Journal of Materials Chemistry B
·
2018
·Vol. 6
·期 47
·7862-7870
·
IF 4.776
Jian Chen,Dongya Zhang,Yan Zou,Zhongjie Wang,Mingcong Hao,Meng Zheng,Xue Xue,Xiaoxi Pan,Yiqing Lu,Jiefei Wang,Bingyang Shi
Nanohybrids fabricated with upconversion nanoparticles (UCNPs) and gold nanoparticles (NPs) hold great promise for near-infrared photothermal therapy (NIR-PTT) and upconversion fluorescence imaging. However, the obstacles of poor solubility in water and finite hydrophilic modification method for UCNPs limit their application in biological fields. Herein, we report a novel UCNP@Al(OH)3/Au nanohybrid mediated by a highly hydrophilic and biocompatible Al(OH)3 layer to realize a synergistic targeted PTT and fluorescence imaging capability to U87MG tumor-bearing mice under NIR light irradiation. The modification with Al(OH)3 layers can improve the water solubility of UCNPs. And cytotoxicity assays and hemolysis assay showed that the modification with Al(OH)3 layers makes UCNPs have low cytotoxicity and good biocompatibility. In addition, the Al(OH)3 layers are thin enough to allow fluorescence resonance energy transfer (FRET) between UCNPs and gold NPs to occur, giving the NPs a good PTT effect for tumor-bearing mice. Meanwhile, as the pH-sensitive Al(OH)3 layers decompose in acidic tumor microenvironments with Au NPs detached from their surface, the FRET effect no longer occurred, subsequently leading to the fluorescence intensity of naked UCNPs being recovered for good imaging effects. The study suggests that Al(OH)3 mediation layer as a promising hydrophilic nanoplatform can potentially be used for the preparation of superior hydrophilic NPs and pH-stimulated drug release carriers for theranostic application in vivo.
研究领域:
生物医学工程
·
纳米医学
·
肿瘤学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2018
·Vol. 102
·期 3
·1414-1424
·
IF 2.956
Yaowu Wei,Tao Zhang,Qi Zhang,Bingqiang Han,Nan Li
Improving the hydration resistance of CaO aggregates is the key to successful application of lime-based refractories in metallurgical industry. Additive Zr(OH) 4 and Al(OH) 3 were introduced in the preparation of CaO granules using granulation equipment and calcination method in this study. The results showed that the hydration resistance of CaO granules was improved significantly, especially for granules with 0.6 wt.% Zr(OH) 4 and 0.9 wt.% Al(OH) 3 , respectively. The shell of CaO granules was relatively dense after calcination and the volume of open pores of CaO granules decreased from 3.56 × 10 −2 to 1.80 × 10 −2 cm 3 /g when additive was introduced. Zr(OH) 4 and Al(OH) 3 have the opposite effect on the closed porosity of CaO granules, the closed porosity of CaO granules was decreased with Zr(OH) 4 addition, but increased with Al(OH) 3 addition.
研究领域:
材料科学
·
冶金工程
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Peng Zu,Haoning Li,Guangming Yan,Gang Zhang
In this study, Ti 3 C 2 T x layers with an average lateral size of approximately 8.3 μm were prepared. The LLM composite membranes synthesized from these layers not only possessed long and narrow mass transfer channels but also further prevented the generation of internal non-selective defects. Additionally, a strategy of compositing these Ti 3 C 2 T x layers and Al(OH) 3 was adopted. The strategy contributed to expanding the interlayer distances of the composite membranes and adjusting the in-plane stacking order, thereby facilitating the construction of mass transfer channels characterized by high permeance within the membranes. This resulted in the preparation of LLMA membranes. Among these LLMA membranes, the LLMA-1:7 composite membranes displayed outstanding performance in the sieving process. Their permeances were more than 10 times higher than those of the LLM membranes (with a thickness of 1 μm). Also, the rejection ratio for CV dye could even exceed 99 %, and the operational stability was also significantly improved. These advantages enabled them to avoid some of the shortcomings commonly found in two-dimensional (2D) separation membranes to a certain extent. In summary, the LLMA-1:7 composite membranes designed in this study demonstrated superior overall performance, compared to the majority of the previously reported 2D membranes. This research is expected to establish a solid foundation for the application of 2D MXene membranes in the field of water treatment.
