Study on the milling processes and sintering properties of Ag/SnO2 electrical contact material with different micro-structured SnO2 powders
Different micro-structured SnO 2 powders were synthesized by hydrothermal and chemical co-precipitation methods. The influence of milling process and sintering parameters on the physical properties of Ag/SnO 2 electrical contact materials was investigated. The microstructure and physical properties of Ag/SnO 2 electrical contact materials were characterized by X-ray Diffraction, Scanning Electron Microscopy and Conductivity analyzer. The results showed that spherical SnO 2 (s) powders with a diameter about 2 μm were synthesized. With increased milling time, there was a slight decrease in the average sizes of Ag/SnO 2 (s) powders, but no significant difference. The optimal density of 9.545 g∙cm −3 and resistivity of 2.67 μΩ∙cm of Ag/SnO 2 (s) electrical contact materials were obtained after sintering at 860 °C for 6 h in air atmosphere. The promotion of sintering densification and improvement of physical properties of Ag/SnO 2 (s) contact may be due to the combined effects of mechanical activation energy and higher sintering temperature. Using the finite element method, simulation models were developed to interpret the effects of different micro-structured SnO 2 powders on the physical properties of Ag/SnO 2 materials. Graphical abstract
危险品化学品经营许可证（带存储）