbents in water treatment,   but the lack of high-performance adsorbents materials and effective morphological structures limits their practical application. In this work, a novel quinoline-linked COFs (COF-QL-Ph) with high crystallinity was synthesized by post-synthetic-modification (PSM). Firstly, the precursor organic ligands of imine-linked COFs were directly electrospinning with polyacrylonitrile (PAN) solution as the seeded nanofibers. Subsequently, the imine-linked COFs formed from 1,3,5-benzenetricarboxaldehyde (TFB) and 2,6-diaminonaphthalene (2,6-DAN) were grown on the seeded PAN nanofibers. Finally, self-supporting imine-linked COFs hollow nanofibers were obtained by etching the polymeric substrates. These were then transformed into quinoline-linked COF-QL-Ph nanofiber through the Povarov reaction between phenylacetylene and the matrix imine-linked COFs. The resulting COF-QL-Ph nanofibers exhibit a developed hollow structure and high porosity for effective adsorption of chlorinated phenols in water. The adsorption behavior of 2,4-dichlorophenol (2,4-DCP) on COF-QL-Ph nanofibers followed the Langmuir model, and the maximum adsorption capacity was 616.9 mg g −1 . The abundant benzene rings and quinoline structures in COF-QL-Ph nanofibers provided a great number of sites for the interaction with 2,4-DCP, which were confirmed by simulation and adsorption characterization. As expected, the self-supporting hollow structure of COF-QL-Ph nanofibers greatly improved the mass transfer rate of adsorbed analytes and accelerated the kinetic process. Furthermore, COF-QL-Ph nanofibers exhibited good structural stability and high recovery performance after six adsorption–desorption cycles. Thus, COF-QL-Ph nanofiber represents a highly promising adsorbent suitable for purifying chlorinated phenols in environmental waters.

研究领域: 环境科学 · 材料科学 · 化学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

Generation of dichloroacetonitrile with the co-presence of g-C3N4 and chloride in peroxymonosulfate/Vis system: Impacts and mechanism

Zhiwei Zhao,Yu Li,Fei Wang,Zhitao Xu,Sai Zhang,Li Li,Junyu Fan,Jie Liu

Monitoring and regulating the formation of toxic byproducts in advanced oxidation processes (AOPs) is of great significance for their practical application in water treatment. In this work, we found that dichloroacetonitrile (DCAN), a common N-containing byproduct in chloramination disinfection, can be formed with the co-presence of g-C 3 N 4 and chloride in a peroxymonosulfate (PMS) system. The measured value was 12.01 μM within 12 h under the given conditions. Structure analysis of raw and used g-C 3 N 4 demonstrated that g-C 3 N 4 decomposition indeed occurred, and C = N bonds acted as primary active sites, releasing N resources for subsequent DCAN formation. Additionally, multiple parameters, including the reactant (i.e., g-C 3 N 4 , PMS, Cl - , phenol) dose and solution pH, were observed to remarkably affect the yield of DCAN. Phenol was identified as the organic precursor of DCAN and may cooperate with inorganic chloramine to promote DCAN formation via the decarboxylation pathway. This study highlights the generation of DCAN in N-involved catalyst-based AOPs and improves understanding of the DCAN formation mechanism.

研究领域: 环境科学 · 化学工程
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2024 · IF 8

Introduction of Lewis acid sites to endow cobalt phosphide with peroxidase-like and oxidase-like activities and application in colorimetric sensing analysis

Yanqing Cong,Yudi Wang,Dongchen Lv,Jiayi Gao,Kuangda Chen,Sainan Sun,Xiaoran Wang,Shi-Wen Lv

With more and more attention to health, developing a simple and effective method for detecting phenolic compounds is an urgent and challenging task. In this context, Mn-doped CoP (referred to as Mn-CoP) with a nanocage interior architecture has been successfully constructed. The formation of a hollow structure exposes more active sites, while the incorporation of Mn ion reduces the charge transfer resistance and accelerates the charge transfer. Consequently, Mn-CoP effectively provides electrons to activate H 2 O 2 and O 2 producing OH • and O 2 • , demonstrating excellent peroxidase-like and oxidase-like activities. Given its strong oxidase-like activity, Mn-CoP enables a straightforward colorimetric assay for detecting hydroquinone using 3,3′,5,5′-tetramethyl benzidine (TMB) as colorimetric substrate. Interestingly, the developed colorimetric detection method exhibits a broad linear range and a low limit of detection (LOD) for hydroquinone, showing good potential for application even in real samples. Detailed analyses reveal that the doped Mn ions serve as Lewis acid sites directly reacting with the amino functional group in TMB. The Lewis acid-base reaction between Mn-CoP and TMB is crucial for the chromogenic reaction of TMB. Moreover, doping Mn ion to enhance the oxidase-like activity of the nanozyme is a simple and feasible modification strategy with universal applicability. This work provides a valuable reference for designing nanozymes with oxidase-like activity.