研究领域:
材料科学
·
环境工程
✓ 已验证
产品关联
DOI
高影响因子
POWDER TECHNOLOGY
·
2021
·
IF 5.134
Chendong Zhang,Hangchen Li,Xinxin Guo,Shunchao Li,Han Zhang,Xuhai Pan,Min Hua
A new type of dry powder fire extinguishing agent was prepared, which was called composite superfine dry powder with Aluminum Trihydrate (CSFP-ATH). The CSFP-ATH was characterized by laser particle size analysis , scanning electron microscope (SEM), thermal gravity analyzer (TGA), transform infrared spectroscopy(FTIR) analyzer and differential scanning calorimetry (DSC). The extinguishing performance of different samples was examined in a small-scale experimental platform for the liquid hydrocarbon fire. The tests were proved that the fire-extinguishing performance was as follows: CSFP-ATH > superfine ABC dry powder(SFP) > commercial ABC dry powder(CDP). Besides, the mechanism, kinetics and thermochemical changes in the reaction process were calculated by Gaussian simulation, and the reaction path of the CSFP-ATH with free radicals in the flame was predicted. Experimental and theoretical studies have been proved that the addition of Al(OH) 3 can promote the fire extinguishing performance of superfine ABC dry powder.
研究领域:
材料科学
·
消防工程
·
化学动力学
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2024
·
IF 8.3
Jinpeng Hu,Dezhi Zhang,Wenbao Li,Yan Li,Guorong Shan,Min Zuo,Yihu Song,Ziliang Wu,Lie Ma,Qiang Zheng,Miao Du
Marine biofouling, resulting from the adhesion of marine organisms to ship surfaces, has long been a significant issue in the maritime industry. In this paper, we focused on utilizing soft and hydrophilic hydrogels as a potential approach for antifouling (AF) coatings. Acrylic acid (AA) with a polyelectrolyte effect and N-(3-sulfopropyl)-N-(methacryloxyethyl)-N,N-dimethylammonium betaine (SBMA) with an antipolyelectrolyte effect were selected as monomers. By adjusting the monomer ratio, we were able to create hydrogel coatings that exhibited low swelling ratio in both fresh water and seawater. The Al(OH)3 nanoparticle, as a physical cross-linker, provided better mechanical properties (higher tensile strength and larger elongation at break) than the chemical cross-linker through the dynamic coordination bonds and plentiful hydrogen bonds. Additionally, we incorporated trehalose into the hydrogel, enabling the repair of the hydrogel network through covalent-like hydrogen bonding. The zwitterion compound SBMA endowed the hydrogel with excellent AF performance. It was found that the highest SBMA content did not lead to the best antibacterial performance, as bacterial adhesion quantity was also influenced by the charge of the hydrogel. The hydrogel with appropriate SBMA content being close to electrical neutrality exhibits the strongest zwitterionic property of PSBMA chains, resulting in the best antibacterial adhesion performance. Furthermore, the pronounced hydrophilicity of SBMA enhanced the lubrication of the hydrogel surface, thereby reducing the friction resistance when applied to the hull surface during ship navigation.
研究领域:
材料科学
·
海洋生物学
·
生物医学工程
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2024
·
IF 4.9
Yang Xiao,Lin Zhang,Bin Wei,ChangFeng Lu,Ling Li
Generally, modification of materials by adding multiple types of nano particles could cause dispersion problems, generally limited the performance improvement effect. Herein, we report the modification of UHMWPE materials by organic-inorganic core-shell particles with PTFE as the core and Al(OH) 3 as the shell, which prepared by in-situ polymerization of sodium bicarbonate and aluminum sulfate solution . Core-shell particles were filled in UHMWPE matrix and sintered into composite by spark plasma sintering (SPS). The mechanical and tribological properties of the composites were characterized by tensile compression testing machine, universal micro tribometer (UMT-5), three-dimensional white light interferometer and scanning electron microscope (SEM). The results showed that the addition of core-shell structural materials effectively improved the tribological properties (friction coefficient decreased by 40%, wear rate decreased by 30%) and mechanical properties (compression strength increased by 2.4 times) of the composites. It was demonstrated that the inorganic framework provided strength to improve the mechanical properties and wear resistance of materials, and the organic phase was used as a lubricating phase to reduce the friction coefficient of materials. Surface treatment of core-shell particles both improved the binding between particles and matrix and decreased the formation of agglomerations, thus significantly reducing ploughing phenomena’s effect produced by abrasive wear of agglomeration
