Stable and efficient As2O3 removal from simulated flue gas using Al2O3/CaSiO3 prepared by anhydrous grinding and calcination method
CaSiO 3 exhibits good arsenic capture performance, but it falls short of meeting the actual needs of power plants due to its susceptibility to acidic gases that inhibit its arsenic capture ability. In this study, an Al 2 O 3 /CaSiO 3 adsorbent was prepared by combining the anhydrous grinding and calcining methods. Arsenic vapor capture was conducted in flue gas containing or free of SO 2 and HCl within the temperature range of 800–1000 ℃. The research indicated that the preparation method used in this study resulted in uniform Al 2 O 3 doping that was less prone to agglomeration, thereby creating a good pore structure. The Al 2 O 3 /CaSiO 3 adsorbent exhibited the strongest arsenic capture capacity when the atomic molar ratio of Al/Si was 1:5, with an arsenic capture amount of 871.2 mg/kg, which was significantly higher than the capture capacity of the control group calcium silicate . The doping of Al atoms altered the structure and charge distribution of CaSiO 3 silica-oxygen chains, resulting in the formation of Al active sites with higher adsorption energy, which is more favorable for the adsorption of arsenic. Although the Al 2 O 3 /CaSiO 3 adsorbent reacts with acidic gases to form CaSO 4 and CaCl 2 , which can inhibit arsenic capture, it still maintains a high arsenic capture rate. Al 2 O 3 /CaSiO 3 has excellent arsenic removal, sintering resistance, and acid resistance, making it a promising composite adsorption material for arsenic removal.
危险品化学品经营许可证（带存储）