研究领域: 生物化学 · 分析化学 · 纳米材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHEMICAL JOURNAL · 2024 · IF 4.9

Spatial confinement of Mn3O4 in hollow carbon sphere to boost the oxidase-like activity for colorimetric sensing analysis of hydroquinone and hexavalent chromium

Yifan Shao,Sainan Sun,Xinyun Li,Liwen Fan,Xinyi Shen,Yanqing Cong,Shi-Wen Lv

It is very meaningful to develop simple and effective methods for detecting hazardous substances. Herein, a newly-designed Mn 3 O 4 -based composite with oxygen vacancy is synthesized and employed as oxidase-like mimic for conducting chromogenic analysis. After loading Mn 3 O 4 in hollow carbon sphere (HCS), the hydrophobicity of Mn 3 O 4 is remarkably enhanced, thereby creating a microscopic three-phase interface to boost the capturing ability towards O 2 . Interestingly, hollow structure of HCS can provide the spatial confinement effect for Mn 3 O 4 , shortening mass transfer process and improving catalytic activity. Thus, HCS/Mn 3 O 4 composite possesses low interfacial resistance and rapid charge transfer rate. More importantly, HCS/Mn 3 O 4 composite can simulate the activity of oxidase-like mimics, which can oxidize colorless 3,3′,5,5′-tetramethyl benzidine (TMB) to blue oxidized TMB (oxTMB) in a short time. Further analysis indicates that O 2 •− plays an important role, and the direct oxidation of TMB over HCS/Mn 3 O 4 composite also plays a part in the color reaction of TMB. Based on the cascade reactions among TMB, HCS/Mn 3 O 4 and target compound (namely hydroquinone and Cr 6+ ), a simple chromogenic sensing method with broad linear range and low LOD for detecting hydroquinone and Cr 6+ is proposed. In short, current study can give a valuable reference for the design of enzyme mimics and the research on chromogenic mechanism.

研究领域: 材料科学 · 分析化学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2026 · IF 10.4

Modulation of cobalt spin state to enhance enzyme-like activity of cobaltous oxide for colorimetric sensing analysis of phenolic compound

Zihan Xu,Ziyi Guo,Shengran Yu,Xinyi Shen,Yanqing Cong,Tong Wei,Wenming Pei,Shi-Wen Lv

Herein, a novel porous S-CoO/C composite with spatial confinement effect is synthesized. Notably, doped sulfur can have the reaction with Co site of CoO and trigger the d-p orbital hybridization between 3p orbital of sulfur and 3d orbital of cobalt. The d-p orbital hybridization effect can not only increase the content of oxygen vacancy, but also drive the transformation of Co sites from low to high spin states. Benefitting from these changes, more unpaired electrons are generated in S-CoO/C. As a result, the S-CoO/C exhibits moderate oxidase-like property and excellent peroxidase-like activity. In view of the superb peroxidase-like activity of S-CoO/C, a colorimetric assay is proposed for detecting H 2 O 2 and hydroquinone using TMB as the substrate, and developed detection methods have great advantage being a low LOD, a high recovery and a broad linear range. Furthermore, established colorimetric assay displays excellent analysis performance even in real samples.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2025 · IF 9.7

Solar-powered enzymatic-photoelectrocatalytic system constructed with three-dimensional dual photoelectrodes for highly efficient purification of coking wastewater

Jianqiao Liu,Jinli Wang,Jiang Guo,Kai Yan,Jingdong Zhang

The coupling of photoelectrocatalysis (PEC) and enzymatic catalysis was explored for efficient treatment of practical phenol-containing coking wastewater outdoors. The developed enzymatic-photoelectrocatalytic (EPEC) system consisted of three-dimensional dual photoelectrodes fabricated with carbon fiber cloth (CFC), namely a CFC-supported WO 3 photoanode with oxygen vacancies and a CFC-supported Au-BiOBr photocathode with immobilized horseradish peroxidase (HRP). The experimental results and computational fluid dynamics study revealed that dual CFC-based photoelectrodes with three-dimensional network structures could optimize the fluid diffusion on the electrode surface and enhance the efficiency of pollutant degradation. Further investigation indicated that the introduction of oxygen vacancies promoted the PEC oxidation activity of the WO 3 photoanode while the Au nanoparticles modification was favorable to improving the immobilization of HRP and PEC generation of H 2 O 2 on BiOBr photocathode. Moreover, photovoltaic (PV) cells were integrated in the EPEC system to provide applied potential and promote the utilization of solar irradiation. The mineralization rate of coking wastewater reached 88.5% using the PV-integrated EPEC system driven by natural solar energy, which demonstrated potential for treating actual industrial wastewater.

研究领域: 环境科学 · 电化学 · 废水处理 · 可再生能源 · 催化
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ADSORPTION SCIENCE & TECHNOLOGY · 2012 · IF 0.606

Selective Removal of 2,4-Dichlorophenol by Surface Molecularly Imprinted Polymers Based on Amino-Functionalized Fe3O4@SiO2 Composites

Jinyu Chu,Bing Wang,Yujun Song,Xiaohua Zou,Chunxiang Li,Yongsheng Yan

A highly selective imprinted amino-functionalized Fe3O4@SiO2 sorbent was prepared by surface molecular imprinting technique for selective removal of trace 2,4-dichlorophenol (2,4-DCP) in water samples. The 2,4-DCP-imprinted amino-functionalized Fe3O4@SiO2 sorbent was characterized by Fourier transform infrared, transmission electron microscopy, vibrating sample magnetometer, thermogravimetric analysis and batch-mode binding studies. The imprinted functionalized Fe3O4@SiO2 sorbent exhibited high selectivity and offered a fast kinetics for the adsorption of 2,4-DCP. The prepared sorbent was shown to be promising for selective removal of trace levels of 2,4-DCP in environmental water samples.

研究领域: 环境科学 · 材料科学
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。