研究领域:
材料科学
·
机械工程
✓ 已验证
产品关联
DOI
高影响因子
Advanced Composites and Hybrid Materials
·
2024
·Vol. 7
·期 2
·1-21
·
IF 23.2
Kang Xiheng,You Zi,Huang Yongheng,Peng Jian,Zhang Junhua,Ragauskas Arthur J.,Zhang Zhanying,Song Xueping
This work provides an innovative method for preparing different isomerization catalysts by impregnating different proportions of MgCl 2 and AlCl 3 and combining different K compounds on cellulose-derived biochar, followed by pyrolysis. Results show MgO and Al(OH) 3 existing in 4 Mg- 1 Al-C catalyst can obtain better catalytic effect on glucose isomerization than the singe of Al presenting in 0 Mg- 1 Al-C catalyst. Moreover, the synergism effects of the multi-catalytic active sites such as β- , γ-Al(OH) 3 , KCl, MgO, and K 4 H 2 (CO 3 ) 3 in Mg-Al-KHCO 3 -C catalyst can further lead to an increase in glucose isomerization, compared to the 4 Mg- 1 Al-C catalyst. The X-ray diffraction results present that the value of O/Al in Mg-Al-KHCO 3 -C catalyst is as high as 13.38, which provides many unsaturated acidic catalysis sites and benefits the glucose isomerization. Simultaneously, the TPD results reveal that the main active sites (MgO, Al(OH) 3 , and K 4 H 2 (CO 3 ) 3 ) in Mg-Al-KHCO 3 -C catalyst can provide weakly acidic and basic sites and avoid strongly acidic and basic sites to excessively attack the glucose. Based on the DFT analysis, the results indicate that the MgO has a great effect on the ring-opening reaction to form acyclic glucose, while Al(OH) 3+ has a great effect on promoting acyclic glucose hydrogen transfer isomerized to form fructose. Compared to other carbon-based metal catalysts, the prepared Mg-Al-KHCO 3 -C has excellent catalytic performance, which gives a higher fructose yield (38.7%) and selectivity (87.72%) and glucose conversion (44.12%) at 100 °C in 30 min. In this study, we develop a highly efficient Mg-Al-K-biochar catalyst for glucose isomerization and provide an efficient method for cellulose valorization.
研究领域:
化学工程
·
催化科学
·
生物质转化
✓ 已验证
DOI
高影响因子
CHEMICAL PHYSICS LETTERS
·
2020
·
IF 2.029
Xingkun Zhu,Nan Zou,Hongchang Pang,Peng Tian,Guiling Ning
A high-efficient composite of flame retardant (CFR) composed of an aluminum hydroxide (ATH) core and an aluminum phosphate (AP) flower-like shell was synthesized by an in-situ growth method, which is low cost and easy-to-handle. It has been demonstrated that flame retardancy and smoke suppression of (ethylene-vinyl acetate) EVA/CFR were enhanced compared to EVA/ATH attributed to the high-efficiency heat barrier and gas isolation of ceramic char residues mainly composed of Al 2 O 3 porcelain agents and AlPO 4 sintering aids. Thus, the novel hierarchical core-shell AlPO 4 @Al(OH) 3 might supersede the ATH as flame retardants.
研究领域:
材料科学
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2022
·
IF 6.364
Ling Pan,Ling He,Zibo Niu,Peng Xiao,Wei Zhou,Yang Li
In this work, Yb 4 Hf 3 O 12 ceramic, a typical rare-earth hafnate, was exposed to water vapor with Al(OH) 3 impurities at 1400 ℃, and microstructural evolution and corrosion mechanisms were investigated. The long-term corrosion can be divided into initial hydration and gasification of Hf 4+ and steady-state corrosion after the formation of Al 5 Yb 3 O 12 . In the initial stage, Hf 4+ and the surrounding O 2- tend to be hydrated and then volatilized in the form of Hf(OH) 4 , causing a metastable state of Yb 4 Hf 3 O 12 on the surface. Besides, the preferential corrosion of small grains, grain boundary, and specific crystal plane on the surface and sintered and densified grains result in varied corrosion behavior from the early linear law to the later parabolic law. In the steady-state corrosion stage, due to the consumption of Hf 4+ , more vacancies promote bonding and diffusion of Al 3+ to form corrosion product (Al 5 Yb 3 O 12 ), and during this stage, regrowth and shedding of the corrosion layer reach a dynamic balance.
研究领域:
材料科学
·
腐蚀与防护
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2018
·
IF 3.909
Haifeng Hu,Liu Yang,Zhen Lin,Xiaotong Xiang,Xiancai Jiang,Linxi Hou
A novel magnetic bioadsorbent beads composed of Fe 3 O 4 , chitosan, and Al(OH) 3 (Fe 3 O 4 /CS/Al(OH) 3 ) was synthesized by a modified solvothermal and in-situ reaction. The composite adsorbent was characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and vibrating sample magnetometer, respectively. Adsorption toward F − onto Fe 3 O 4 /CS/Al(OH) 3 was investigated as a function of Fe 3 O 4 concentration, initial solution pH, adsorbent dosage, initial fluorion concentration, co-existing ions in water and initial temperature. The addition of Fe 3 O 4 could enhance the adsorption properties of CS/Al(OH) 3 . The saturated adsorption capacity of magnetic Fe 3 O 4 /CS/Al(OH) 3 calculated from the Langmuir isotherm model was 76.63 mg/g at 298 K. The adsorption isotherm of F − followed Langmuir isotherm model and the adsorption kinetics fitted better to the pseudo-second order kinetic model. The influence of temperature confirmed that the adsorption was spontaneous and endothermic. The magnetic Fe 3 O 4 /CS/Al(OH) 3 beads could be easily separated from water under a low magnetic field.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
PubMed
高影响因子
POLYMERS FOR ADVANCED TECHNOLOGIES
·
2019
·Vol. 31
·期 2
·338-349
·
IF 2.162
Lei Yang,He-qing Fu
Based on the strong adsorption of the diphosphate group to Fe and Al ions, first, the Fe 3 O 4 and Al (OH) 3 nanoparticles were modified by alendronate sodium (ALN), and organic phosphorus coated nanoparticles (Fe 3 O 4 -ALN and Al (OH) 3 -ALN) with the active group ─NH 2 were prepared. Novel [ x Fe 3 O 4 –2 x Al(OH) 3 ]/waterborne polyurethane nanocomposite with superparamagnetism and excellent flame retardancy were prepared by in situ polymerization. The experimental results showed that when the content of Fe 3 O 4 -ALN increased, the M s increased. And the saturation magnetization reached 14.35 emu/g when the Fe 3 O 4 -ALN content was 10 wt%. The nanoparticle network formed by Fe 3 O 4 and Al (OH) 3 can prevent the melting deformation of waterborne polyurethane (WPU) composite film and reduce the burning area. And the dual physical protective layer formed by nanoparticle network and char layer can prevent the combustible gas contacting with oxygen and giving off combustion heat, which effectively reduced the heat and smoke gas release. When the content of x Fe 3 O 4 –2 x Al(OH) 3 was 20 wt%, the oxygen index of the composite was 28.4%, and the flame retardancy of nanocomposite was classified as V-0 rating in the UL-94 test.
研究领域:
材料科学
·
化学工程
·
纳米技术
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2017
·Vol. 134
·期 46
·45431
·
IF 1.86
Ya Liu,Peng Qian,Yang Yu,Li Xiao,Yongliang Wang,Shufeng Ye,Yunfa Chen
Heavy metal ions such as Cu 2+ and Pb 2+ impose a significant risk to the environment and human health due to their high toxicity and non-degradable characteristics. Herein, Al(OH) 3 -polyacrylamide chemically modified with dithiocarbamates (Al-PAM-DTCs) was synthesized using formaldehyde, diethylenetriamine, carbon disulfide, and sodium hydroxide for rapid and efficient removal of Cu 2+ and Pb 2+ . The synthesized adsorbent was characterized by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis, scanning electron microscopy–energy dispersive X-ray spectroscopy analysis, and transmission electron microscope measurements. Al-PAM-DTCs showed rapid removal of Cu 2+ (<30 min) and Pb 2+ (<15 min) with high adsorption capacities of 416.959 mg/g and 892.505 mg/g for Cu 2+ and Pb 2+ respectively. Al-PAM-DTCs also had high capacities in removing suspended solids and metal ions simultaneously in turbid bauxite suspensions. FTIR, thermodynamic study, and elemental mapping were used to determine the adsorption mechanism. The rapid, convenient, and effective adsorption of Cu 2+ and Pb 2+ indicated that Al-PAM-DTCs has great potential for practical applications in purification of other heavy metal ions from aquatic systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45431.
研究领域:
环境科学
·
材料科学
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）